1,533 research outputs found
Non-critical waveguide alignment for vertically coupled microring using a mode-expanded bus architecture
Vertically coupled microrings in an all-pass filter configuration are fabricated with a range of waveguide misalignments deliberately introduced into the lithography masks to demonstrate noncritical fabrication requirements. The microrings have a mode-expanded bus design which allows a greatly reduced variation in power coupling coefficient-only 6% for fabrication misalignments as high as 1 mum. This represents a five-fold improvement in fabrication tolerance when compared with conventional design
A hybrid neuro--wavelet predictor for QoS control and stability
For distributed systems to properly react to peaks of requests, their
adaptation activities would benefit from the estimation of the amount of
requests. This paper proposes a solution to produce a short-term forecast based
on data characterising user behaviour of online services. We use \emph{wavelet
analysis}, providing compression and denoising on the observed time series of
the amount of past user requests; and a \emph{recurrent neural network} trained
with observed data and designed so as to provide well-timed estimations of
future requests. The said ensemble has the ability to predict the amount of
future user requests with a root mean squared error below 0.06\%. Thanks to
prediction, advance resource provision can be performed for the duration of a
request peak and for just the right amount of resources, hence avoiding
over-provisioning and associated costs. Moreover, reliable provision lets users
enjoy a level of availability of services unaffected by load variations
Recommended from our members
Uranyl fluoride luminescence in acidic aqueous solutions
Luminescence emission spectra and decay rates are reported for uranyl species in acidic aqueous solutions containing HF or added NaF. The longest luminescence lifetime, 0.269 {+-} 0.006 ms, was observed from uranyl in 1 M HF + 1 M HClO{sub 4} at 296 K and decreased with increasing temperature. Based on a luminescence dynamics model that assumes equilibrium among electronically excited uranyl fluoride species and free fluoride ion, this long lived uranyl luminescence in aqueous solution is attributed primarily to UO{sub 2}F{sub 2}. Studies on the effect of added LiNO{sub 3} or Na{sub 2}WO{sub 4}{center_dot}2H{sub 2}O showed relatively weak quenching of uranyl fluoride luminescence which suggests that high sensitivity determination of the UF{sub 6} content of WF{sub 6} gas should be feasible via uranyl luminescence analysis of hydrolyzed gas samples of impure WF{sub 6}
Changes in mean sea level around Great Britain over the past 200 years
We systematically assimilate a wide range of historical sea level data from around the coast of Great Britain, much of it previously unpublished, into a single comprehensive framework. We show that this greatly increased dataset allows the construction of a robust and extended Mean Sea Level curve for Great Britain covering a period of more than two centuries, and confirms that the 19th century trend was much weaker than that in the 20th century and beyond. As well as attempting to maximise the amount of newly recovered sea level observations, we have also recovered the levelling metadata necessary to connect this 19th and early 20th century data with modern records. We adjust this data for known sources of variability and estimate overall uncertainties over the entire period. Data are processed in 36 regional clusters, before recombining to compute national statistics. We investigate the advantages of extending and adjusting the time series on sea level rise trends and low order variability. Confidence limits are improved by better than 60%. The weighted linear trend since 1900 for the fully adjusted data points from all clusters when averaged annually and adjusted for Glacial Isostatic Adjustment is 2.12 mm/year ± 0.02 mm/year (1-sigma). The much lower trend estimated for the 19th Century alone is 0.24 ± 0.12 mm/yr. There is an acceleration of 0.012 mm/yr2 ± 0.003 mm/yr2 in the rate of rise over the period 1813 to 2018. These trends are quite sensitive to the GIA correction used, but their differences and accelerations are not
Improved and extended tide gauge records for the British Isles leading to more consistent estimates of sea level rise and acceleration since 1958
This paper describes methods of obtaining improved estimates of long-term sea level trends for the British Isles. This is achieved by lengthening the sea level records where possible, then removing known sources of variability, and then further adjusting for datum errors that are revealed by the previous processes after verification using metadata from archived sources. Local sea level variability is accounted for using a tide and surge model. Far field variability is accounted for using a “common mode”. This combination reduces the residual variability seen at tide gauges around the coast of the British Isles to the point that a number of previously unrecognised steps in individual records become apparent, permitting a higher level of quality control to be applied. A comprehensive data archaeology exercise was carried out which showed that these step-like errors are mostly coincident with recorded site-specific changes in instrumentation, and that in many cases the periodic tide gauge calibration records can be used to quantify these steps. A smaller number of steps are confirmed by “buddy-checking” against neighbouring tide gauges. After accounting for the observed steps, using levelling information where possible and an empirical fit otherwise, the records become significantly more consistent. The steps are not found to make a large difference to the trend and acceleration observed in UK sea level overall, but their correction results in much more consistent estimates of first order (Sea Level Rise) and second order (Sea Level Acceleration) trends over this 60-year period. We find a mean rate of sea level rise of 2.39 ± 0.27 mm yr−1, and an acceleration of 0.058 ± 0.030 mm yr−2 between Jan. 1958 and Dec. 2018. The cleaner dataset also permits us to show more clearly that the variability other than that derived from local meteorology is indeed consistent around the UK, and relates to sea level changes along the eastern boundary of the North Atlantic
