115 research outputs found
Praktična sinteza regulatora za precizno pozicioniranje sustava pomične podloge
This paper presents a practical feedback controller design of a ball screw-driven table system for the microdisplacement positioning. Friction of the mechanism in the micro-displacement region has nonlinear elastic properties, unlike Coulomb and/or viscous friction in the macro-displacement, resulting in different positioning responses and frequency characteristics of the plant depending on the regions. In this paper, at first, a numerical simulator with a rolling friction model is adopted to reproduce the positioning behaviors in the micro-displacement region. Based on the simulator, the stability condition of positioning in the region is clarified on the basis of frequency characteristics and, then, appropriate parameters of feedback controller are practically designed to satisfy the required positioning performance. Effectiveness of the proposed design has been verified by a series of experiments using a prototype of ball screw-driven table positioning device.U radu je prikazana sinteza regulatora s povratnom vezom u sustavu za precizno linearno pozicioniranje pomične podloge pomoću kugličnih ležajeva. Za razliku od uobičajenih modela Coulombova i/ili viskoznog trenja, trenje razmatranog sustava ima izrazito nelinearna svojstva u području mikro-pomaka, što za posljedicu ima različite odzive pozicioniranja i frekvencijski karakteristike, ovisno o radnom području. U radu je prvo razvijeno numeričko simulacijsko okruženje zasnovano na modelu trenja kotrljanja u svrhu simuliranja ponašanja sustava pozicioniranja u području mikropomaka. Potom je, zasnivajući se na simulacijskom okruženju, pomoću frekvencijske karakteristike razjašnjen problem stabilnosti sustava u promatranom radnom području te su odabrani odgovarajući parametri regulatora koji poštuju uvjet stabilnosti i zadovoljavaju željenu kvalitetu odziva. Sinteza regulatora provedena je vodeći računa o praktičnoj primjenjivosti postupka. Učinkovitost predložene sinteze potvr.ena je nizom eksperimenata na prototipu sustava za precizno linearno pozicioniranje pomične podloge pomoću kugličnih ležajeva
Evolutionary continuous cellular automaton for the simulation of wet etching of quartz
Anisotropic wet chemical etching of quartz is a bulk micromachining process for the fabrication of micro-electro-mechanical systems (MEMS), such as resonators and temperature sensors. Despite the success of the continuous cellular automaton for the simulation of wet etching of silicon, the simulation of the same process for quartz has received little attention-especially from an atomistic perspective-resulting in a lack of accurate modeling tools. This paper analyzes the crystallographic structure of the main surface orientations of quartz and proposes a novel classification of the surface atoms as well as an evolutionary algorithm to determine suitable values for the corresponding atomistic removal rates. Not only does the presented evolutionary continuous cellular automaton reproduce the correct macroscopic etch rate distribution for quartz hemispheres, but it is also capable of performing fast and accurate 3D simulations of MEMS structures. This is shown by several comparisons between simulated and experimental results and, in particular, by a detailed, quantitative comparison for an extensive collection of trench profiles. © 2012 IOP Publishing Ltd.We are grateful to D Cheng and K Sato (Nagoya University, Japan) for providing part of the experimental data. We acknowledge support by the JAE-Doc grant form the Junta para la Ampliacion de Estudios program co-funded by FSE, the Ramon y Cajal Fellowship Program by the Spanish Ministry of Science and Innovation, NANO-IKER Project (IE11-304) from the ETORTEK program by the Basque Government and the Professor Partnership Program by NVIDIA Corporation.Ferrando Jódar, N.; Gosalvez Ayuso, MA.; Colom Palero, RJ. (2012). Evolutionary continuous cellular automaton for the simulation of wet etching of quartz. Journal of Micromechanics and Microengineering. 22(2). https://doi.org/10.1088/0960-1317/22/2/025021S222Hida, H., Shikida, M., Fukuzawa, K., Murakami, S., Sato, K., Asaumi, K., … Sato, K. (2008). Fabrication of a quartz tuning-fork probe with a sharp tip for AFM systems. Sensors and Actuators A: Physical, 148(1), 311-318. doi:10.1016/j.sna.2008.08.021Oh, H., Kim, G., Seo, H., Song, Y., Lee, K., & Yang, S. S. (2010). Fabrication of micro-lens array using quartz wet etching and polymer. Sensors and Actuators A: Physical, 164(1-2), 161-167. doi:10.1016/j.sna.2010.10.003Xing, Y., Gosálvez, M. A., & Sato, K. (2007). Step flow-based cellular automaton for the simulation of anisotropic etching of complex MEMS structures. New Journal of Physics, 9(12), 436-436. doi:10.1088/1367-2630/9/12/436Zhou, Z., Huang, Q., Li, W., & Deng, W. (2007). A cellular automaton-based simulator for silicon anisotropic etching processes considering high index planes. Journal of Micromechanics and Microengineering, 17(4), S38-S49. doi:10.1088/0960-1317/17/4/s03Gosalvez, M. A., Yan Xing, & Sato, K. (2008). Analytical