23 research outputs found

    Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

    Get PDF
    Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat

    Nondestructive measurement of conformal coating thickness on printed circuit board with ultra-high resolution optical coherence tomography

    No full text
    Conformal coating (CC) is widely used to protect printed circuit board from corrosion, mold growth, and electrical failures. To ensure effective protection, the thickness of the CC layer needs to be well controlled. However, to date, the coating thickness is usually measured in a destructive way under microscopes. In this paper, we proposed to use optical coherence tomography (OCT) to measure the CC thickness nondestructively. Specifically, to obtain a good accuracy in thickness measurement, we constructed a spectral domain OCT with the ultra-high axial resolution to image the CC layer in three dimensions and developed an image segmentation algorithm to detect the CC layer from the OCT images. Finally, we evaluated the effectiveness of the proposed method by comparing it with the conventional method, and the results demonstrate that the measurement by our method is consistent with that by the microscope. This also indicates that OCT with high axial resolution can potentially be used to measure the CC thickness accurately and nondestructively.NRF (Natl Research Foundation, S’pore)ASTAR (Agency for Sci., Tech. and Research, S’pore)MOE (Min. of Education, S’pore)NMRC (Natl Medical Research Council, S’pore)Published versio

    Short-term wind power prediction based on GPR-BSO model

    No full text
    Wind power forecasting is a crucial part for the safe and stable operation of wind power integration, which is under the influence of different factors such as wind speed, wind direction, atmospheric pressure. These factors bring randomness and volatility to wind power which makes it less predictable. While, there are very limited studies on describing the uncertainty of wind power. Therefore, to providing additional information on the uncertainty and volatility, a kernel-based on Gaussian Process Regression (GPR) incorporating the hyper-parameters intelligent optimization method is proposed in this paper. Firstly, the hyper-parameters solution of GPR is formulated as a nonlinear optimization with constraints. Then, an intelligent algorithm named Brain-storming optimization (BSO) is adopted to obtain the optimal hyper-parameters of GPR. Furthermore, the performance is examined on short-term wind power data. Most importantly, the GPR incorporating BSO can avoid the hyper-parameters at local optimum

    Fig. 4.

    No full text

    Water-blocking Asphyxia of N95 Medical Respirator During Hot Environment Work Tasks With Whole-body Enclosed Anti-bioaerosol Suit

    No full text
    Background: During hot environment work tasks with whole-body enclosed anti-bioaerosol suit, the combined effect of heavy sweating and exhaled hot humid air may cause the N95 medical respirator to saturate with water/sweat (i.e., water-blocking). Methods: 32 young male subjects with different body mass indexes (BMI) in whole-body protection (N95 medical respirator + one-piece protective suit + head covering + protective face screen + gloves + shoe covers) were asked to simulate waste collecting from each isolated room in a seven-story building at 27-28°C, and the weight, inhalation resistance (Rf), and aerosol penetration of the respirator before worn and after water-blocking were analyzed. Results: All subjects reported water-blocking asphyxia of the N95 respirators within 36-67 min of the task. When water-blocking occurred, the Rf and 10-200 nm total aerosol penetration (Pt) of the respirators reached up to 1270-1810 Pa and 17.3-23.3%, respectively, which were 10 and 8 times of that before wearing. The most penetration particle size of the respirators increased from 49-65 nm before worn to 115-154 nm under water-blocking condition, and the corresponding maximum size-dependent aerosol penetration increased from 2.5-3.5% to 20-27%. With the increase of BMI, the water-blocking occurrence time firstly increased then reduced, while the Rf, Pt, and absorbed water all increased significantly. Conclusions: This study reveals respirator water-blocking and its serious negative impacts on respiratory protection. When performing moderate-to-high-load tasks with whole-body protection in a hot environment, it is recommended that respirator be replaced with a new one at least every hour to avoid water-blocking asphyxia
    corecore