1,933 research outputs found

    Boundary Layer Measurements in the Trisonic Gas-dynamics Facility using Particle Image Velocimetry with CO₂ Seeding

    Get PDF
    Particle image velocimetry (PIV) is utilized with solid carbon dioxide (CO2) seeding material to conduct boundary layer measurements in the test section of the Air Force Research Laboratory\u27s Trisonic Gas-dynamics Facility (TGF), which has a 24 inch by 24 inch cross-section. Freestream velocity was set at Mach 0.3, Mach 0.5, or Mach 0.8 while stagnation pressure ranged from 500 to 2400 pounds per square foot (psf). High pressure liquid CO2 was directed through expansion nozzles into shroud tubes which led to solidified particles in the wind tunnel stagnation chamber. Two different sets of shroud tubes were used to modify the size of dry ice particles produced and the particle number density. Shroud tubes with an inside diameter (ID) of 0.824 inches provided good particle count and coverage for stagnation pressures between 500 and 1500 psf, while 0.364 inch ID shroud tubes demonstrated good particle count and coverage for stagnation pressures over 1000 psf. Overall, the PIV results produced freestream velocity measurements and boundary layer profiles which compared well with expected values. After initial processing, turbulence data closely followed trends expected within boundary layer, but levels were somewhat higher than anticipated. When the PIV data was processed using elliptical interrogation regions, elongated in the streamwise direction, resulting turbulence levels were much closer to expectations

    The Cryogenic Refractive Indices of S-FTM16, a Unique Optical Glass for Near-Infrared Instruments

    Full text link
    The Ohara glass S-FTM16 is of considerable interest for near-infrared optical designs because it transmits well through the K band and because negative S-FTM16 elements can be used to accurately achromatize positive calcium fluoride elements in refractive collimators and cameras. Glass manufacturers have sophisticated equipment to measure the refractive index at room temperature, but cannot typically measure the refractive index at cryogenic temperatures. Near-infrared optics, however, are operated at cryogenic temperatures to reduce thermal background. Thus we need to know the temperature dependence of S-FTM16's refractive index. We report here our measurements of the thermal dependence of S-FTM16's refractive index between room temperature and ~77 K. Within our measurement errors we find no evidence for a wavelength dependence or a nonlinear temperature term so our series of measurements can be reduced to a single number. We find that Delta n_{abs} / Delta T = -2.4x10^{-6} K^{-1} between 298 K and ~77 K and in the wavelength range 0.6 micron to 2.6 micron. We estimate that the systematic error (which dominates the measurement error) in our measurement is 10%, sufficiently low for most purposes. We also find the integrated linear thermal expansion of S-FTM16 between 298 K and 77 K is -0.00167 m m^{-1}.Comment: 8 pages, including 9 figures. Uses emulateapj.cls. Accepted for publication in PAS

    Magnetic White Dwarfs from the SDSS II. The Second and Third Data Releases

    Full text link
    Fifty-two magnetic white dwarfs have been identified in spectroscopic observations from the Sloan Digital Sky Survey (SDSS) obtained between mid-2002 and the end of 2004, including Data Releases 2 and 3. Though not as numerous nor as diverse as the discoveries from the first Data Release, the collection exhibits polar field strengths ranging from 1.5MG to ~1000MG, and includes two new unusual atomic DQA examples, a molecular DQ, and five stars that show hydrogen in fields above 500MG. The highest-field example, SDSSJ2346+3853, may be the most strongly magnetic white dwarf yet discovered. Analysis of the photometric data indicates that the magnetic sample spans the same temperature range as for nonmagnetic white dwarfs from the SDSS, and support is found for previous claims that magnetic white dwarfs tend to have larger masses than their nonmagnetic counterparts. A glaring exception to this trend is the apparently low-gravity object SDSSJ0933+1022, which may have a history involving a close binary companion.Comment: 20 pages, 4 figures Accepted for publication in the Astronomical Journa

    Photonic and Opto-Electronic Applications of Polydiacetylene Films Photodeposited from Solution and Polydiacetylene Copolymer Networks