Solution of the Continuous Cellular Automaton for Anisotropic Etching. Journal of Microelectromechanical Systems, 17(2), 410-431. doi:10.1109/jmems.2008.916339Zhou, Z., Huang, Q., & Li, W. (2009). Modeling and Simulations of Anisotropic Etching of Silicon in Alkaline Solutions with Experimental Verification. Journal of The Electrochemical Society, 156(2), F29. doi:10.1149/1.3031485Rangsten, P., Hedlund, C., Katardjiev, I. V., & Bäcklund, Y. (1998). Etch rates of crystallographic planes inZ-cut quartz - experiments and simulation. Journal of Micromechanics and Microengineering, 8(1), 1-6. doi:10.1088/0960-1317/8/1/001Tellier, C. R., & Leblois, T. G. (2000). Micromachining of quartz plates: determination of a database by combined stereographic analysis and 3-D simulation of etching shapes. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 47(5), 1204-1216. doi:10.1109/58.869067Hedlund, C., Lindberg, U., Bucht, U., & Soderkvist, J. (1993). Anisotropic etching of Z-cut quartz. Journal of Micromechanics and Microengineering, 3(2), 65-73. doi:10.1088/0960-1317/3/2/006Liang, J., Kohsaka, F., Matsuo, T., & Ueda, T. (2007). Wet Etched High Aspect Ratio Microstructures on Quartz for MEMS Applications. IEEJ Transactions on Sensors and Micromachines, 127(7), 337-342. doi:10.1541/ieejsmas.127.337Gosálvez, M. A., Xing, Y., Sato, K., & Nieminen, R. M. (2009). Discrete and continuous cellular automata for the simulation of propagating surfaces. Sensors and Actuators A: Physical, 155(1), 98-112. doi:10.1016/j.sna.2009.08.012Zhenjun Zhu, & Chang Liu. (2000). Micromachining process simulation using a continuous cellular automata method. Journal of Microelectromechanical Systems, 9(2), 252-261. doi:10.1109/84.846706Gosálvez, M. A., Xing, Y., Sato, K., & Nieminen, R. M. (2008). Atomistic methods for the simulation of evolving surfaces. Journal of Micromechanics and Microengineering, 18(5), 055029. doi:10.1088/0960-1317/18/5/055029Ferrando, N., Gosálvez, M. A., Cerdá, J., Gadea, R., & Sato, K. (2011). Octree-based, GPU implementation of a continuous cellular automaton for the simulation of complex, evolving surfaces. Computer Physics Communications, 182(3), 628-640. doi:10.1016/j.cpc.2010.11.004Mühlenbein, H., & Schlierkamp-Voosen, D. (1993). Predictive Models for the Breeder Genetic Algorithm I. Continuous Parameter Optimization. Evolutionary Computation, 1(1), 25-49. doi:10.1162/evco.1993.1.1.25Kohsaka, F., Liang, J., Matsuo, T., & Ueda, T. (2007). High Sensitive Tilt Sensor for Quartz Micromachining. IEEJ Transactions on Sensors and Micromachines, 127(10), 431-436. doi:10.1541/ieejsmas.127.43
A spindle cell carcinoma presenting with osseous metaplasia in the gingiva: a case report with immunohistochemical analysis
<p>Abstract</p> <p>Background</p> <p>Spindle cell carcinoma (SpCC) is a rare, high malignant variant of squamous cell carcinoma (SCC), which shows biphasic proliferation of conventional SCC component and malignant spindle shape cells with sarcomatous appearance.</p> <p>Methods</p> <p>A case of Spindle cell carcinoma with bone-like calcified materials, occurring at the mandibular molar region of 71-years-old Japanese male patient was presented with gross finding, histological findings and MRI image. To identify the characteristics of the bone-like materials, immunohistochemistry were performed.</p> <p>Results</p> <p>Histologically, the cancer cells were composed of spindle cells and epithelial cells which form nests with prominent keratinization. Histological findings showed typical histology of the SpCC, however, as an uncommon finding, spatters of calcified, bone-like materials were observed in between the cancer cells. Immunohistochemistry revealed that cancer cells were positive for cytokeratins and vimentin to a varying degree and negative for Desmin, S-100, Osteopontin, BMP-2 or BMP-4. These findings implied that the calcified materials were formed by metaplasia of the stromal cells.</p> <p>Discussion</p> <p>Bone-like materials formation by osseous and/or cartilaginous metaplasia of the stroma in the carcinoma has been reported. However, the detailed mechanism of these metaplasia and affection on the clinical feature, prognosis and therapies are not well established. In summary, we presented an unique case of SpCC, which has not been described in the literature.</p
A Case of Unerupted Lower Primary Second Molar Associated with Compound Odontoma
Odontoma is the most common type of benign odontogenic tumor, and often causes disturbances in the eruption of its associated tooth. Odontomas usually occur in the permanent dentition, and rarely occur solely in the primary dentition. This case report documents a six-year-old-child with a compound odontoma located in the mandible, which caused the impaction of the primary second molar
The role of CCN2 in cartilage and bone development
