1,181 research outputs found

    Patch Plate Materials Compatibility Assessment

    Get PDF
    Lunar dust proved to be a greater problem during the Apollo missions than was originally anticipated. The highly angular, charged dust particles stuck to seals, radiators, and visors; clogged mechanisms; and abraded space suits. As reported by Apollo 12 astronaut Pete Conrad "We must have had more than a hundred hours suited work with the same equipment, and the wear was not as bad on the training suits as it is on these flight suits in just the eight hours we were out.". Dust clinging to surfaces was also transport-ed into habitable spaces leading to lung and eye irritation of the astronauts. The Apollo astronauts were on the Lunar surface less than 24 hours and experienced many dust related problems. With the Artemis program, we are planning longer stays on the surface, with more activities that have the potential to put the astronauts and equipment in contact with greater quantities of Lunar dust. The success of these missions will depend on our understanding of material interactions with Lunar dust and the development of ways to mitigate dust effects in cases where exposure to dust will lead to failure of components, unacceptable loss of power or thermal control, unacceptable loss of visibility, or health issues. Through the Lunar Surface In-novation Initiative (LSII), we are initiating a Patch Plate Materials Compatibility Assessment project. The overall goal of the three year project is to develop passive approaches to mitigate Lunar dust adhesion to surfaces for technologies that are currently at TRL levels 2-3 to bring them to TRL level 5 through ground-based assessment, culminating in a demonstration flight experiment on a Commercial Lunar Payload Services (CLPS) lander in 2022-2023. This paper discusses the detailed technical objectives and approach for this project. References: Gaier, J.R. "The Effects of Lunar Dust on EVA Systems During the Apollo Missions," NASA/TM-2005-213610/REV1, (2005), Apollo 12 Technical Crew Debriefing, December 1, 1969, pp. 10-54

    From the mouths of social media users: A focus group study exploring the social casino gaming–online gambling link

    Get PDF
    Background and aims The potential link between social casino gaming and online gambling has raised considerable concerns among clinicians, researchers and policy makers. Unfortunately, however, there is a paucity of research examining this potential link, especially among young adults. This represents a significant gap given young adults are frequently exposed to and are players of social casino games. Methods To better understand the potential link between social casino games and online gambling, we conducted three focus groups (N = 30) at two large Canadian Universities with college students who were avid social media users (who are regularly exposed to social casino games). Results Many participants spontaneously mentioned that social casino games were a great opportunity to build gambling skills before playing for real money. Importantly, some participants expressed a belief that there is a direct progression from social casino gaming to online gambling. Conversely, others believed the transition to online gambling depended on a person’s personality, rather than mere exposure to social casino games. While many young adults in our focus groups felt immune to the effects of social casino games, there was a general consensus that social casino games may facilitate the transition to online gambling among younger teenagers (i.e., 12–14 yr olds), due to the ease of accessibility and early exposure. Discussion The results of the present research point to the need for more study on the effects of social casino gambling as well as a discussion concerning regulation of social casino games in order to minimize their potential risks

    Sample size calculation for phylogenetic case Linkage

    Get PDF
    Sample size calculations are an essential component of the design and evaluation of scientific studies. However, there is a lack of clear guidance for determining the sample size needed for phylogenetic studies, which are becoming an essential part of studying pathogen transmission. We introduce a statistical framework for determining the number of true infector- infectee transmission pairs identified by a phylogenetic study, given the size and population coverage of that study. We then show how characteristics of the criteria used to determine linkage and aspects of the study design can influence our ability to correctly identify transmission links, in sometimes counterintuitive ways. We test the overall approach using outbreak simulations and provide guidance for calculating the sensitivity and specificity of the linkage criteria, the key inputs to our approach. The framework is freely available as the R package phylosamp, and is broadly applicable to designing and evaluating a wide array of pathogen phylogenetic studies

    Structural or Dispositional? An Experimental Investigation of the Experience of Winning in Social Casino Games (and Impulsivity) on Subsequent Gambling Behaviors

    Get PDF
    Background and aims: In the present research, we experimentally investigated whether the experience of winning (i.e., inflated payout rates) in a social casino game influenced social casino gamers’ subsequent decision to gamble for money. Furthermore, we assessed whether facets of dispositional impulsivity – negative and positive urgency in particular – also influenced participants’ subsequent gambling. Methods: Social casino gamers who were also current gamblers (N = 318) were asked to play a social casino game to assess their perceptions of the game in exchange for 3.Unbeknownsttothem,playerswererandomlyassignedtooneofthreeexperimentalconditions:winning(n=110),breakeven(n=103),orlosing(n=105).Afterplaying,participantswereofferedachancetogambletheir3. Unbeknownst to them, players were randomly assigned to one of three experimental conditions: winning (n = 110), break-even (n = 103), or losing (n = 105). After playing, participants were offered a chance to gamble their 3 renumeration in an online roulette game. Results: A total of 280 participants (88.1%) elected to gamble, but no between-condition variation in the decision to gamble emerged. Furthermore, there were no differences in gambling on the online roulette between condition. However, higher levels of both negative and positive urgency increased the likelihood of gambling. Finally, impulsivity did not moderate the relationship between experience of winning and decision to gamble. Conclusion: The results suggest that dispositional factors, including impulsive urgency, are implicated in the choice to gamble for social casino gamers following play

