29550) and research facilities provided under HD 05876 to the Center for Demography and

. The questions posed by life course researchers often differ in fundamental ways from those posed by sociologists, developmental psychologists, or economists (Elder 1998; Mayer and Tuma 1990). For example, life course researchers often focus analytic attention on transitions marking adolescence or early adulthood, and the roles and statuses accompanying such transitions (Modell

Augmentation of the mechanical and chemical resistance characteristics of an Al2O3-based refractory by means of high power diode laser surface treatment

Augmentation of the wear rate and wear life characteristics of an Al2O3-based refractory within both normal and corrosive (NaOH and HNO3) environmental conditions was effected by means of high power diode laser (HPDL) surface treatment. Life assessment testing revealed that the HPDL generated glaze increased the wear life of the Al2O3-based refractory by 1.27 to 13.44 times depending upon the environmental conditions. Such improvements are attributed to the fact that after laser treatment, the microstructure of the Al2O3-based refractory was altered from a porous, randomly ordered structure, to a much more dense and consolidated structure that contained fewer cracks and porosities. In a world economy that is increasingly placing more importance on material conservation, a technique of this kind for delaying the unavoidable erosion (wear) and corrosion that materials such as the Al2O3-based refractory must face may provide an economically attractive option for contemporary engineers

A (Not So) Quick and Dirty Look at Robust M-Estimation

a. Robust estimators, those procedures that distinguish likely from unlikely distributions, sometimes are preferable to either parametric or distribution-free estimations. This WP explores statistical properties of maximum likelihood estimates, or M-Estimates, which are one kind of robust estimators. Analyses and simulations show general suitability and accuracy of one class of robust estimators. The results also show that the worst estimators are the classical parametric estimators and statistical tests. The author concludes that a research loses little by using robust estimators when the data are normally distributed, and risks serious errors using parametric estimators when the data are not normally distributed.Research support was provided in part by National Science Foundation Grant SES80- 23542

Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics

Within both normal and corrosive (NaOH and HNO3) environmental conditions, the wear rate and wear life characteristics of an Al2O3-based refractory were greatly enhanced by means of CO2 and high power diode laser (HPDL) surface treatment. Such improvements are attributed to the fact that after laser treatment, the microstructure of the Al2O3-based refractory was altered from a porous, randomly ordered structure, to a much more dense and consolidated structure that contained fewer cracks and porosities. What is more, resulting from the different rates of solidification brought about by differences in the wavelengths of the two lasers, dissimilar microstructures were subsequently generated. Indeed, despite the fact that the glaze thickness was less, the wear life of the HPDL treated surface exceeded that of the CO2 laser treated surface in all the test environments owing to its finer, more densely packed and less cracked microstructure

A portable high power diode laser-based single-stage ceramic tile grout sealing system

By means of a 60 W high power diode laser (HPDL) and a specially developed grout material the void between adjoining ceramic tiles has been successfully sealed. A single-stage process has been developed which uses a crushed ceramic tile mix to act as a tough, inexpensive bulk substrate and a glazed enamel surface to provide an impervious surface glaze. The single-stage ceramic tile grout sealing process yielded seals produced in normal atmospheric conditions that displayed no discernible cracks and porosities. The single-stage grout is simple to formulate and easy to apply. Tiles were successfully sealed with power densities as low as 200 kW/mm2 and at rates of up to 600 mm/min. Bonding of the enamel to the crushed ceramic tile mix was identified as being primarily due to van der Waals forces and, on a very small scale, some of the crushed ceramic tile mix material dissolving into the glaze. In terms of mechanical, physical and chemical characteristics, the single-stage ceramic tile grout was found to be far superior to the conventional epoxy tile grout and, in many instances, matched and occasionally surpassed that of the ceramic tiles themselves. What is more, the development of a hand-held HPDL beam delivery unit and the related procedures necessary to lead to the commercialisation of the single-stage ceramic tile grout sealing process are presented. Further, an appraisal of the potential hazards associated with the use of the HPDL in an industrial environment and the solutions implemented to ensure that the system complies with the relevant safety standards are given

Single-stage sealing of ceramic tiles by means of high power diode laser radiation

An investigation has been carried out using a 60 W high power diode laser (HPDL) to determine the feasibility of sealing the void between adjoining ceramic tiles with a specially developed grout material. A single-stage process has subsequently been devised using a new grout material which consists of two distinct components: a crushed ceramic tile mix substrate and a glazed enamel surface; the crushed ceramic tile mix provides a tough, inexpensive bulk substrate, whilst the enamel provides an impervious surface glaze. HPDL processing has resulted in crack and porosity free seals produced in normal atmospheric conditions. The single-stage grout is simple to formulate and easy to apply. Tiles were successfully sealed with power densities as low as 750 W/cm2 and at rates of up to 420 mm/min. Bonding of the enamel to the crushed ceramic tile mix was identified as being primarily due to van der Waals forces and, on a very small scale, some of the crushed ceramic tile mix material dissolving into the glaze

