The nature and determinants of opinion leadership in Lesotho

This research investigates the nature, the occurrence and the factors influencing opinion leadership in Lesotho. The focus is on a typical rural district where 200 maize farmers were randomly selected and their opinion leaders identified by means of sociometric methods with the number of nominations as the major indicator of degree of influence or strength of opinion leadership. The findings confirm the importance of opinion leadership, which is primarily influenced by age, marital status and gender, but also questions the value or quality of influence from a production efficiency point of view because opinion leaders have a lower level of formal education, make less use of the printed media, are not more efficient than their followers and tend to be very polymorphous in nature. The proper use of opinion leaders poses many challenges, but very favourable is that psychological accessibility is no constraint. Unfortunately the opposite is the case as far as distance or physical accessibility is concerned. Keywords: opinion leadership, importance, formal education, strength, influence, production efficiency South African Journal of Agricultural Extension Vol. 34(2) 2005: 260-27

The influence of clearance on friction, lubrication and squeaking in large diameter metal-on-metal hip replacements

Large diameter metal-on-metal bearings (MOM) are becoming increasingly popular, addressing the needs of young and more active patients. Clinical data has shown excellent short-to-mid-term results, though incidences of transient squeaking have been noted between implantation and up to 2 years post-operative. Geometric design features, such as clearance, have been significant in influencing the performance of the bearings. Sets of MOM bearings with different clearances were investigated in this study using a hip friction simulator to examine the influence of clearance on friction, lubrication and squeaking. The friction factor was found to be highest in the largest clearance bearings under all test conditions. The incidence of squeaking was also highest in the large clearance bearings, with all bearings in this group squeaking throughout the study. A very low incidence of squeaking was observed in the other two clearance groups. The measured lubricating film was found to be lowest in the large clearance bearings. This study suggests that increasing the bearing clearance results in reduced lubricant film thickness, increased friction and an increased incidence of squeaking

Quantitative Proteomics Reveals a "Poised Quiescence" Cellular State after Triggering the DNA Replication Origin Activation Checkpoint

An origin activation checkpoint has recently been discovered in the G1 phase of the mitotic cell cycle, which can be triggered by loss of DNA replication initiation factors such as the Cdc7 kinase. Insufficient levels of Cdc7 activate cell cycle arrest in normal cells, whereas cancer cells appear to lack this checkpoint response, do not arrest, and proceed with an abortive S phase, leading to cell death. The differential response between normal and tumor cells at this checkpoint has led to widespread interest in the development of pharmacological Cdc7 inhibitors as novel anticancer agents. We have used RNAi against Cdc7 in combination with SILAC-based high resolution MS proteomics to investigate the cellular mechanisms underlying the maintenance of the origin activation checkpoint in normal human diploid fibroblasts. Bioinformatics analysis identified clear changes in wide-ranging biological processes including altered cellular energetic flux, moderate stress response, reduced proliferative capacity, and a spatially distributed response across the mitochondria, lysosomes, and the cell surface. These results provide a quantitative overview of the processes involved in maintenance of the arrested state, show that this phenotype involves active rather than passive cellular adaptation, and highlight a diverse set of proteins responsible for cell cycle arrest and ultimately for promotion of cellular survival. We propose that the Cdc7-depleted proteome maintains cellular arrest by initiating a dynamic quiescence-like response and that the complexities of this phenotype will have important implications for the continued development of promising Cdc7-targeted cancer therapies

Cdc7 is a potent anti-cancer target in pancreatic cancer due to abrogation of the DNA origin activation checkpoint.