    Reliable Bonding of Composite Laminates Using Reflowable Epoxy Resins

    Get PDF
    Epoxy matrix composites assembled with adhesives maximize the performance of aerospace structures, but the possibility of forming weak bonds requires the installation of redundant fasteners, which add weight and manufacturing cost. Co-cured joints (e.g. unitized composite structures) are immune to weak bonds because the uncured resin undergoes diffusion and mixing through the joint. A means of co-curing complex structures may reduce the need for redundant fasteners in bondlines. To this end, NASA started the AERoBOND project to develop novel joining materials to enable a secondary-co-cure assembly process. Aerospace epoxy resin systems reformulated with offset stoichiometry prevented the resin from advancing beyond the gel point during a conventional autoclave cure cycle up to 180 C. The offset resins were applied to the joining surfaces of laminate preforms as prepreg. Two surfaces with complimentary offset resins were joined using conventional secondary bonding techniques. Preliminary efforts have indicated that the resulting joint has no discernable interface and appears as a conventional co-cured laminate under optical magnification. This report will discuss the initial work performed regarding formulation of the epoxy resin system using calorimetry, rheology, and mechanical testing

    Outpatient Treatment of SARS-CoV-2 Infection to Prevent COVID-19 Progression 

    Get PDF
    As of March 2021, COVID-19 has caused more than 123 million infections, and almost 3 million deaths worldwide. Dramatic advances have been made in vaccine development and non-pharmaceutical interventions to stop the spread of infection. But treatments to stop the progression of disease are limited. A wide variety of "repurposed" drugs explored for treatment of COVID-19 have had little or no benefit. More recently, intravenous monoclonal antibody (mAb) combinations have been authorized by the US FDA for emergency use (EUA) for outpatients with mild to moderate COVID-19 including some active against emerging SARS-COV-2 variants of concern (VOC). Easier to administer therapeutics including intramuscular and subcutaneous mAbs and oral antivirals are in clinical trials. Reliable, safe, effective COVID-19 treatment for early infection in the outpatient setting is of urgent and critical importance. Availability of such treatment should lead to reduced progression of COVID-19

    Laser Surface Preparation for Adhesive Bonding of Ti-6Al-4V

    Get PDF
    Adhesively bonded structures are potentially lighter in weight than mechanically fastened ones, but existing surface treatments are often considered unreliable. Two main problems in achieving reproducible and durable adhesive bonds are surface contamination and variability in standard surface preparation techniques. In this work three surface pretreatments were compared: laser etching with and without grit blasting and conventional Pasa-Jell treatment. Ti-6Al-4V surfaces were characterized by contact angle goniometry, optical microscopy, and X-ray photoelectron spectroscopy (XPS). Laser -etching was found to produce clean surfaces with precisely controlled surface topographies and PETI-5 lap shear strengths and durabilities were equivalent to those produced with Pasa-Jell

    The opposite of Dante's hell? The transfer of ideas for social housing at international congresses in the 1850s–1860s

    Get PDF
    With the advent of industrialization, the question of developing adequate housing for the emergent working classes became more pressing than before. Moreover, the problem of unhygienic houses in industrial cities did not stop at the borders of a particular nation-state; sometimes literally as pandemic diseases spread out 'transnationally'. It is not a coincidence that in the nineteenth century the number of international congresses on hygiene and social topics expanded substantially. However, the historiography about social policy in general and social housing in particular, has often focused on individual cases because of the different pace of industrial and urban development and is thus dominated by national perspectives. In this paper, I elaborate on transnational exchange processes and local adaptations and transformations. I focus on the transfer of the housing model of SOMCO in Mulhouse, (a French house building association) during social international congresses. I examine whether cross-national networking enabled and facilitated the implementation of ideas on the local scale. I will elaborate on the transmission and the local adaptation of the Mulhouse-model in Belgium. Convergences, divergences, and different factors that influenced the local transformations (personal choice, political situation, socioeconomic circumstances) will be taken into accoun

    “My Death Will Not [Be] in Vain”: Testimonials from Last Gift Rapid Research Autopsy Study Participants Living with HIV at the End of Life

    Get PDF
    End-of-life (EOL) HIV cure-related research provides a novel approach to studying HIV reservoirs. The Last Gift is a rapid autopsy research study at the University of California San Diego that enrolls terminally ill people living with HIV (PLWHIV) with a desire to contribute to HIV cure-related research. We conducted in-depth baseline and follow-up interviews with Last Gift study participants. We analyzed interview data applying conventional content analysis. Since summer 2017, 13 participants have been enrolled (n = 11 males and 2 females; aged 45-89 years) and 8 participants interviewed. Terminal illnesses included cancers, heart diseases, and neurodegenerative illnesses. Our analysis revealed five key themes: (1) The Last Gift study has tremendous meaning for participants at the end of their life. (2) HIV-specific altruism was a primary motivator to join the Last Gift study, nested within the context of community, scientific advancement, and moral obligation. (3) Participants did not expect physical benefits yet they perceived emotional/psychological, financial, and societal/scientific benefits. (4) There were minimal participant-perceived risks and concerns. (5) Last Gift participants expressed immense gratitude toward study staff. The Last Gift study provides a framework for ethical HIV cure-related research at EOL and highlighted participants' perspectives, motivations, and experiences. Knowing how PLWHIV understand and experience such studies will remain critical to designing ethical, fully informed HIV cure research protocols that are acceptable to PLWHIV
    corecore