Some technological properties of phenotypically identified enterococci strains isolated from Turkish tulum cheese

In this study, a total of 39 enterococci strains were isolated and identified as 17 Enterococcus faecium (43.58%), 11 Enterococcus faecalis (28.21%) and 11 Enterococcus durans (28.21%) strains from 28 Tulum cheese samples from Isparta, Turkey. Three E. faecium (EYT6, EYT21 and EYT34) and 1 E. durans (EYT16) strains showed -hemolytic activity on Sheep Blood Agar. None of the all strains exhibited -hemolysis. All of the 39 enterococci strains were sensitive to vancomycin (30 g vancomycin per disk, inhibition zone > 12 mm). Three E. faecium (EYT17, EYT31 and EYT39) and 1 E. durans (EYT19) strains were found as bacteriocin producer. E. faecium strains showed higher acidifying ability than E. faecalis and E. durans strains. The highest proteolytic activity value (100.5 g tyrosine/ml) was obtained from E. faecalis EYT18. Proteolytic activity results showed that E. faecalis strains generally more active than E. faecium and E. durans strains. E. faecalis strains were found the most lipolytic, followed by the E. faecium and E. durans strains and E. faecalis EYT7 strain gave the maximum halo radius (0.53 mm). None of the 39 enterococci strains decarboxylated histidine, lysine or ornithine. However, 36 of the 39 strains (92.31%) produced tyramine from tyrosine

On micro-structural effects in dielectric mixtures

The paper presents numerical simulations performed on dielectric properties of two-dimensional binary composites on eleven regular space filling tessellations. First, significant contributions of different parameters, which play an important role in the electrical properties of the composite, are introduced both for designing and analyzing material mixtures. Later, influence of structural differences and intrinsic electrical properties of constituents on the composite's over all electrical properties are investigated. The structural differences are resolved by the spectral density representation approach. The numerical technique, without any {\em a-priori} assumptions, for extracting the spectral density function is also presented.Comment: 24 pages, 8 figure and 7 tables. It is submitted to IEEE Transactions on Dielectrics and Electrical Insulatio

Ectopic splenic tissue in the testis: a case report

Splenogonadal fusion is a rare congenital anomaly that has been encountered in all age groups. It is defined as an abnormal connection between spleen and gonad or mesonephros derivatives. We report a case of splenogonadal fusion which was diagnosed incidentally in a 38-year-old man with a history of infertility. This rare entity should be considered in the differential diagnosis of testicular masses.Key Words: Splenogonadal fusion, testicular mass

Microwave absorption and radiation from large-area multilayer CVD graphene

Here we experimentally study the microwave absorption and near-field radiation behaviour of monolayer and few-layer, large-area CVD graphene in the C and X bands. Artificial stacking of CVD graphene reduces the sheet resistance, as verified by non-contact microwave cavity measurements and four-probe DC resistivity. The proposed multilayer stacked graphene exhibits increased absorption determined by the total sheet resistance. The underlying mechanism could enable us to apply nanoscale graphene sheets as optically transparent radar absorbers. Near-field radiation measurements show that our present few-layer graphene patches with sheet resistance more than 600 /sq exhibit no distinctive microwave resonance and radiate less electromagnetic power with increasing layers; however, our theoretical prediction suggests that for samples to be significant as microwave antennas, doped multilayer graphene with sheet resistance less than 10 /sq is required.This work was funded by the Graphene Research Centre, University of Cambridge, and the Engineering and Physical Sciences Research Council (EPSRC), UK under a Program Grant (EP/K01711X/1). M.T.C thanks the Winston Churchill Trust and the International Young Scientist Research Fellowship, National Natural Science Foundation of China, for generous financial support. B.W. acknowledges the fund support from the China Scholarship Council and National Natural Science Foundation of China No. 61271017.This is the FINAL published version, also available on the publisher's website at: http://www.sciencedirect.com/science/article/pii/S000862231400540

Self-Adaptive Decentralized Monitoring in Software-Defined Networks

The Software-Defined Networking (SDN) paradigm can allow network management solutions to automatically and frequently reconfigure network resources. When developing SDNbased management architectures, it is of paramount importance to design a monitoring system that can provide timely and consistent updates to heterogeneous management applications. To support such applications operating with low latency requirements, the monitoring system should scale with increasing network size and provide precise network views with minimum overhead on the available resources. In this paper we present a novel, self-adaptive, decentralized framework for resource monitoring in SDN. Our framework enables accurate statistics to be collected with limited burden on the network resources. This is realized through a self-tuning, adaptive monitoring mechanism that automatically adjusts its settings based on the traffic dynamics. We evaluate our proposal based on a realistic use case scenario, where a content distribution service and an on-demand gaming platform are deployed within an ISP network. The results show that reduced monitoring latencies are obtained with the proposed framework, thus enabling shorter reconfiguration control loops. In addition, the proposed adaptive monitoring method achieves significant gain in terms of monitoring overhead, while preserving the performance of the services considered