Evidence for Possible Phase-Separations in RuSr2(Gd,Ce)2Cu2O10-delta
An unusual thermal-magnetic hysteresis was observed between a minor magnetic
transition around 120 K and the main one at 80 K in superconducting
RuSr2(R,Ce)2Cu2O10-delta (Ru1222R) samples, where R = Gd or Eu, down to a
submicron length-scale. The observation suggests a possible phase-separation
and is consistent with the very small but universal demagnetizing factor
observed, which is difficult to reconcile with the canted spin-structure
previously proposed. In such a scenario, the unusual superconducting properties
of the Ru-based cuprates can also be understood naturally.Comment: 8 pages, 3 figures, submitted to Phys. Rev. B, "Rapid Communications"
(September 26, 2001
Synthesis effects on the magnetic and superconducting properties of RuSr2GdCu2O8
A systematic study on the synthesis of the Ru-1212 compound by preparing a
series of samples that were annealed at increasing temperatures and then
quenched has been performed. It results that the optimal temperature for the
annealing lies around 1060-1065 C; a further temperature increase worsens the
phase formation. Structural order is very important and the subsequent grinding
and annealing improves it. Even if from the structural point of view the
samples appear substantially similar, the physical characterization highlight
great differences both in the electrical and magnetic properties related to
intrinsic properties of the phase as well as to the connection between the
grains as inferred from the resistive and the Curie Weiss behaviour at high
temperature as well as in the visibility of ZFC anf FC magnetic signals.Comment: 17 pages, 12 figures. Proc. Int. Workshop " Ruthenate and
rutheno-cuprate materials: theory and experiments", Vietri, October 2001. To
be published on LNP Series, Springer Verlag, Berlin, C. Noce, A. Vecchione,
M. Cuoco, A. Romano Eds, 200
Titanium stable isotope investigation of magmatic processes on the Earth and Moon
We present titanium stable isotope measurements of terrestrial magmatic samples and lunar mare basalts with the aims of constraining the composition of the lunar and terrestrial mantles and evaluating the potential of Ti stable isotopes for understanding magmatic processes. Relative to the OL–Ti isotope standard, the δ49Ti values of terrestrial samples vary from −0.05 to +0.55‰, whereas those of lunar mare basalts vary from −0.01 to +0.03‰ (the precisions of the double spike Ti isotope measurements are ca. ±0.02‰ at 95% confidence). The Ti stable isotope compositions of differentiated terrestrial magmas define a well-defined positive correlation with SiO2 content, which appears to result from the fractional crystallisation of Ti-bearing oxides with an inferred isotope fractionation factor of View the MathML source. Primitive terrestrial basalts show no resolvable Ti isotope variations and display similar values to mantle-derived samples (peridotite and serpentinites), indicating that partial melting does not fractionate Ti stable isotopes and that the Earth's mantle has a homogeneous δ49Ti composition of +0.005 ± 0.005 (95% c.i., n=29). Eclogites also display similar Ti stable isotope compositions, suggesting that Ti is immobile during dehydration of subducted oceanic lithosphere. Lunar basalts have variable δ49Ti values; low-Ti mare basalts have δ49Ti values similar to that of the bulk silicate Earth (BSE) while high-Ti lunar basalts display small enrichment in the heavy Ti isotopes. This is best interpreted in terms of source heterogeneity resulting from Ti stable isotope fractionation associated with ilmenite–melt equilibrium during the generation of the mantle source of high-Ti lunar mare basalts. The similarity in δ49Ti between terrestrial samples and low-Ti lunar basalts provides strong evidence that the Earth and Moon have identical stable Ti isotope compositions
Damped Bogoliubov excitations of a condensate interacting with a static thermal cloud
We calculate the damping of condensate collective excitations at finite
temperatures arising from the lack of equilibrium between the condensate and
thermal atoms. We neglect the non-condensate dynamics by fixing the thermal
cloud in static equilibrium. We derive a set of generalized Bogoliubov
equations for finite temperatures that contain an explicit damping term due to
collisional exchange of atoms between the two components. We have numerically
solved these Bogoliubov equations to obtain the temperature dependence of the
damping of the condensate modes in a harmonic trap. We compare these results
with our recent work based on the Thomas-Fermi approximation.Comment: 9 pages, 3 figures included. Submitted to PR
Scaling behavior of the overlap quark propagator in Landau gauge
The properties of the momentum space quark propagator in Landau gauge are
examined for the overlap quark action in quenched lattice QCD. Numerical
calculations are done on three lattices with different lattice spacings and
similar physical volumes to explore the approach of the quark propagator toward
the continuum limit. We have calculated the nonperturbative momentum-dependent
wave function renormalization function Z(p) and the nonperturbative mass
function M(p) for a variety of bare quark masses and perform an extrapolation
to the chiral limit. We find the behavior of Z(p) and M(p) are in reasonable
agreement between the two finer lattices in the chiral limit, however the data
suggest that an even finer lattice is desirable. The large momentum behavior is
examined to determine the quark condensate.Comment: 9 pages, 5 figures, Revtex 4. Streamlined presentation, additional
data. Final versio
- …