CCN2, a classical member of the CCN family of matricellular proteins, is a key molecule that conducts cartilage development in a harmonized manner through novel molecular actions. During vertebrate development, all cartilage is primarily formed by a process of mesenchymal condensation, while CCN2 is induced to promote this process. Afterwards, cartilage develops into several subtypes with different fates and missions, in which CCN2 plays its proper roles according to the corresponding microenvironments. The history of CCN2 in cartilage and bone began with its re-discovery in the growth cartilage in long bones, which determines the skeletal size through the process of endochondral ossification. CCN2 promotes physiological developmental processes not only in the growth cartilage but also in the other types of cartilages, i.e., Meckel’s cartilage representing temporary cartilage without autocalcification, articular cartilage representing hyaline cartilage with physical stiffness, and auricular cartilage representing elastic cartilage. Together with its significant role in intramembranous ossification, CCN2 is regarded as a conductor of skeletogenesis. During cartilage development, the CCN2 gene is dynamically regulated to yield stage-specific production of CCN2 proteins at both transcriptional and post-transcriptional levels. New functional aspects of known biomolecules have been uncovered during the course of investigating these regulatory systems in chondrocytes. Since CCN2 promotes integrated regeneration as well as generation (=development) of these tissues, its utility in regenerative therapy targeting chondrocytes and osteoblasts is indicated, as has already been supported by experimental evidence obtained in vivo
Mdm20 Stimulates PolyQ Aggregation via Inhibiting Autophagy Through Akt-Ser473 Phosphorylation
Mdm20 is an auxiliary subunit of the NatB complex, which includes Nat5, the catalytic subunit for protein N-terminal acetylation. The NatB complex catalyzes N-acetylation during de novo protein synthesis initiation; however, recent evidence from yeast suggests that NatB also affects post-translational modification of tropomyosin, which is involved in intracellular sorting of aggregated proteins. We hypothesized that an acetylation complex such as NatB may contribute to protein clearance and/or proteostasis in mammalian cells. Using a poly glutamine (polyQ) aggregation system, we examined whether the NatB complex or its components affect protein aggregation in rat primary cultured hippocampal neurons and HEK293 cells. The number of polyQ aggregates increased in Mdm20 over-expressing (OE) cells, but not in Nat5-OE cells. Conversely, in Mdm20 knockdown (KD) cells, but not in Nat5-KD cells, polyQ aggregation was significantly reduced. Although Mdm20 directly associates with Nat5, the overall cellular localization of the two proteins was slightly distinct, and Mdm20 apparently co-localized with the polyQ aggregates. Furthermore, in Mdm20-KD cells, a punctate appearance of LC3 was evident, suggesting the induction of autophagy. Consistent with this notion, phosphorylation of Akt, most notably at Ser473, was greatly reduced in Mdm20-KD cells. These results demonstrate that Mdm20, the so-called auxiliary subunit of the translation-coupled protein N-acetylation complex, contributes to protein clearance and/or aggregate formation by affecting the phosphorylation level of Akt indepenently from the function of Nat5
The RNA-binding protein Rbm38 is dispensable during pressure overload-induced cardiac remodeling in mice
The importance of tightly controlled alternative pre-mRNA splicing in the heart is emerging. The RNA binding protein Rbm24 has recently been identified as a pivotal cardiac splice factor, which governs sarcomerogenesis in the heart by controlling the expression of alternative protein isoforms. Rbm38, a homolog of Rbm24, has also been implicated in RNA processes such as RNA splicing, RNA stability and RNA translation, but its function in the heart is currently unknown. Here, we investigated the role of Rbm38 in the healthy and diseased adult mouse heart. In contrast to the heart- and skeletal muscle-enriched protein Rbm24, Rbm38 appears to be more broadly expressed. We generated somatic Rbm38 -/- mice and show that global loss of Rbm38 results in hematopoietic defects. Specifically, Rbm38 -/- mice were anemic and displayed enlarged spleens with extramedullary hematopoiesis, as has been shown earlier. The hearts of Rbm38 -/- mice were mildly hypertrophic, but cardiac function was not affected. Furthermore, Rbm38 deficiency did not affect cardiac remodeling (i.e. hypertrophy, LV dilation and fibrosis) or performance (i.e. fractional shortening) after pressure-overload induced by transverse aorta constriction. To further investigate molecular consequences of Rbm38 deficiency, we examined previously identified RNA stability, splicing, and translational targets of Rbm38. We found that stability targets p21 and HuR, splicing targets Mef2d and Fgfr2, and translation target p53 were not altered, suggesting that these Rbm38 targets are tissue-specific or that Rbm38 deficiency may be counteracted by a redundancy mechanism. In this regard, we found a trend towards increased Rbm24 protein expression in Rbm38 -/- hearts. Overall, we conclude that Rbm38 is critical in hematopoiesis, but does not play a critical role in the healthy and diseased heart
- …