Recent research developments in polymer heat exchangers: a review

Due to their low cost, light weight and corrosive resistant features, polymer heat exchangers have been intensively studied by researchers with the aim to replace metallic heat exchangers in a wide range of applications. This paper reviews the development of polymer heat exchangers in the last decade, including cutting edge materials characteristics, heat transfer enhancement methods of polymer materials and a wide range of polymer heat exchanger applications. Theoretical modelling and experimental testing results have been reviewed and compared with literature. A recent development, the polymer micro-hollow fibre heat exchanger, is introduced and described. It is shown that polymer materials do hold promise for use in the construction of heat exchangers in many applications, but that a considerable amount of research is still required into material properties, thermal performance and life-time behaviour

A novel evaporative cooling system with a polymer hollow fibre spindle

A polymer hollow fibre evaporative cooling system with a novel configuration of fibre bundle is proposed. With the aim to avoid the flow channelling or shielding of adjacent fibres the fibres inside each bundle were made into a spindle shape to maximize contact between the air stream and the fibres. For the porous wall of hollow fibre, the vapour of evaporated water can permeate through it effectively, while the liquid water droplets can be prevented from mixing with the processed air. For various dry bulb temperatures (27 °C, 30 °C, 33 °C, 36 °C and 39 °C) and relative humidity (23%, 32% and 40%) of the inlet air, the cooling performances of the proposed novel evaporative cooling system were experimentally investigated. The variations of outlet air dry bulb temperature, wet bulb effectiveness, dew point effectiveness and cooling capacity with respect to different incoming air dry bulb temperature were studied. The effects of various incoming air Reynolds number on the heat and mass transfer coefficients, heat flux and mass flux across the polymer hollow fibre module were analysed. Experimentally derived non-dimensional heat and mass transfer correlations were compared with other correlations from literature. Due to the proposed spindle shape of hollow fibre bundle, the shielding between adjacent fibres could be mitigated greatly, therefore the heat and mass transfer performance of the proposed system demonstrated significant improvement compared with other designs reported in literature

Theoretical investigation of heat and mass transfer for hollow fibre integrated evaporative cooling system

Due to the advantages of light weight, corrosive resistant and low cost, hollow fibres have been studied as the substitute for metallic materials. A novel hollow fibre integrated evaporative cooling system, in which the hollow fibre module constitutes as the humidifier and evaporative cooler, is proposed. This novel hollow fibre integrated evaporative cooling system will provide a comfortable indoor environment for hot and dry area. Moreover, the water vapour can permeate through the hollow fibre effectively, and the liquid water droplets will be prevented from mixing with the processed air. A mathematical model, which takes into account of the heat transfer between incoming air and the circulating water inside the fiber, and the water evaporation through the fibre, is developed and analyzed. The variations of incoming air velocity, fibre inside diameter, the incoming air temperature and humidity on the evaporative cooling effectiveness were discussed in this paper. The results showed that as the incoming air velocity increased from 0.2m/s to 0.8m/s, the saturation efficiency was between 0.52 and 0.84. The theoretical investigation revealed that this novel hollow integrated evaporative cooling system is compact, which offers relatively high heat and mass transfer performance.Papers presented to the 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Costa de Sol, Spain on 11-13 July 2016

Performance analysis and design implementation of a novel polymer hollow fiber liquid desiccant dehumidifier with aqueous potassium formate

A novel cross-flow liquid desiccant polymer hollow fiber dehumidifier (PHFD) is investigated numerically in this paper. The main objective of this research is to simulate, and validate the numerical model for future design implementations. The experimentally verified simulation data will be used to develop a set of design and implementation tables and charts as the guidance for selecting the number of fibres and the solution-to-air mass flow ratio of the PHDF under given conditions. A numerical model is developed to simulate the performance of the proposed innovative dehumidifier. This model is validated against three sets of data, i.e. the experimental obtained testing results, analytical correlations and the modelling results from the literature. The influence of various operating conditions such as inlet air properties (i.e. velocity, relative humidity) and inlet solution properties (i.e. temperature, concentration, mass flow rate) on the dehumidification sensible, latent, and total effectiveness, moisture removal rate are numerically analyzed. Dimensionless parameters including the number of heat transfer unit (NTU) and the number of mass transfer unit (NTUm), the solution to air mass flow rate ratio (m*), and the air to solution specific humidity ratio () have been used to evaluate the system performance. The results show that the increase in NTU and NTUm lead to a substantial change in dehumidification effectiveness. When the NTU increases from 0.47 to 7, the sensible effectiveness rises from 0.35 to 0.95. Increasing is another good option for increasing the amount of the absorbed moisture without influencing the latent effectiveness. For an increase of from 1.4 to 2.2, the air inlet and outlet specific humidity difference varies in the range of 0.008 kg/kg and 0.018 kg/kg

Experimental investigations of polymer hollow fibre heat exchangers for building heat recovery application

