200 research outputs found
Microhoneycomb monoliths prepared by the unidirectional freeze-drying of cellulose nanofiber based sols: Method and extensions
© 2018 Journal of Visualized Experiments. Monolithic honeycomb structures have been attractive to multidisciplinary fields due to their high strength-to-weight ratio. Particularly, microhoneycomb monoliths (MHMs) with micrometer-scale channels are expected as efficient platforms for reactions and separations because of their large surface areas. Up to now, MHMs have been prepared by a unidirectional freeze-drying (UDF) method only from very limited precursors. Herein, we report a protocol from which a series of MHMs consisting of different components can be obtained. Recently, we found that cellulose nanofibers function as a distinct structure-directing agent towards the formation of MHMs through the UDF process. By mixing the cellulose nanofibers with water soluble substances which do not yield MHMs, a variety of composite MHMs can be prepared. This significantly enriches the chemical constitution of MHMs towards versatile applications
Local Ferromagnetism in Microporous Carbon with the Structural Regularity of Zeolite Y
Magnetization M(H,T) measurements have been performed on microporous carbon
(MC) with a three-dimensional nano-array structure corresponding to that of a
zeolite Y supercage. The obtained results unambiguously demonstrate the
occurrence of high-temperature ferromagnetism in MC, probably originating from
a topological disorder associated with curved graphene sheets. The results
provide evidence that the ferromagnetic behavior of MC is governed by isolated
clusters in a broad temperature range, and suggest the occurrence of
percolative-type transition with the temperature lowering. A comparative
analysis of the results obtained on MC and related materials is given.Comment: To be published in Physical Review B (2003
Modification of alumina matrices through chemical etching and electroless deposition of nano-Au array for amperometric sensing
Simple nanoporous alumina matrix modification procedure, in which the electrically highly insulating alumina barrier layer at the bottom of the pores is replaced with the conductive layer of the gold beds, was described. This modification makes possible the direct electron exchange between the underlying aluminum support and the redox species encapsulated in the alumina pores, thus, providing the generic platform for the nanoporous alumina sensors (biosensors) with the direct amperometric signal readout fabrication
Preparation and characterization of superhydrophobic surfaces based on hexamethyldisilazane-modified nanoporous alumina
Superhydrophobic nanoporous anodic aluminum oxide (alumina) surfaces were prepared using treatment with vapor-phase hexamethyldisilazane (HMDS). Nanoporous alumina substrates were first made using a two-step anodization process. Subsequently, a repeated modification procedure was employed for efficient incorporation of the terminal methyl groups of HMDS to the alumina surface. Morphology of the surfaces was characterized by scanning electron microscopy, showing hexagonally ordered circular nanopores with approximately 250 nm in diameter and 300 nm of interpore distances. Fourier transform infrared spectroscopy-attenuated total reflectance analysis showed the presence of chemically bound methyl groups on the HMDS-modified nanoporous alumina surfaces. Wetting properties of these surfaces were characterized by measurements of the water contact angle which was found to reach 153.2 ± 2°. The contact angle values on HMDS-modified nanoporous alumina surfaces were found to be significantly larger than the average water contact angle of 82.9 ± 3° on smooth thin film alumina surfaces that underwent the same HMDS modification steps. The difference between the two cases was explained by the Cassie-Baxter theory of rough surface wetting
Capacitive energy storage from -50 to 100 °C using an ionic liquid electrolyte
Relying on redox reactions, most batteries are limited in their ability to operate at very low or very high temperatures. While performance of electrochemical capacitors is less dependent on the temperature, present-day devices still cannot cover the entire range needed for automotive and electronics applications under a variety of environmental conditions. We show that the right combination of the exohedral nanostructured carbon (nanotubes and onions) electrode and a eutectic mixture of ionic liquids can dramatically extend the temperature range of electrical energy storage, thus defying the conventional wisdom that ionic liquids can only be used as electrolytes above room temperature. We demonstrate electrical double layer capacitors able to operate from -50 to 100 °C over a wide voltage window (up to 3.7 V) and at very high charge/discharge rates of up to 20 V/s
Properties of superhard phase of single wall carbon nanotube in comparison with fullerite C60 and diamond
Diffusionsgewichtete Bildgebung zur Überwachung der Reaktion von malignen Gliomen auf die photodynamische Therapie
Size-Dependent Filling Behavior of UV-Curable Di(meth)acrylate Resins into Carbon-Coated Anodic Aluminum Oxide Pores of around 20 nm
- …