    Get PDF
    Polydiacetylenes (PDAS) are attractive materials for both electronic and photonic applications because of their highly conjugated electronic structures. They have been investigated for applications as both one-dimensional (linear chain) conductors and nonlinear optical (NLO) materials. One of the chief limitations to the use of PDAs has been the inability to readily process them into useful forms such as films and fibers. In our laboratory we have developed a novel process for obtaining amorphous films of a PDA derived from 2-methyl4-nitroaniline using photodeposition with Ultraviolet (UV) light from monomer solutions onto transparent substrates. Photodeposition from solution provides a simple technique for obtaining PDA films in any desired pattern with good optical quality. This technique has been used to produce PDA films that show potential for optical applications such as holographic memory storage and optical limiting, as well as third-order NLO applications such as all-optical refractive index modulation, phase modulation and switching. Additionally, copolymerization of diacetylenes with other monomers such as methacrylates provides a means to obtain materials with good processibility. Such copolymers can be spin cast to form films, or drawn by either melt or solution extrusion into fibers. These films or fibers can then be irradiated with UV to photopolymerize the diacetylene units to form a highly stable cross-linked PDA-copolymer network. If such films are electrically poled while being irradiated, they can achieve the asymmetry necessary for second-order NLO applications such as electro-optic switching. On Earth, formation of PDAs by the above mentioned techniques suffers from defects and inhomogeneities caused by convective flows that can arise during processing. By studying the formation of these materials in the reduced-convection, diffusion-controlled environment of space we hope to better understand the factors that affect their processing, and thereby, their nature and properties. Ultimately it may even be feasible to conduct space processing of PDAs for technological applications

    Texture Coding in the Rat Whisker System: Slip-Stick Versus Differential Resonance

    Get PDF
    Rats discriminate surface textures using their whiskers (vibrissae), but how whiskers extract texture information, and how this information is encoded by the brain, are not known. In the resonance model, whisker motion across different textures excites mechanical resonance in distinct subsets of whiskers, due to variation across whiskers in resonance frequency, which varies with whisker length. Texture information is therefore encoded by the spatial pattern of activated whiskers. In the competing kinetic signature model, different textures excite resonance equally across whiskers, and instead, texture is encoded by characteristic, nonuniform temporal patterns of whisker motion. We tested these models by measuring whisker motion in awake, behaving rats whisking in air and onto sandpaper surfaces. Resonant motion was prominent during whisking in air, with fundamental frequencies ranging from approximately 35 Hz for the long Delta whisker to approximately 110 Hz for the shorter D3 whisker. Resonant vibrations also occurred while whisking against textures, but the amplitude of resonance within single whiskers was independent of texture, contradicting the resonance model. Rather, whiskers resonated transiently during discrete, high-velocity, and high-acceleration slip-stick events, which occurred prominently during whisking on surfaces. The rate and magnitude of slip-stick events varied systematically with texture. These results suggest that texture is encoded not by differential resonant motion across whiskers, but by the magnitude and temporal pattern of slip-stick motion. These findings predict a temporal code for texture in neural spike trains

    A Groundbased Imaging Study of Galaxies Causing DLA, subDLA, and LLS Absorption in Quasar Spectra

    Full text link
    We present results from a search for galaxies that give rise to damped Lyman alpha (DLA), subDLA, and Lyman limit system (LLS) absorption at redshifts 0.1 ~< z ~< 1 in the spectra of background quasars. The sample was formed from a larger sample of strong MgII absorbers (W_0^(2796) >= 0.3 A) whose HI column densities were determined by measuring the Ly-alpha line in HST UV spectra. Photometric redshifts, galaxy colors, and proximity to the quasar sightline, in decreasing order of importance, were used to identify galaxies responsible for the absorption. Our sample includes 80 absorption systems for which the absorbing galaxies have been identified, of which 54 are presented here for the first time. The main results of this study are: (i) the surface density of galaxies falls off exponentially with increasing impact parameter, b, from the quasar sightline relative to a constant background of galaxies, with an e-folding length of ~46 kpc. Galaxies with b >~ 100 kpc calculated at the absorption redshift are statistically consistent with being unrelated to the absorption system. (ii) log N(HI) is inversely correlated with b at the 3.0 sigma level of significance. DLA galaxies are found systematically closer to the quasar sightline, by a factor of two, than are galaxies which give rise to subDLAs or LLSs. The median impact parameter is 17.4 kpc for the DLA galaxy sample, 33.3 kpc for the subDLA sample, and 36.4 kpc for the LLS sample. (iii) Absorber galaxy luminosity relative to L*, L/L*, is not significantly correlated with W_0^(2796), log N(HI), or b. (iv) DLA, subDLA, and LLS galaxies comprise a mix of spectral types, but are inferred to be predominantly late type galaxies based on their spectral energy distributions. The implications of these results are discussed. (Abridged)Comment: Accepted for publication in MNRA
    • 

    corecore