A new concept for high-cycle-life LEO: Rechargeable MnO2-hydrogen

The nickel-hydrogen secondary battery system is now the one of choice for use in GEO satellites. It offers superior energy density to that of nickel-cadmium, with a lifetime that is at least comparable in terms of both cycle life and overall operating life. While the number of deep cycles required for GEO use is small, LEO satellites with long lifetimes (5 to 10 years) will require secondary battery systems allowing 30,000 to 60,000 useful cycles which are characterized by an approximately 2C charge rate and C average discharge rate. Recent work has shown that birnessite MnO2 doped with bismuth oxide can be cycled at very high rates (6C) over a very large number of cycles (thousands) at depths-of-discharge in the 85 to 90 percent range, based on two electrons, which discharge at the same potential in a flat plateau. The potential is about 0.7 V vs. hydrogen, with a cut-off at 0.6 V. At first sight, this low voltage would seem to be a disadvantage, since the theoretical energy density will be low. However, it permits the use of lightweight materials that are immune from corrosion at the positive. The high utilization and low equivalent weight of the active material, together with the use of teflon-bonded graphite for current collection, result in very light positives, especially when these are compared with those in a derated nickel-hydrogen system. In addition, the weight of the pressure vessel falls somewhat, since the dead volume is lower. Calculations show that a total system will have 2.5 times the Ah capacity of a derated nickel-hydrogen LEO battery, so that the energy density, based on 1.2 V for nickel-hydrogen and 0.7 V for MnO2-hydrogen, will be 45 percent higher for comparable cycling performance

Partial pulmonary embolization disrupts alveolarization in fetal sheep

BACKGROUND: Although bronchopulmonary dysplasia is closely associated with an arrest of alveolar development and pulmonary capillary dysplasia, it is unknown whether these two features are causally related. To investigate the relationship between pulmonary capillaries and alveolar formation, we partially embolized the pulmonary capillary bed. METHODS: Partial pulmonary embolization (PPE) was induced in chronically catheterized fetal sheep by injection of microspheres into the left pulmonary artery for 1 day (1d PPE; 115d gestational age; GA) or 5 days (5d PPE; 110-115d GA). Control fetuses received vehicle injections. Lung morphology, secondary septal crests, elastin, collagen, myofibroblast, PECAM1 and HIF1 alpha abundance and localization were determined histologically. VEGF-A, Flk-1, PDGF-A and PDGF-R alpha mRNA levels were measured using real-time PCR. RESULTS: At 130d GA (term approximately 147d), in embolized regions of the lung the percentage of lung occupied by tissue was increased from 29 +/- 1% in controls to 35 +/- 1% in 1d PPE and 44 +/- 1% in 5d PPE fetuses (p < 0.001). Secondary septal crest density was reduced from 8 +/- 0% in controls to 5 +/- 0% in 1d PPE and 4 +/- 0% in 5d PPE fetuses (p < 0.05), indicating impaired alveolar formation. The deposition of differentiated myofibroblasts (23 +/- 1% vs 28 +/- 1%; p < 0.001) and elastin fibres (3 +/- 0% vs 4 +/- 0%; p < 0.05) were also impaired in embolized lung regions of PPE fetuses compared to controls. PPE did not alter the deposition of collagen or PECAM1. At 116d GA in 5d PPE fetuses, markers of hypoxia indicated that a small and transient hypoxic event had occurred (hypoxia in 6.7 +/- 1.4% of the tissue within embolized regions of 5d PPE fetuses at 116d compared to 0.8 +/- 0.2% of tissue in control regions). There was no change in the proportion of tissue labelled with HIF1 alpha. There was no change in mRNA levels of the angiogenic factors VEGF and Flk-1, although a small increase in PDGF-R alpha expression at 116d GA, from 1.00 +/- 0.12 in control fetuses to 1.61 +/- 0.18 in 5d PPE fetuses may account for impaired differentiation of alveolar myofibroblasts and alveolar development. CONCLUSIONS: PPE impairs alveolarization without adverse systemic effects and is a novel model for investigating the role of pulmonary capillaries and alveolar myofibroblasts in alveolar formation

