10,640 research outputs found
Design, modeling, and analysis of multi-channel demultiplexer/demodulator
Traditionally, satellites have performed the function of a simple repeater. Newer data distribution satellite architectures, however, require demodulation of many frequency division multiplexed uplink channels by a single demultiplexer/demodulator unit, baseband processing and routing of individual voice/data circuits, and remodulation into time division multiplexed (TDM) downlink carriers. The TRW MCDD (Multichannel Demultiplexer/Multirate Demodulator) operates on a 37.4 MHz composite input signal. Individual channel data rates are either 64 Kbps or 2.048 Mbps. The wideband demultiplexer divides the input signal into 1.44 MHz segments containing either a single 2.048 Mbps channel or thirty two 64 Kbps channels. In the latter case, the narrowband demultiplexer further divides the single 1.44 MHz wideband channel into thirty two 45 KHz narrowband channels. With this approach the time domain Fast Fourier Transformation (FFT) channelizer processing capacity is matched well to the bandwidth and number of channels to be demultiplexed. By using a multirate demodulator fewer demodulators are required while achieving greater flexibility. Each demodulator can process a wideband channel or thirty two narrowband channels. Either all wideband channels, a mixture of wideband and narrowband channels, or all narrowband channels can be demodulated. The multirate demodulator approach also has lower nonrecurring costs since only one design and development effort is needed. TRW has developed a proof of concept (POC) model which fully demonstrates the signal processing fuctions of MCDD. It is capable of processing either three 2.048 Mbps channels or two 2.048 Mbps channels and thirty two 64 Kbps channels. An overview of important MCDD system engineering issues is presented as well as discussion on some of the Block Oriented System Simulation analyses performed for design verification and selection of operational parameters of the POC model. Systems engineering analysis of the POC model confirmed that the MCDD concepts are not only achievable but also balance the joint goals of minimizing on-board complexity and cost of ground equipment, while retaining the flexibility needed to meet a wide range of system requirements
Immunological and Therapeutic Strategies against Salmonid Cryptobiosis
Salmonid cryptobiosis is caused by the haemoflagellate, Cryptobia
salmositica. Clinical signs of the disease in salmon (Oncorhynchus
spp.) include exophthalmia, general oedema, abdominal distension
with ascites, anaemia, and anorexia. The disease-causing factor is
a metalloprotease and the monoclonal antibody (mAb-001) against it is therapeutic.
MAb-001 does not fix complement but agglutinates the parasite. Some brook charr,
Salvelinus fontinalis cannot be infected (Cryptobia-resistant); this resistance is
controlled by a dominant Mendelian locus and is inherited. In Cryptobia-resistant charr the
pathogen is lysed via the Alternative Pathway of Complement Activation. However,
some charr can be infected and they have high parasitaemias with no disease
(Cryptobia-tolerant). In infected Cryptobia-tolerant charr the metalloprotease is
neutralized by a natural antiprotease, α2 macroglobulin. Two vaccines have been developed.
A single dose of the attenuated vaccine protects 100% of salmonids (juveniles and adults) for at least 24 months.
Complement fixing antibody production and cell-mediated response
in vaccinated fish rise significantly after challenge. Fish
injected with the DNA vaccine initially have slight anaemias but
they recover and have agglutinating antibodies. On challenge,
DNA-vaccinated fish have lower parasitaemias, delayed peak
parasitaemias and faster recoveries. Isometamidium chloride is
therapeutic against the pathogen and its effectiveness is
increased after conjugation to antibodies
Ground-state electric quadrupole moment of 31Al
Ground-state electric quadrupole moment of 31Al (I =5/2+, T_1/2 = 644(25) ms)
has been measured by means of the beta-NMR spectroscopy using a spin-polarized
31Al beam produced in the projectile fragmentation reaction. The obtained Q
moment, |Q_exp(31Al)| = 112(32)emb, are in agreement with conventional shell
model calculations within the sd valence space. Previous result on the magnetic
moment also supports the validity of the sd model in this isotope, and thus it
is concluded that 31Al is located outside of the island of inversion.Comment: 5 page
Recommended from our members
Removal of NOx and NOy in Asian outflow plumes: Aircraft measurements over the western Pacific in Januray 2002
The Pacific Exploration of Asian Continental Emission Phase A (PEACE-A) aircraft measurement campaign was conducted over the western Pacific in January 2002. Correlations of carbon monoxide (CO) with carbon dioxide (CO2) and back trajectories are used to identify plumes strongly affected by Asian continental emissions. ΔCO/ΔCO2 ratios (i.e., linear regression slopes of CO-CO2) in the plumes generally fall within the variability range of the CO/CO2 emission ratios estimated from an emission inventory for east Asia, demonstrating the consistency between the aircraft measurements and the emission characterization. Removal rates of reactive nitrogen (NOx and NOy) for the study region (altitude <4 km, 124°-140°E, 25°-45°N) are estimated using the correlation with CO2, the photochemical age of the plumes, and the NOx/ CO2 emission ratio derived from the emission inventory. The plume age is estimated from the rates of hydrocarbon decay and hydroxyl radical (OH) concentration calculated using a constrained photochemical box model. The average lifetime of NOx is estimated to be 1.2 ± 0.4 days. Possible processes controlling the NOx lifetime are discussed in conjunction with results from earlier studies. The average lifetime of NOy is estimated to be 1.7 ± 0.5 days, which is comparable to the NOy lifetime of 1.7-1.8 days that has been previously reported for outflow from the United States. This similarity suggests the importance of chemical processing near the source regions in determining the NOy abundance. Copyright 2004 by the American Geophysical Union
