A modeling investigation of canopy-air oxygen isotopic exchange of water vapor and carbon dioxide in a soybean field

The oxygen isotopes of CO2 and H2O ( 18O-CO2 and 18O-H2O) provide unique information regarding the contribution of terrestrial vegetation to the global CO2 and H2O cycles. In this paper, a simple isotopic land surface model was used to investigate processes controlling the isotopic exchange of 18O-H2O and 18O-CO2 between a soybean ecosystem and the atmosphere. We included in a standard land surface model a nonsteady state theory of leaf water isotopic composition, a canopy kinetic fractionation factor, and a big-leaf parameterization of the 18O-CO2 isoforcing on the atmosphere. Our model simulations showed that the Pclet effect was less important than the nonsteady state effect on the temporal dynamics of the water isotopic exchange. The model reproduced the highly significant and negative correlation between relative humidity and the ecosystem-scale 18O-CO2 isoforcing measured with eddy covariance. But the model-predicted isoforcing was biased high in comparison to the observations. Model sensitivity analysis suggested that the CO2 hydration efficiency must have been much lower in the leaves of soybean in field conditions than previously reported. Understanding environmental controls on the hydration efficiency and the scaling from the leaf to the canopy represents an area in need of more research. Copyright 2010 by the American Geophysical Union

Ferromagnetic resonance of patterned chromium dioxide thin films grown by selective area chemical vapour deposition

This is the final version of the article. Available from the American Institute of Physics via the DOI in this record.A selective area chemical vapour deposition technique has been used to fabricate continuous and patterned epitaxial CrO2 thin films on (100)-oriented TiO2 substrates. Precessional magnetization dynamics were stimulated both electrically and optically, and probed by means of time-resolved Kerr microscopy and vector network analyser ferromagnetic resonance techniques. The dependence of the precession frequency and the effective damping parameter upon the static applied magnetic field were investigated. All films exhibited a large in-plane uniaxial anisotropy. The effective damping parameter was found to exhibit strong field dependence in the vicinity of the hard axis saturation field. However, continuous and patterned films were found to possess generally similar dynamic properties, confirming the suitability of the deposition technique for fabrication of future spintronic devices

Regulation of Neuronal Cell Death by c-Abl-Hippo/MST2 Signaling Pathway

BACKGROUND: Mammalian Ste20-like kinases (MSTs) are the mammalian homologue of Drosophila hippo and play critical roles in regulation of cell death, organ size control, proliferation and tumorigenesis. MSTs exert pro-apoptotic function through cleavage, autophosphorylation and in turn phosphorylation of downstream targets, such as Histone H2B and FOXO (Forkhead box O). Previously we reported that protein kinase c-Abl mediates oxidative stress-induced neuronal cell death through phosphorylating MST1 at Y433, which is not conserved among mammalian MST2, Drosophila Hippo and C.elegans cst-1/2. METHODOLOGY/PRINCIPAL FINDINGS: Using immunoblotting, in vitro kinase and cell death assay, we demonstrate that c-Abl kinase phosphorylates MST2 at an evolutionarily conserved site, Y81, within the kinase domain. We further show that the phosphorylation of MST2 by c-Abl leads to the disruption of the interaction with Raf-1 proteins and the enhancement of homodimerization of MST2 proteins. It thereby enhances the MST2 activation and induces neuronal cell death. CONCLUSIONS/SIGNIFICANCE: The identification of the c-Abl tyrosine kinase as a novel upstream activator of MST2 suggests that the conserved c-Abl-MST signaling cascade plays an important role in oxidative stress-induced neuronal cell death

Atomic segregation at twin boundaries in a Mg-Ag alloy

Segregation of solute atoms at twin boundaries (TBs) plays a critical role in mechanical properties and thermal stability of magnesium alloys. Here, segregation structures at {10 (1) over bar1}, {10 (1) over bar2} and {10 (1) over bar3} TBs are characterized in a Mg-Ag alloy by means of the atomic resolution high-angle annular dark-field technique based on scanning transmission electron microscopy. Of particular finding is the unique complex segregation at {10 (1) over bar3} TBs, where Ag atoms occupy both substitutional and interstitial sites. By contrast, Ag atoms only substitutionally segregate at {10 (1) over bar1} and {10 (1) over bar2} TBs. Calculation simulation of segregation energy and three-dimensional structure of TBs helps understanding of hybrid segregation. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved

Multiple Levels of Synergistic Collaboration in Termite Lignocellulose Digestion

In addition to evolving eusocial lifestyles, two equally fascinating aspects of termite biology are their mutualistic relationships with gut symbionts and their use of lignocellulose as a primary nutrition source. Termites are also considered excellent model systems for studying the production of bioethanol and renewable bioenergy from 2nd generation (non-food) feedstocks. While the idea that gut symbionts are the sole contributors to termite lignocellulose digestion has remained popular and compelling, in recent years host contributions to the digestion process have become increasingly apparent. However, the degree to which host and symbiont, and host enzymes, collaborate in lignocellulose digestion remain poorly understood. Also, how digestive enzymes specifically collaborate (i.e., in additive or synergistic ways) is largely unknown. In the present study we undertook translational-genomic studies to gain unprecedented insights into digestion by the lower termite Reticulitermes flavipes and its symbiotic gut flora. We used a combination of native gut tissue preparations and recombinant enzymes derived from the host gut transcriptome to identify synergistic collaborations between host and symbiont, and also among enzymes produced exclusively by the host termite. Our findings provide important new evidence of synergistic collaboration among enzymes in the release of fermentable monosaccharides from wood lignocellulose. These monosaccharides (glucose and pentoses) are highly relevant to 2nd-generation bioethanol production. We also show that, although significant digestion capabilities occur in host termite tissues, catalytic tradeoffs exist that apparently favor mutualism with symbiotic lignocellulose-digesting microbes. These findings contribute important new insights towards the development of termite-derived biofuel processing biotechnologies and shed new light on selective forces that likely favored symbiosis and, subsequently, group living in primitive termites and their cockroach ancestors

Isoforms of U1-70k control subunit dynamics in the human spliceosomal U1 snRNP

Most human protein-encoding genes contain multiple exons that are spliced together, frequently in alternative arrangements, by the spliceosome. It is established that U1 snRNP is an essential component of the spliceosome, in human consisting of RNA and ten proteins, several of which are post- translationally modified and exist as multiple isoforms. Unresolved and challenging to investigate are the effects of these post translational modifications on the dynamics, interactions and stability of the particle. Using mass spectrometry we investigate the composition and dynamics of the native human U1 snRNP and compare native and recombinant complexes to isolate the effects of various subunits and isoforms on the overall stability. Our data reveal differential incorporation of four protein isoforms and dynamic interactions of subunits U1-A, U1-C and Sm-B/B’. Results also show that unstructured post- ranslationally modified C-terminal tails are responsible for the dynamics of Sm-B/B’ and U1-C and that their interactions with the Sm core are controlled by binding to different U1-70k isoforms and their phosphorylation status in vivo. These results therefore provide the important functional link between proteomics and structure as well as insight into the dynamic quaternary structure of the native U1 snRNP important for its function.This work was funded by: BBSRC (OVM), BBSRC and EPSRC (HH and NM), EU Prospects (HH), European Science Foundation (NM), the Royal Society (CVR), and fellowship from JSPS and HFSP (YM and DAPK respectively)

Building generic anatomical models using virtual model cutting and iterative registration

Article deposited according to publisher policy posted on SHERPA/RoMEO, 30/07/2010.YesFunding provided by the Open Access Authors Fund

Elastic response of cross-laminated engineered bamboo panels subjected to in-plane loading

© ICE Publishing: All rights reserved. Novel cross-laminated bamboo panels comprising three and five layers (G-XLam3 and G-XLam5) were tested in compression along the main (0°) and the transverse (90°) directions. Linear variable differential transformer (LVDT) and non-contact three-dimensional digital image correlation (DIC) measuring techniques were used separately to measure deformation in the elastic region, and the elastic moduli, Ep C,0 and Ep C,90, were derived. Mean elastic modulus values obtained using LVDTs exhibited a good match with analytically predicted values. In contrast, the elastic values obtained by the DIC method were considerably higher and presented a considerable scatter of results. For instance, the Ep C,0 for G-XLam3 and G-XLam5 panels were 17·22 and 15·67 GPa, and 14·86 and 12·48 GPa, using the DIC and LVDT methods, respectively. In general, G-XLam panels with a fifth of the cross-sectional thickness and twice the density of analogous cross-laminated timber exhibited an approximately two-fold increase in Ep C,0 and Ep C,90. Overall, this research provides guidelines for the assessment and standardisation of the testing procedures for similar engineered bamboo products using contact and non-contact methods and highlights the potential of using G-XLam panels in stiffness-driven applications and in combination with wood for structural purposes

Wall-thickness-dependent strength of nanotubular ZnO

We fabricate nanotubular ZnO with wall thickness of 45, 92, 123 nm using nanoporous gold (np-Au) with ligament diameter at necks of 1.43 mu m as sacrificial template. Through micro-tensile and micro-compressive testing of nanotubular ZnO structures, we find that the exponent m in (sigma) over bar proportional to (rho) over bar (m), where (sigma) over bar is the relative strength and (rho) over bar is the relative density, for tension is 1.09 and for compression is 0.63. Both exponents are lower than the value of 1.5 in the Gibson-Ashby model that describes the relation between relative strength and relative density where the strength of constituent material is independent of external size, which indicates that strength of constituent ZnO increases as wall thickness decreases. We find, based on hole-nanoindentation and glazing incidence X-ray diffraction, that this wall-thickness-dependent strength of nanotubular ZnO is not caused by strengthening of constituent ZnO by size reduction at the nanoscale. Finite element analysis suggests that the wall-thickness-dependent strength of nanotubular ZnO originates from nanotubular structures formed on ligaments of np-Au