Results of Gravity Observations Using a Superconducting Gravimeter at the Tibetan Plateau

The tidal and nontidal gravity change characteristics in the Tibetan Plateau region were investigated using the continuous gravity measurements recorded with a superconducting gravimeter (SG) installed in Lhasa from December 8, 2009 to September 30, 2011. The results indicated that the precision of the tidal gravity observations with the SG in Lhasa was very high. The standard deviation of the harmonic analysis for the gravity tides was 0.498 nm s-2, and the uncertainties of amplitude factors in the four main tidal waves (i.e., O1, K1, M2 and S2) were better than 0.002%. In addition, the diurnal gravity tide observations clearly revealed a pattern of nearly diurnal resonance. As a result, it is affirmed that the station should act as a local tidal gravity reference in the Tibetan Plateau and its adjacent regions. The load effects of oceanic tides are so weak that the resulting perturbation in the gravimetric factors is less than 0.6%. However, the load effects of the local atmosphere on either the tidal or the nontidal gravity observations are significant, although no seasonal variations have been found. After removing the atmospheric effects, the standard deviation of the harmonic analysis for the gravity tides decreased obviously from 4.160 to 0.498 nm s-2. Having removed the load effects of oceanic tides and local atmosphere, it is found that the tidal gravity observations are significantly different from those expected theoretically, which may be related to active tectonic movement and extremely thick crust in the Tibetan Plateau region. In addition, the Earth¡¦s free oscillations excited by 2011 Tohoku-Oki Mw 9.0 Earthquake were successfully detected

A robust detector for rolling element bearing condition monitoring based on the modulation signal bispectrum and its performance evaluation against the Kurtogram

Envelope analysis is a widely used method for rolling element bearing fault detection. To obtain high detection accuracy, it is critical to determine an optimal frequency narrowband for the envelope demodulation. However, many of the schemes which are used for the narrowband selection, such as the Kurtogram, can produce poor detection results because they are sensitive to random noise and aperiodic impulses which normally occur in practical applications. To achieve the purposes of denoising and frequency band optimisation, this paper proposes a novel modulation signal bispectrum (MSB) based robust detector for bearing fault detection. Because of its inherent noise suppression capability, the MSB allows effective suppression of both stationary random noise and discrete aperiodic noise. The high magnitude features that result from the use of the MSB also enhance the modulation effects of a bearing fault and can be used to provide optimal frequency bands for fault detection. The Kurtogram is generally accepted as a powerful means of selecting the most appropriate frequency band for envelope analysis, and as such it has been used as the benchmark comparator for performance evaluation in this paper. Both simulated and experimental data analysis results show that the proposed method produces more accurate and robust detection results than Kurtogram based approaches for common bearing faults under a range of representative scenarios

The Preparation of Au@TiO2 Yolk–Shell Nanostructure and its Applications for Degradation and Detection of Methylene Blue

Abstract This paper reports the synthesis of a new type of Au@TiO2 yolk–shell nanostructures by integrating ion sputtering method with atomic layer deposition (ALD) technique and its applications as visible light-driven photocatalyst and surface-enhanced Raman spectroscopy (SERS) substrate. Both the size and amount of gold nanoparticles confined in TiO2 nanotubes could be facilely controlled via properly adjusting the sputtering time. The unique structure and morphology of the resulting Au@TiO2 samples were investigated by using various spectroscopic and microscopic techniques in detail. It is found that all tested samples can absorb visible light with a maximum absorption at localized surface plasmon resonance (LSPR) wavelengths (550–590 nm) which are determined by the size of gold nanoparticles. The Au@TiO2 yolk–shell composites were used as the photocatalyst for the degradation of methylene blue (MB). As compared with pure TiO2 nanotubes, Au@TiO2 composites exhibit improved photocatalytic properties towards the degradation of MB. The SERS effect of Au@TiO2 yolk–shell composites was also performed to investigate the detection sensitivity of MB

Additional file 1: of The Preparation of Au@TiO2 Yolk–Shell Nanostructure and its Applications for Degradation and Detection of Methylene Blue

Supporting information. Figure S1. SEM images of CNCs. Figure S2. TEM images and the size distribution analysis of Au nanoparticles of (a1 and a2) Au-30@TiO2; (b1 and b2) Au-50@TiO2; (c1 and c2) Au-80@TiO2; (d1 and d2) Au-120@TiO2. Figure S3. TEM image of the Au-80@TiO2 after photocatalytic reaction. (DOC 11017 kb