PURPOSE: Cdc7 is a serine/threonine kinase which is responsible for the 'firing' of replication origins leading to initiation of DNA replication. Inhibition or depletion of Cdc7 in normal cells triggers a DNA origin activation checkpoint causing a reversible G1 arrest. Here we investigate Cdc7 as a novel therapeutic target in pancreatic cancer. EXPERIMENTAL DESIGN: Cdc7 target validation was performed by immunoexpression profiling in a cohort of 73 patients with pancreatic adenocarcinoma including 24 controls. Secondly Cdc7 kinase was targeted in Capan-1 and PANC-1 pancreatic cancer cell line models using either an siRNA against Cdc7 or alternatively a small molecule inhibitor (SMI) of Cdc7 (PHA-767491). RESULTS: Cdc7 was significantly overexpressed in pancreatic adenocarcinoma compared to benign pancreatic tissue (median LI 34.3% vs. 1.3%; P<0.0001). Cdc7 knockdown using siRNA in Capan-1 and PANC-1 cells resulted in marked apoptotic cell death when compared with control cells. A prominent sub-G1 peak was seen on flow cytometry (sub-G1 51% vs. 3% and 45% vs. 0.7% in Capan-1 and PANC-1 cells, respectively). Annexin V labelling confirmed apoptosis in 64% vs. 11% and 75% vs. 8%, respectively. Western blotting showed cleavage of PARP-1 and caspase-3 and presence of γH2A.X. TUNEL assay showed strong staining in treated cells. These results were mirrored following Cdc7 kinase inhibition with PHA-767491. CONCLUSIONS: Our findings show that Cdc7 is a potent anti-cancer target in pancreatic adenocarcinoma and that Cdc7 immunoexpression levels might be used as a companion diagnostic to predict response to therapeutic siRNAs or SMIs directed against this kinase

An in vitro simulation model to assess the severity of edge loading and wear, due to variations in component positioning in hip joint replacements

The aim of this study was to develop a preclinical in vitro method to predict the occurrence and severity of edge loading condition associated with the dynamic separation of the centres of the head and cup (in the absence of impingement) for variations in surgical positioning of the cup. Specifically, this study investigated the effect of both the variations in the medial–lateral translational mismatch between the centres of the femoral head and acetabular cup and the variations in the cup inclination angles on the occurrence and magnitude of the dynamic separation, the severity of edge loading, and the wear rate of ceramic‐on‐ceramic hip replacement bearings in a multi‐station hip joint simulator during a walking gait cycle. An increased mismatch between the centres of rotation of the femoral head and acetabular cup resulted in an increased level of dynamic separation and an increase in the severity of edge loading condition which led to increased wear rate in ceramic‐on‐ceramic bearings. Additionally for a given translational mismatch, an increase in the cup inclination angle gave rise to increased dynamic separation, worst edge loading conditions, and increased wear. To reduce the occurrence and severity of edge loading, the relative positions (the mismatch) of the centres of rotation of the head and the cup should be considered alongside the rotational position of the acetabular cup. This study has considered the combination of mechanical and tribological factors for the first time in the medial–lateral axis only, involving one rotational angle (inclination) and one translational mismatch

Immunophenotypic analysis of cell cycle status in acute myeloid leukaemia: relationship to cytogenetics, genotype and clinical outcome

Cell cycle status may play an important role in directing patient therapy. We therefore determined the cell cycle status of leukaemic cells by immunophenotypic analysis of bone marrow trephine biopsies from 181 patients with acute myeloid leukaemia (AML) and correlated the results with biological features and clinical outcome. There was considerable heterogeneity between patients. The presenting white cell count significantly correlated with the proportion of non-quiescent cells (P < 0·0001), of cycling cells beyond G1 (P < 0·0001) and the speed of cycling (P < 0·0001). Profiles in acute promyelocytic leukaemia (APL) differed from non-APL and were consistent with more differentiated cells with reduced proliferative potential, but no significant differences were observed between non-APL cytogenetic risk groups. NPM1 mutations but not FLT3 internal tandem duplication (FLT3ITD ) were significantly associated with a higher proportion of cells beyond G1 (P = 0·002) and faster speed of cycling (P = 0·003). Resistance to standard cytosine arabinoside and daunorubicin induction chemotherapy was significantly related to a slower speed of cycling (P = 0·0002), as was a higher relapse rate (P = 0·05), but not with the proportion of non-quiescent cells or actively cycling cells. These results show a link between the cycling speed of AML cells and the response to chemotherapy, and help to identify a group with a very poor prognosis