Due to low cost, light weight and corrosion resistant features, polymer heat exchangers have been extensively studied by researchers with the aim to replace metallic heat exchangers in a wide range of applications. Although the thermal conductivity of polymer material is generally lower than the metallic counterparts, the large specific surface area provided by the polymer hollow fibre heat exchanger (PHFHE) offers the same or even better heat transfer performance with smaller volume and lighter weight compared with the metallic shell-and-tube heat exchangers. This paper presents the construction and experimental investigations of polypropylene based polymer hollow fibre heat exchangers in the form of shell-and-tube. The measured overall heat transfer coefficients of such PHFHEs are in the range of 258–1675 W/m2K for water to water application. The effects of various parameters on the overall heat transfer coefficient including flow rates and numbers of fibres, the effectiveness of heat exchanger, the number of heat transfer unit (NTU), and the height of transfer unit (HTU) are also discussed in this paper. The results indicate that the PHFHEs could offer a conductance per unit volume of 4 × 106 W/m3K, which is 2–8 times higher than the conventional metal heat exchangers. This superior thermal performance together with its low cost, corrosive resistant and light weight features make PHFHEs potentially very good substitutes for metallic heat recovery system for building application

Characterization of Non-heading Mutation in Heading Chinese Cabbage (Brassica rapa L. ssp. pekinensis)

Heading is a key agronomic trait of Chinese cabbage. A non-heading mutant with flat growth of heading leaves (fg-1) was isolated from an EMS-induced mutant population of the heading Chinese cabbage inbred line A03. In fg-1 mutant plants, the heading leaves are flat similar to rosette leaves. The epidermal cells on the adaxial surface of these leaves are significantly smaller, while those on the abaxial surface are much larger than in A03 plants. The segregation of the heading phenotype in the F2 and BC1 population suggests that the mutant trait is controlled by a pair of recessive alleles. Phytohormone analysis at the early heading stage showed significant decreases in IAA, ABA, JA and SA, with increases in methyl IAA and trans-Zeatin levels, suggesting they may coordinate leaf adaxial-abaxial polarity, development and morphology in fg-1. RNA-sequencing analysis at the early heading stage showed a decrease in expression levels of several auxin transport (BrAUX1, BrLAXs, and BrPINs) and responsive genes. Transcript levels of important ABA responsive genes, including BrABF3, were up-regulated in mid-leaf sections suggesting that both auxin and ABA signaling pathways play important roles in regulating leaf heading. In addition, a significant reduction in BrIAMT1 transcripts in fg-1 might contribute to leaf epinastic growth. The expression profiles of 19 genes with known roles in leaf polarity were significantly different in fg-1 leaves compared to wild type, suggesting that these genes might also regulate leaf heading in Chinese cabbage. In conclusion, leaf heading in Chinese cabbage is controlled through a complex network of hormone signaling and abaxial-adaxial patterning pathways. These findings increase our understanding of the molecular basis of head formation in Chinese cabbage

Internalization and Transport of PEGylated Lipid-Based Mixed Micelles across Caco-2 Cells Mediated by Scavenger Receptor B1

The aim of this study was to get insight into the internalization and transport of PEGylat-ed mixed micelles loaded by vitamin K, as mediated by Scavenger Receptor B1 (SR-B1) that is abundantly expressed by intestinal epithelium cells as well as by differentiated Caco-2 cells. Inhibition of SR-B1 reduced endocytosis and transport of vitamin-K-loaded 0%, 30% and 50% PEGylated mixed micelles and decreased colocalization of the micelles with SR-B1. Confocal fluorescence microscopy, fluorescence-activated cell sorting (FACS) analysis, and surface plasmon resonance (SPR) were used to study the interaction between the mixed micelles of different compositions (varying vitamin K loading and PEG content) and SR-B1. Interaction of PEGylated micelles was independent of the vitamin K content, indicating that the PEG shell prevented vitamin K exposure at the surface of the micelles and binding with the receptor and that the PEG took over the micelles’ ability to bind to the receptor. Molecular docking calculations corroborated the dual binding of both vita-min K and PEG with the binding domain of SR-B1. In conclusion, the improved colloidal stability of PEGylated mixed micelles did not compromise their cellular uptake and transport due to the affinity of PEG for SR-B1. SR-B1 is able to interact with PEGylated nanoparticles and mediates their subsequent internalization and transport

A Comparative Study of MPC and Economic MPC of Wind Energy Conversion Systems

In this work, we perform a comprehensive comparative study of two advanced control algorithms—the classical tracking model predictive control (MPC) and economic MPC (EMPC)—in the optimal operation of wind energy conversion systems (WECSs). A typical 5 MW wind turbine is considered in this work. The tracking MPC is designed to track steady-state optimal operating reference trajectories determined using a maximum power point tracking (MPPT) algorithm. In the design of the tracking MPC, the entire operating region of the wind turbine is divided into four subregions depending on the wind speed. The tracking MPC tracks different optimal reference trajectories determined by the MPPT algorithm in these subregions. In the designed EMPC, a uniform economic cost function is used for the entire operating region and the division of the operating region into subregions is not needed. Two common economic performance indices of WECSs are considered in the design of the economic cost function for EMPC. The relation between the two economic performance indices and the implications of the relation on EMPC performance are also investigated. Extensive simulations are performed to show the advantages and disadvantages of the two control algorithms under different conditions. It is found that when the near future wind speed can be predicted and used in control, EMPC can improve the energy utilization by about 2% and reduce the operating cost by about 30% compared to classical tracking MPC, especially when the wind speed varies such that the tracking MPC switches between operating subregions. It is also found that uncertainty in information (e.g., future wind speed, measurement noise in wind speed) may deteriorate the performance of EMPC