784 research outputs found

    AGN Feedback models: Correlations with star formation and observational implications of time evolution

    Full text link
    We examine the correlation between the star formation rate (SFR) and black hole accretion rate (BHAR) across a suite of different AGN feedback models, using the time evolution of a merger simulation. By considering three different stages of evolution, and a distinction between the nuclear and outer regions of star formation, we consider 63 different cases. Despite many of the feedback models fitting the M-\sigma\ relationship well, there are often distinct differences in the SFR-BHAR correlations, with close to linear trends only being present after the merger. Some of the models also show evolution in the SFR-BHAR parameter space that is at times directly across the long-term averaged SFR-BHAR correlation. This suggests that the observational SFR-BHAR correlation found for ensembles of galaxies is an approximate statistical trend, as suggested by Hickox et al. Decomposing the SFR into nuclear and outer components also highlights notable differences between models and there is only modest agreement with observational studies examining this in Seyfert galaxies. For the fraction of the black hole mass growth from the merger event relative to the final black hole mass, we find as much as a factor of three variation among models. This also translates into a similar variation in the post-starburst black hole mass growth. Overall, we find that while qualitative features are often similar amongst models, precise quantitative analysis shows there can be quite distinct differences.Comment: Accepted to MNRAS. Comments welcom

    Butte Community Credit Union v. Lewis: A New Constitutional Standard for Evaluating General Assistance Legislation

    Get PDF
    Butte Community Credit Union v. Lewis: A New Constitutional Standard for Evaluating General Assistance Legislatio

    The properties of clusters, and the orientation of magnetic fields relative to filaments, in magnetohydrodynamic simulations of colliding clouds

    Get PDF
    Funding: LD acknowledges funding from the European Research Council for the Horizon 2020 ERC consolida-tor grant project ICYBOB, grant number 818940.We have performed Smoothed Particle Magneto-Hydrodynamics (SPMHD) calculations of colliding clouds to investigate the formation of massive stellar clusters, adopting a timestep criterion to prevent large divergence errors. We find that magnetic fields do not impede the formation of young massive clusters (YMCs), and the development of high star formation rates, although we do see a strong dependence of our results on the direction of the magnetic field. If the field is initially perpendicular to the collision, and sufficiently strong, we find that star formation is delayed, and the morphology of the resulting clusters is significantly altered. We relate this to the large amplification of the field with this initial orientation. We also see that filaments formed with this configuration are less dense. When the field is parallel to the collision, there is much less amplification of the field, dense filaments form, and the formation of clusters is similar to the purely hydrodynamical case. Our simulations reproduce the observed tendency for magnetic fields to be aligned perpendicularly to dense filaments, and parallel to low density filaments. Overall our results are in broad agreement with past work in this area using grid codes.PostprintPeer reviewe

    Component-aware Orchestration of Cloud-based Enterprise Applications, from TOSCA to Docker and Kubernetes

    Full text link
    Enterprise IT is currently facing the challenge of coordinating the management of complex, multi-component applications across heterogeneous cloud platforms. Containers and container orchestrators provide a valuable solution to deploy multi-component applications over cloud platforms, by coupling the lifecycle of each application component to that of its hosting container. We hereby propose a solution for going beyond such a coupling, based on the OASIS standard TOSCA and on Docker. We indeed propose a novel approach for deploying multi-component applications on top of existing container orchestrators, which allows to manage each component independently from the container used to run it. We also present prototype tools implementing our approach, and we show how we effectively exploited them to carry out a concrete case study

    AGN feedback models: correlations with star formation and observational implications of time evolution

    Get PDF
    We examine the correlation between the star formation rate (SFR) and black hole accretion rate (BHAR) across a suite of different active galactic nuclei (AGN) feedback models, using the time evolution of a merger simulation. By considering three different stages of evolution, and a distinction between the nuclear and outer regions of star formation, we consider 63 different cases. Despite many of the feedback models fitting the M-σ relationship well, there are often distinct differences in the SFR-BHAR correlations, with close to linear trends only being present after the merger. Some of the models also show evolution in the SFR-BHAR parameter space that is at times directly across the long-term averaged SFR-BHAR correlation. This suggests that the observational SFR-BHAR correlation found for ensembles of galaxies is an approximate statistical trend, as suggested by Hickox etal. Decomposing the SFR into nuclear and outer components also highlights notable differences between models and there is only modest agreement with observational studies examining this in Seyfert galaxies. For the fraction of the black hole mass growth from the merger event relative to the final black hole mass, we find as much as a factor of 3 variation among models. This also translates into a similar variation in the post-starburst black hole mass growth. Overall, we find that while qualitative features are often similar amongst models, precise quantitative analysis shows there can be quite distinct difference

    Intercellular signaling as a cause of cell death in cyclically impacted cartilage explants