Utilization of direct smears of thyroid fine‐needle aspirates for ancillary molecular testing: A comparison of two proprietary testing platforms

Background Ancillary molecular testing has been recommended for thyroid fine‐needle aspirates (FNA) with indeterminate cytologic diagnoses. Rosetta Genomics and Interpace Diagnostics have developed assays that can utilize direct smears as the testing substrate. Methods A retrospective study of indeterminate thyroid FNAs with known histologic follow‐up was performed. One Diff‐Quik‐stained smear and one Papanicolaou‐stained smear with similar cellularity (at least 60‐100 lesional cells) from each case were sent to Rosetta and Interpace, respectively, for analysis. The results were directly compared and correlated with the final histopathology. Neither company was aware of the follow‐up histologic findings in these cases. Results A total of 10 thyroid FNAs were identified from our 2015 files. The cytologic diagnoses included follicular lesion of undetermined significance (FLUS, n = 5), follicular neoplasm/suspicious for follicular neoplasm (FN/SFN, n = 4), and suspicious for malignancy (SM, n = 1). Of the seven cases with benign histology, six smears were classified as benign by the RosettaGX microRNA classifier, and one case was designated as suspicious. Five cases were negative by both ThyGenX oncogene panel and ThyraMIR microRNA classifier. One case was negative by ThyGenX and positive on follow‐up ThyraMIR, and one case was positive for KRAS mutation and positive on ThyraMIR. Both the RosettaGX and ThyGenX/ThyraMIR tests demonstrated positive results for the three histologically malignant cases. Conclusion This study demonstrates that two molecular testing platforms performed equally well using our stained direct smears. Both molecular tests revealed a 100% negative predictive rate. RosettaGX showed a 75% positive predictive value in comparison to 60% for ThyGenX/ThyraMIR

The Physical Connections Among IR QSOs, PG QSOs and Narrow-Line Seyfert 1 Galaxies

We study the properties of infrared-selected QSOs (IR QSOs), optically-selected QSOs (PG QSOs) and Narrow Line Seyfert 1 galaxies (NLS1s). We compare their properties from the infrared to the optical and examine various correlations among the black hole mass, accretion rate, star formation rate and optical and infrared luminosities. We find that the infrared excess in IR QSOs is mostly in the far infrared, and their infrared spectral indices suggest that the excess emission is from low temperature dust heated by starbursts rather than AGNs. The infrared excess is therefore a useful criterion to separate the relative contributions of starbursts and AGNs. We further find a tight correlation between the star formation rate and the accretion rate of central AGNs for IR QSOs. The ratio of the star formation rate and the accretion rate is about several hundred for IR QSOs, but decreases with the central black hole mass. This shows that the tight correlation between the stellar mass and the central black hole mass is preserved in massive starbursts during violent mergers. We suggest that the higher Eddington ratios of NLS1s and IR QSOs imply that they are in the early stage of evolution toward classical Seyfert 1's and QSOs, respectively.Comment: 32 pages, 6 figures, accepted by Ap

A γ-secretase inhibitor, but not a γ-secretase modulator, induced defects in BDNF axonal trafficking and signaling: evidence for a role for APP.

Clues to Alzheimer disease (AD) pathogenesis come from a variety of different sources including studies of clinical and neuropathological features, biomarkers, genomics and animal and cellular models. An important role for amyloid precursor protein (APP) and its processing has emerged and considerable interest has been directed at the hypothesis that Aβ peptides induce changes central to pathogenesis. Accordingly, molecules that reduce the levels of Aβ peptides have been discovered such as γ-secretase inhibitors (GSIs) and modulators (GSMs). GSIs and GSMs reduce Aβ levels through very different mechanisms. However, GSIs, but not GSMs, markedly increase the levels of APP CTFs that are increasingly viewed as disrupting neuronal function. Here, we evaluated the effects of GSIs and GSMs on a number of neuronal phenotypes possibly relevant to their use in treatment of AD. We report that GSI disrupted retrograde axonal trafficking of brain-derived neurotrophic factor (BDNF), suppressed BDNF-induced downstream signaling pathways and induced changes in the distribution within neuronal processes of mitochondria and synaptic vesicles. In contrast, treatment with a novel class of GSMs had no significant effect on these measures. Since knockdown of APP by specific siRNA prevented GSI-induced changes in BDNF axonal trafficking and signaling, we concluded that GSI effects on APP processing were responsible, at least in part, for BDNF trafficking and signaling deficits. Our findings argue that with respect to anti-amyloid treatments, even an APP-specific GSI may have deleterious effects and GSMs may serve as a better alternative