The International Mass Loading Service

The International Mass Loading Service computes four loadings: a) atmospheric pressure loading; b) land water storage loading; c) oceanic tidal loading; and d) non-tidal oceanic loading. The service provides to users the mass loading time series in three forms: 1) pre-computed time series for a list of 849 space geodesy stations; 2) pre-computed time series on the global 1deg x 1deg grid; and 3) on-demand Internet service for a list of stations and a time range specified by the user. The loading displacements are provided for the time period from 1979.01.01 through present, updated on an hourly basis, and have latencies 8-20 hours.Comment: 8 pages, 3 figures, to appear in the Proceedings of the Reference Frames for Applications in Geosciences Simposium, held in Luxemboug in October 201

Nanofibres in Drug Delivery

In recent years there has been an explosion of interest in the production of nanoscale fibres for drug delivery and tissue engineering. Nanofibres in Drug Delivery aims to outline to new researchers in the field the utility of nanofibres in drug delivery, and to explain to them how to prepare fibres in the laboratory. The book begins with a brief discussion of the main concepts in pharmaceutical science. The authors then introduce the key techniques that can be used for fibre production and explain briefly the theory behind them. They discuss the experimental implementation of fibre production, starting with the simplest possible set-up and then moving on to consider more complex arrangements. As they do so, they offer advice from their own experience of fibre production, and use examples from current literature to show how each particular type of fibre can be applied to drug delivery. They also consider how fibre production could be moved beyond the research laboratory into industry, discussing regulatory and scale-up aspects

The Architectural Design Rules of Solar Systems based on the New Perspective

On the basis of the Lunar Laser Ranging Data released by NASA on the Silver Jubilee Celebration of Man Landing on Moon on 21st July 1969-1994, theoretical formulation of Earth-Moon tidal interaction was carried out and Planetary Satellite Dynamics was established. It was found that this mathematical analysis could as well be applied to Star and Planets system and since every star could potentially contain an extra-solar system, hence we have a large ensemble of exoplanets to test our new perspective on the birth and evolution of solar systems. Till date 403 exoplanets have been discovered in 390 extra-solar systems. I have taken 12 single planet systems, 4 Brown Dwarf - Star systems and 2 Brown Dwarf pairs. Following architectural design rules are corroborated through this study of exoplanets. All planets are born at inner Clarke Orbit what we refer to as inner geo-synchronous orbit in case of Earth-Moon System. By any perturbative force such as cosmic particles or radiation pressure, the planet gets tipped long of aG1 or short of aG1. Here aG1 is inner Clarke Orbit. The exoplanet can either be launched on death spiral as CLOSE HOT JUPITERS or can be launched on an expanding spiral path as the planets in our Solar System are. It was also found that if the exo-planet are significant fraction of the host star then those exo-planets rapidly migrate from aG1 to aG2 and have very short Time Constant of Evolution as Brown Dwarfs have. This vindicates our basic premise that planets are always born at inner Clarke Orbit. This study vindicates the design rules which had been postulated at 35th COSPAR Scientific Assembly in 2004 at Paris, France, under the title ,New Perspective on the Birth & Evolution of Solar Systems.Comment: This paper has been reported to Earth,Moon and Planets Journal as MOON-S-09-0007

Nuclear tools for characterising radiological dispersion in complex terrain: evaluation of regulatory and emergency response models

Routine operations of a nuclear research reactor and its facilities offer opportunities for collection of rare environmental tracer datasets which can be used for atmospheric dispersion model evaluation studies. The HIFAR reactor near Sydney, Australia, routinely emits the radioactive noble gas Ar-41, and other radionuclides such as Xe-133 and Xe-135 are also emitted from nearby radiopharmaceutical production facilities. Despite extremely low emission levels of these gases, they are nevertheless detectable using state-of-the-art technology, and sensitive detectors have been placed at four locations in the surrounding region which features complex terrain. The high research potential of this unique dataset is illustrated in the current study, in which predictions from two atmospheric dispersion models used for emergency response are compared with Ar-41 peak observations from the detector network under a range of stability conditions, and long-term integrated data is also compared with a routine impact assessment model. © 2005, Inderscience Enterprises Ltd