HLA-B27 Positivity: associated health implications

HLA-B27 positivity makes the onset of autoimmune diseases such as uveitis, ankylosing spondylitis and Crohn's disease more likely to occur. Ankylosing spondylitis and Crohn's disease are two types of HLA-B27 positive diseases that demonstrate a direct association with uveitis. Although the possession of HLA-B27 positivity is not mandatory for autoimmune diseases such as uveitis to occur, HLA-B27 positivity not only makes it more likely but may modify the clinical picture in which a patient presents. In relation to assessment and diagnosis it is imperative that the medical history of patients is thoroughly examined to ensure pathological sequelae are appropriately treated. Nurses play an important role in assessing patients that have uveitis and should suspect ankylosing spondylitis or Crohn's disease may be present

Characterization of Metastatic Tumor Formation by the Colony Size Distribution

Knowledge regarding the kinetics of metastatic tumor formation, as related to the growth of the primary tumor, represents a fundamental issue in cancer biology. Using an in vivo mammalian model, we show here that one can obtain useful information from the frequency distribution of the sizes of metastatic colonies in distant organs after serial sectioning and image reconstruction. To explain the experimental findings, we constructed a biophysical model based on the respective growth patterns of the primary tumor and metastases and a stochastic process of metastatic colony formation. Heterogeneous distributions of various biological parameters were considered. We found that the elementary assumption of exponential forms of growth for the primary tumor and metastatic colonies predicts a linear relation on a log-log plot of a metastatic colony size distribution, which was consistent with the experimental results. Furthermore, the slope of the curve signifies the ratio of growth rates of the primary and the metastases. Non-exponential (Gompertzian and logistic) tumor growth patterns were also incorporated into the theory to explain possible deviation from the log-log linear relation. The observed metastasis-free probability also supported the assumption of a time-dependent Poisson process. With this approach, we determined the mechanistic parameters governing the process of metastatogenesis in the lungs for two murine tumor cell lines (KHT and MCaK). Since biological parameters specified in the model could be obtained in the laboratory, a workable metastatic "assay" may be established for various malignancies and in turn contribute in formulating rational treatment regimens for subclinical metastases.Comment: 14 pages, 6 figure

Propfan Test Assessment (PTA)

The objectives of the Propfan Test Assessment (PTA) Program were to validate in flight the structural integrity of large-scale propfan blades and to measure noise characteristics of the propfan in both near and far fields. All program objectives were met or exceeded, on schedule and under budget. A Gulfstream Aerospace Corporation GII aircraft was modified to provide a testbed for the 2.74m (9 ft) diameter Hamilton Standard SR-7 propfan which was driven by a 4475 kw (600 shp) turboshaft engine mounted on the left-hand wing of the aircraft. Flight research tests were performed for 20 combinations of speed and altitude within a flight envelope that extended to Mach numbers of 0.85 and altitudes of 12,192m (40,000 ft). Propfan blade stress, near-field noise on aircraft surfaces, and cabin noise were recorded. Primary variables were propfan power and tip speed, and the nacelle tilt angle. Extensive low altitude far-field noise tests were made to measure flyover and sideline noise and the lateral attenuation of noise. In coopertion with the FAA, tests were also made of flyover noise for the aircraft at 6100m (20,000 ft) and 10,668m (35,000 ft). A final series of tests were flown to evaluate an advanced cabin wall noise treatment that was produced under a separate program by NASA-Langley Research Center

Review of robust measurement of phosphorus in river water: sampling, storage, fractionation and sensitivity

International audienceThis paper reviews current knowledge on sampling, storage and analysis of phosphorus (P) in river waters. Potential sensitivity of rivers with different physical, chemical and biological characteristics (trophic status, turbidity, flow regime, matrix chemistry) is examined in terms of errors associated with sampling, sample preparation, storage, contamination, interference and analytical errors. Key issues identified include: The need to tailor analytical reagents and concentrations to take into account the characteristics of the sample matrix. The effects of matrix interference on the colorimetric analysis. The influence of variable rates of phospho-molybdenum blue colour formation. The differing responses of river waters to physical and chemical conditions of storage. The higher sensitivities of samples with low P concentrations to storage and analytical errors. Given high variability of river water characteristics in space and time, no single standardised methodology for sampling, storage and analysis of P in rivers can be offered. ?Good Practice' guidelines are suggested, which recommend that protocols for sampling, storage and analysis of river water for P is based on thorough site-specific method testing and assessment of P stability on storage. For wider sampling programmes at the regional/national scale where intensive site-specific method and stability testing are not feasible, ?Precautionary Practice' guidelines are suggested. The study highlights key areas requiring further investigation for improving methodological rigour. Keywords: phosphorus, orthophosphate, soluble reactive, particulate, colorimetry, stability, sensitivity, analytical error, storage, sampling, filtration, preservative, fractionation, digestio