Corrosion behaviour of porous Ti intended for biomedical applications

Porous Ti implants are being developed inorder to reduce the biomechanical mismatch between theimplant and the bone, as well as increasing the osseointegrationby improving the bone in-growth. Most of the focusin the literature has been on the structural, biological andmechanical characterization of porous Ti whereas there islimited information on the electrochemical characterization.Therefore, the present work aims to study the corrosionbehaviour of porous Ti having 30 and 50 % ofnominal porosity, produced by powder metallurgy routeusing the space holder technique. The percentage, size anddistribution of the pores were determined by image analysis.Electrochemical tests consisting of potentiodynamicpolarization and electrochemical impedance spectroscopywere performed in 9 g/L NaCl solution at body temperature.Electrochemical studies revealed that samples presenteda less stable oxide film at increased porosity, morespecifically, the complex geometry and the interconnectivityof the pores resulted in formation of less protectiveoxide film in the pores.This study was supported by FCT with the reference project UID/EEA/04436/2013, by FEDER funds through the COMPETE 2020 – Programa Operacional Competitividade e Internacionalizac¸a˜o (POCI) with the reference project POCI-01-0145- FEDER-006941, Programa de Acc¸o˜es Universita´rias Integradas LusoFrancesas’ (PAUILF TC-12_14), and The Calouste Gulbenkian Foundation through ‘‘Programa de Mobilidade Acade´mica para Professores’’. The authors would also like to acknowledge Prof. Ana Senos (University of Aveiro) and Prof. Jose´ Carlos Teixeira (University of Minho) for the provision of the characterization facilities.info:eu-repo/semantics/publishedVersio

A three-dimensional comparison of a morphometric and conventional cephalometric midsagittal planes for craniofacial asymmetry

Morphometric methods are used in biology to study object symmetry in living organisms and to determine the true plane of symmetry. The aim of this study was to determine if there are clinical differences between three-dimensional (3D) cephalometric midsagittal planes used to describe craniofacial asymmetry and a true symmetry plane derived from a morphometric method based on visible facial features. The sample consisted of 14 dry skulls (9 symmetric and 5 asymmetric) with metallic markers which were imaged with cone-beam computed tomography. An error study and statistical analysis were performed to validate the morphometric method. The morphometric and conventional cephalometric planes were constructed and compared. The 3D cephalometric planes constructed as perpendiculars to the Frankfort horizontal plane resembled the morphometric plane the most in both the symmetric and asymmetric groups with mean differences of less than 1.00 mm for most variables. However, the standard deviations were often large and clinically significant for these variables. There were clinically relevant differences (>1.00 mm) between the different 3D cephalometric midsagittal planes and the true plane of symmetry determined by the visible facial features. The difference between 3D cephalometric midsagittal planes and the true plane of symmetry determined by the visible facial features were clinically relevant. Care has to be taken using cephalometric midsagittal planes for diagnosis and treatment planning of craniofacial asymmetry as they might differ from the true plane of symmetry as determined by morphometrics

Frontal Bone Remodeling for Gender Reassignment of the Male Forehead: A Gender-Reassignment Surgery

Gender-reassignment therapy, especially for reshaping of the forehead, can be an effective treatment to improve self-esteem. Contouring of the cranial vault, especially of the forehead, still is a rarely performed surgical procedure for gender reassignment. In addition to surgical bone remodeling, several materials have been used for remodeling and refinement of the frontal bone. But due to shortcomings of autogenous bone material and the disadvantages of polyethylene or methylmethacrylate, hydroxyapatite cement (HAC) composed of tetracalcium phosphate and dicalcium phosphate seems to be an alternative. This study aimed to analyze the clinical outcome after frontal bone remodeling with HAC for gender male-to-female reassignment. The 21 patients in the study were treated for gender reassignment of the male frontal bone using HAC. The average age of these patients was 33.4 years (range, 21–42 years). The average volume of HAC used per patient was 3.83 g. The authors’ clinical series demonstrated a satisfactory result. The surgery was easy to perform, and HAC was easy to apply and shape to suit individual needs. Overall satisfaction was very high. Therefore, HAC is a welcome alternative to the traditional use of autogenous bone graft for correction of cranial vault irregularities