Postoperative outcomes in oesophagectomy with trainee involvement

BACKGROUND: The complexity of oesophageal surgery and the significant risk of morbidity necessitates that oesophagectomy is predominantly performed by a consultant surgeon, or a senior trainee under their supervision. The aim of this study was to determine the impact of trainee involvement in oesophagectomy on postoperative outcomes in an international multicentre setting. METHODS: Data from the multicentre Oesophago-Gastric Anastomosis Study Group (OGAA) cohort study were analysed, which comprised prospectively collected data from patients undergoing oesophagectomy for oesophageal cancer between April 2018 and December 2018. Procedures were grouped by the level of trainee involvement, and univariable and multivariable analyses were performed to compare patient outcomes across groups. RESULTS: Of 2232 oesophagectomies from 137 centres in 41 countries, trainees were involved in 29.1 per cent of them (n = 650), performing only the abdominal phase in 230, only the chest and/or neck phases in 130, and all phases in 315 procedures. For procedures with a chest anastomosis, those with trainee involvement had similar 90-day mortality, complication and reoperation rates to consultant-performed oesophagectomies (P = 0.451, P = 0.318, and P = 0.382, respectively), while anastomotic leak rates were significantly lower in the trainee groups (P = 0.030). Procedures with a neck anastomosis had equivalent complication, anastomotic leak, and reoperation rates (P = 0.150, P = 0.430, and P = 0.632, respectively) in trainee-involved versus consultant-performed oesophagectomies, with significantly lower 90-day mortality in the trainee groups (P = 0.005). CONCLUSION: Trainee involvement was not found to be associated with significantly inferior postoperative outcomes for selected patients undergoing oesophagectomy. The results support continued supervised trainee involvement in oesophageal cancer surgery

Complexity reduction for frequency-response masking filters using cyclotomic polynomial prefilters

Proceedings - IEEE International Symposium on Circuits and Systems3297-3300PICS

Interneuron development is disrupted in preterm brains with diffuse white matter injury: Observations in mouse and human

Preterm brain injury, occurring in approximately 30% of infants born &lt;32 weeks gestational age, is associated with an increased risk of neurodevelopmental disorders, such as autism spectrum disorder (ASD) and attention deficit hyperactivity disorder (ADHD). The mechanism of gray matter injury in preterm born children is unclear and likely to be multifactorial; however, inflammation, a high predictor of poor outcome in preterm infants, has been associated with disrupted interneuron maturation in a number of animal models. Interneurons are important for regulating normal brain development, and disruption in interneuron development, and the downstream effects of this, has been implicated in the etiology of neurodevelopmental disorders. Here, we utilize postmortem tissue from human preterm cases with or without diffuse white matter injury (WMI; PMA range: 23(+2) to 28(+1) for non-WMI group, 26(+6) to 30(+0) for WMI group, p = 0.002) and a model of inflammation-induced preterm diffuse white matter injury (i.p. IL-1 beta, b.d., 10 mu g/kg/injection in male CD1 mice from P1-5). Data from human preterm infants show deficits in interneuron numbers in the cortex and delayed growth of neuronal arbors at this early stage of development. In the mouse, significant reduction in the number of parvalbumin-positive interneurons was observed from postnatal day (P) 10. This decrease in parvalbumin neuron number was largely rectified by P40, though there was a significantly smaller number of parvalbumin positive cells associated with perineuronal nets in the upper cortical layers. Together, these data suggest that inflammation in the preterm brain may be a contributor to injury of specific interneuron in the cortical gray matter. This may represent a potential target for postnatal therapy to reduce the incidence and/or severity of neurodevelopmental disorders in preterm infants

Challenges and potential of palm-based biomass and palm oil mill effluent for the production of sustainable power and value-added products

© 2018 by Nova Science Publishers, Inc. All rights reserved. With the increasing volume of global palm oil production, utilization of palm-based biomass is gaining significant attention as there are huge opportunities and potentials to convert the biomass into bioenergy and value-added products. Palm-based biomass which includes empty fruit bunches (EFB), palm kernel shell (PKS), palm mesocarp fiber (PMF), etc. are generated at a rate of about 80 Mt (dry weight basis, dwb) per year in Malaysia. Besides, in the palm oil milling facility, a large amount of liquid effluent known as palm oil mill effluent (POME) is generated during the process of extraction of crude palm oil from fresh fruit bunches. The vast volume of the biomass and liquid effluent, as well as their qualities, poses challenges to palm oil processing facilities to meet the disposal and discharge standards imposed by local authorities. This chapter identifies the challenges and potential of palm-based biomass and POME for the production of sustainable power and value-added products. Two sectors of power generation through biogas and biomass are discussed. In addition, the potential of palm-based biomasses for value-added products generation is also identified. Various treatment technologies have been developed and implemented in palm oil mills over the past decades to treat palm biomass wastes and convert them into bioenergy and value-added products. A novel system - Integrated Waste Recovery and Regeneration (REGEN) system which integrates several treatment technologies as a whole system is capable of converting all the solid and liquid biomasses in the palm oil mill into valuable products. REGEN system is self-sustaining since it generates power to support the operation of the palm oil mill and other downstream activities/equipment embraced in the system. This integrated system is capable of transforming the palm oil industry into a greener industry and drives the palm oil mill into a zero waste processing facility