Propfan Test Assessment (PTA): Flight test report

The Propfan Test Assessment (PTA) aircraft was flown to obtain glade stress and noise data for a 2.74m (9 ft.) diameter single rotation propfan. Tests were performed at Mach numbers to 0.85 and altitudes to 12,192m (40,000 ft.). The propfan was well-behaved structurally over the entire flight envelope, demonstrating that the blade design technology was completely adequate. Noise data were characterized by strong signals at blade passage frequency and up to 10 harmonics. Cabin noise was not so high as to preclude attainment of comfortable levels with suitable wall treatment. Community noise was not excessive

Educação ambiental na trilha ecológica da Embrapa Florestas

bitstream/CNPF-2009-09/42612/1/Doc147.pdf1 CD-ROM

Review of robust measurement of phosphorus in river water: sampling, storage, fractionation and sensitivity

This paper reviews current knowledge on sampling, storage and analysis of phosphorus (P) in river waters. Potential sensitivity of rivers with different physical, chemical and biological characteristics (trophic status, turbidity, flow regime, matrix chemistry) is examined in terms of errors associated with sampling, sample preparation, storage, contamination, interference and analytical errors. Key issues identified include: The need to tailor analytical reagents and concentrations to take into account the characteristics of the sample matrix. The effects of matrix interference on the colorimetric analysis. The influence of variable rates of phospho-molybdenum blue colour formation. The differing responses of river waters to physical and chemical conditions of storage. The higher sensitivities of samples with low P concentrations to storage and analytical errors. Given high variability of river water characteristics in space and time, no single standardised methodology for sampling, storage and analysis of P in rivers can be offered. ‘Good Practice’ guidelines are suggested, which recommend that protocols for sampling, storage and analysis of river water for P is based on thorough site-specific method testing and assessment of P stability on storage. For wider sampling programmes at the regional/national scale where intensive site-specific method and stability testing are not feasible, ‘Precautionary Practice’ guidelines are suggested. The study highlights key areas requiring further investigation for improving methodological rigour. Keywords: phosphorus, orthophosphate, soluble reactive, particulate, colorimetry, stability, sensitivity, analytical error, storage, sampling, filtration, preservative, fractionation, digestio

Characteristics of Marri (Corymbia calophylla) fruits in relation to the foraging behaviour of the Forest Red-tailed Black Cockatoo (Calyptorhynchus banksii naso)

Forest Red-tailed Black Cockatoos (Calyptorhynchus banksii naso) feed predominantly on seeds of the eucalypt Marri (Corymbia calophylla) and often only from specific feed trees. There was no difference between wet weight of fruits from feed (24.1 ± 1.72 g) and non-feed trees (23.2 ± 1.57 g), but trees from which Forest Red-tailed Black Cockatoos fed had a significantly higher seed number per fruit (3.9 ± 0.18), a greater individual dry seed weight (0.10 ± 0.003 g) and total seed weight per fruit (0.39 ± 0.02 g), and a higher ratio of total seed dry weight to fruit wet weight (0.02 ± 0.001) compared with non-feed trees (3.1 ± 0.20 seeds per fruit; 0.09 ± 0.005 g individual seed dry weight; 0.29 ± 0.020 g total seed dry weight per fruit; 0.013 ± 0.001 ratio of total seed dry weight to fruit wet weight). Discriminate analysis had a limited capacity to predict Marri use by Forest Red-tailed Black Cockatoos, correctly classifying about 70 % of feed trees. Seed number and total seed mass were the best fruit characteristics for the prediction of tree type. We conclude that Forest Red-tailed Black Cockatoos selectively forage from trees with fruits that have a high seed yield, but the method by which the cockatoos select these trees is unclear

Study of overload effects in bainitic steel by synchrotron X-ray diffraction

This work presents an in-situ characterisation of crack-tip strain fields following an overload bymeans of synchrotron X-ray diffraction. The study is made on very fine grained bainitic steel, thus allowing avery high resolution so that small changes occurring around the crack-tip were captured along the crack plane atthe mid-thickness of the specimen. We have followed the crack as it grew through the overload location. Oncethe crack-tip has progressed past the overload event there is strong evidence that the crack faces contact in theregion of the overload event (though not in the immediate vicinity of the current locations of the crack tip) atKmin even when the crack has travelled 1mm beyond the overload location. It was also found that at Kmax thepeak tensile strain ahead of the crack-tip decreases soon after the overload is applied and then graduallyrecovers as the crack grows past the compressive region created by the overload

Residual stress control of multipass welds using low transformation temperature fillers

Low transformation temperature (LTT) weld fillers can be used to replace tensile weld residual stresses with compressive ones and reduce the distortion of single-pass welds in austenitic plates. By contrast, weld fillers in multipass welds experience a number of thermal excursions, meaning that the benefit of the smart LTT fillers may not be realised. Here, neutron diffraction and the contour method are used to measure the residual stress in an eight pass groove weld of a 304 L stainless steel plate using the experimental LTT filler Camalloy 4. Our measurements show that the stress mitigating the effect of Camalloy 4 is indeed diminished during multipass welding. We propose a carefully selected elevated interpass hold temperature and demonstrate that this restores the LTT capability to successfully mitigate residual tensile stresses