    Get PDF
    AbstractRecently, in vitro cartilage studies have shown that impact loading can produce structural damage and osteoarthritis-like changes, including tissue swelling, collagen denaturation, and cell death.Objective This study was to determine whether a signal for cell death moves through the cartilage matrix, resulting in the spread of cell death over time from impacted to unimpacted regions.Design Cyclic impacts were applied to the 2mm core of 4mm cartilage discs. Post-impact culturing extended for 3, 6 or 21 days and occurred in one of two ways. In one, discs were cultured intact. In the second, cores were removed immediately after cessation of impact and cores and rings cultured separately. Cells in apoptosis and later stage necrosis were monitored using the TUNEL assay.Results The extent of cell death in impacted samples increased with increased duration of post-impact culturing. At the early time, the majority of cell death was located in the regions of direct impact whereas after extended culture, the extent of cell death was similar in the surrounding unimpacted regions and in the impacted core region. However, the physical separation of the impacted core from the surrounding, non-impacted ring regions immediately after impact, and prior to independent culture, kept the level of cell death in the surrounding ring close to control levels, even after 21 days of incubation.Discussion These findings indicate that soluble intercellular signalling is involved in the spreading of cell death through the cartilage matrix, and that its effects can be prevented by physical isolation of the surrounding ring from the impacted core

    Explaining the imbalance in δ13C between soil and biomass in fire-prone tropical savannas

    Get PDF
    Currently, models of terrestrial 13C discrimination indicate that about one quarter of the gross primary productivity (GPP - total carbon fixed as biomass by plants) by the terrestrial biosphere is attributable to tropical savanna/grassland plants that use the C, photosynthetic pathway. However, the fraction of C,-derived biomass in soil organic carbon in savanna systems is much lower than these GPP estimates imply. Determining this imbalance has significant implications for correctly interpreting soil and palaeosol carbon isotope data, and for modelling studies that use variations in the atmospheric δ13CO, record to apportion sources and sinks of carbon. Here, we present preliminary results using hydrogen pyrolysis (HyPy) for quantifying the abundance and identifying the source of pyrogenic carbon (PC) in tropical savannas of North Queensland (Australia). We collected sediment from a series of micro-catchments covering the broadest possible range of C, and C, environments, and compared the abundances and stable isotope compositions of the total organic carbon (TOC) and pyrogenic carbon (PC) fractions. Hydrogen pyrolysis (HyPy) can be used to quantify the production, fate and stable isotope composition of PC produced by vegetation burning. HyPy is pyrolysis (up to ~600°C) under high hydrogen pressures (>10 MPa) in the presence of a catalyst, and when applied to sediments, soils, or organic samples results in the reductive removal of labile organic matter. Therefore, this technique offers great potential to effectively isolate and quantify pyrogenic carbon in a rapid and cost effective manner. Moreover, comparison of the stable carbon isotope composition of PC with bulk carbon has the potential to discern if there is a dominant vegetation source contributing to burning. The results indicate that the δ13C value of PC in the sediments is up 6‰ higher than the 613C value of TOC. There is a larger difference when TOC abundances in the sediments are lowest. This suggests a significant component of C,-derived PC is present in the sediments, even when the proportion of C, biomass in the catchment is relatively low. This in turn, provides evidence for the preferential combustion and transport of C4-derived PC in tropical savannas. Savanna fires preferentially burn the grass understorey rather than large trees, leading to a bias toward the finer C,-derived PC being exported from a fire and accumulated in the sedimentary record while large particles of Crderived PC are more likely to remain at the site of burning. Our preliminary data suggest that application of HyPy in environmental studies enables accurate quantification of an essential component of the terrestrial C cycle. Moreover, the use of HyPy also enables the reliable determination of the stable carbon isotope composition of PC, which will enable deeper understanding of the dynamic role of biomass burning in the global carbon cycle

    A Simplified Approach for the Rapid Generation of Transient Heat-Shield Environments

    Get PDF
    A simplified approach has been developed whereby transient entry heating environments are reliably predicted based upon a limited set of benchmark radiative and convective solutions. Heating, pressure and shear-stress levels, non-dimensionalized by an appropriate parameter at each benchmark condition are applied throughout the entry profile. This approach was shown to be valid based on the observation that the fully catalytic, laminar distributions examined were relatively insensitive to altitude as well as velocity throughout the regime of significant heating. In order to establish a best prediction by which to judge the results that can be obtained using a very limited benchmark set, predictions based on a series of benchmark cases along a trajectory are used. Solutions which rely only on the limited benchmark set, ideally in the neighborhood of peak heating, are compared against the resultant transient heating rates and total heat loads from the best prediction. Predictions based on using two or fewer benchmark cases at or near the trajectory peak heating condition, yielded results to within 5-10 percent of the best predictions. Thus, the method provides transient heating environments over the heat-shield face with sufficient resolution and accuracy for thermal protection system design and also offers a significant capability to perform rapid trade studies such as the effect of different trajectories, atmospheres, or trim angle of attack, on convective and radiative heating rates and loads, pressure, and shear-stress levels
    corecore