Effects of textured compression socks on postural control in physically active elderly individuals
The aim of this investigation was to analyze the role of textured compression socks on somatosensory function in a sample of physically active elderly individuals when performing a static balancing task. Both textured insoles and athletic tape are deemed to be beneficial for enhancing proprioception because of the capacity for exploiting availability of “sensorimotor system noise”,
which enhances movement control and individuals’ joint position perception. It was hypothesized that the compression feature in knee length socks would provide greater stimulation to lower leg mechanoreceptors, and help participants achieve better balance control. Participants (N=8) performed a 30-s Romberg static balance test protocol under three conditions (barefoot; wearing commercial socks; wearing textured compression socks), in a counterbalanced order, with four levels of performance difficulty: (1) standing on a stable surface with open eyes (SO); (2) a stable surface with closed eyes (SC); (3) a foam surface
with open eyes (FO); and (4) a foam surface with closed eyes (FC). Two commonly investigated recurrence quantification analysis (RQA) measures (% Det and entropy) were extracted from the recurrence plot for multivariate analysis of variance (MANOVA). There were no significant interactions between the levels of performance difficulty and the sock treatments, p> 0.05 for both % Det and entropy in both Anterior-posterior (AP) and medial-lateral (ML) directions. There was no significant main effect of sock treatments, P> 0.05). However, a main effect for performance difficulty on % Det and entropy was observed
in both AP and ML directions. The RQA measures demonstrated that the sensory systems in elderly individuals are able to aid the adaptive re-organization of postural behaviour in response to changing task constraints (performance difficulty levels)
Autonomous Byte Stream Randomizer
Net-centric networking environments are often faced with limited resources and must utilize bandwidth as efficiently as possible. In networking environments that span wide areas, the data transmission has to be efficient without any redundant or exuberant metadata. The Autonomous Byte Stream Randomizer software provides an extra level of security on top of existing data encryption methods. Randomizing the data s byte stream adds an extra layer to existing data protection methods, thus making it harder for an attacker to decrypt protected data. Based on a generated crypto-graphically secure random seed, a random sequence of numbers is used to intelligently and efficiently swap the organization of bytes in data using the unbiased and memory-efficient in-place Fisher-Yates shuffle method. Swapping bytes and reorganizing the crucial structure of the byte data renders the data file unreadable and leaves the data in a deconstructed state. This deconstruction adds an extra level of security requiring the byte stream to be reconstructed with the random seed in order to be readable. Once the data byte stream has been randomized, the software enables the data to be distributed to N nodes in an environment. Each piece of the data in randomized and distributed form is a separate entity unreadable on its own right, but when combined with all N pieces, is able to be reconstructed back to one. Reconstruction requires possession of the key used for randomizing the bytes, leading to the generation of the same cryptographically secure random sequence of numbers used to randomize the data. This software is a cornerstone capability possessing the ability to generate the same cryptographically secure sequence on different machines and time intervals, thus allowing this software to be used more heavily in net-centric environments where data transfer bandwidth is limited
K- and Ka-band mobile-vehicular satellite-tracking reflector antenna system for the NASA ACTS mobile terminal
This paper describes the development of the K- and Ka-band mobile-vehicular satellite-tracking reflector antenna system for NASA's ACTS Mobile Terminal (AMT) project. ACTS is NASA's Advanced Communications Technology Satellites. The AMT project will make the first experimental use of ACTS soon after the satellite is operational, to demonstrate mobile communications via the satellite from a van on the road. The AMT antenna system consists of a mechanically steered small reflector antenna, using a shared aperture for both frequency bands and fitting under a radome of 23 cm diameter and 10 cm height, and a microprocessor controlled antenna controller that tracks the satellite as the vehicle moves about. The RF and mechanical characteristics of the antenna and the antenna tracking control system are discussed. Measurements of the antenna performance are presented
Evidence of metallic clustering in annealed Ga1-xMnxAs from atypical scaling behavior of the anomalous Hall coefficient
We report on the anomalous Hall coefficient and longitudinal resistivity
scaling relationships on a series of annealed Ga1-xMnxAs epilayers (x~0.055).
As-grown samples exhibit scaling parameter n of ~ 1. Near the optimal annealing
temperature, we find n ~ 2 to be consistent with recent theories on the
intrinsic origins of anomalous Hall Effect in Ga1-xMnxAs. For annealing
temperatures far above the optimum, we note n > 3, similar behavior to certain
inhomogeneous systems. This observation of atypical behavior agrees well with
characteristic features attributable to spherical resonance from metallic
inclusions from optical spectroscopy measurements.Comment: 3 pages, 3 figure
- …