Application of laser Doppler velocimeter to chemical vapor laser system

A laser Doppler velocimeter (LDV) system was used to measure iodide vapor flow fields inside two different-sized tubes. Typical velocity profiles across the laser tubes were obtained with an estimated +/-1 percent bias and +/-0.3 to 0.5 percent random uncertainty in the mean values and +/-2.5 percent random uncertainty in the turbulence-intensity values. Centerline velocities and turbulence intensities for various longitudinal locations ranged from 13 to 17.5 m/sec and 6 to 20 percent, respectively. In view of these findings, the effects of turbulence should be considered for flow field modeling. The LDV system provided calibration data for pressure and mass flow systems used routinely to monitor the research laser gas flow velocity

Cherenkov luminescence measurements with digital silicon photomultipliers: a feasibility study.

BackgroundA feasibility study was done to assess the capability of digital silicon photomultipliers to measure the Cherenkov luminescence emitted by a β source. Cherenkov luminescence imaging (CLI) is possible with a charge coupled device (CCD) based technology, but a stand-alone technique for quantitative activity measurements based on Cherenkov luminescence has not yet been developed. Silicon photomultipliers (SiPMs) are photon counting devices with a fast impulse response and can potentially be used to quantify β-emitting radiotracer distributions by CLI.MethodsIn this study, a Philips digital photon counting (PDPC) silicon photomultiplier detector was evaluated for measuring Cherenkov luminescence. The PDPC detector is a matrix of avalanche photodiodes, which were read one at a time in a dark count map (DCM) measurement mode (much like a CCD). This reduces the device active area but allows the information from a single avalanche photodiode to be preserved, which is not possible with analog SiPMs. An algorithm to reject the noisiest photodiodes and to correct the measured count rate for the dark current was developed.ResultsThe results show that, in DCM mode and at (10-13) °C, the PDPC has a dynamic response to different levels of Cherenkov luminescence emitted by a β source and transmitted through an opaque medium. This suggests the potential for this approach to provide quantitative activity measurements. Interestingly, the potential use of the PDPC in DCM mode for direct imaging of Cherenkov luminescence, as a opposed to a scalar measurement device, was also apparent.ConclusionsWe showed that a PDPC tile in DCM mode is able to detect and image a β source through its Cherenkov radiation emission. The detector's dynamic response to different levels of radiation suggests its potential quantitative capabilities, and the DCM mode allows imaging with a better spatial resolution than the conventional event-triggered mode. Finally, the same acquisition procedure and data processing could be employed also for other low light levels applications, such as bioluminescence

KINETIC, SPATIAL, AND TEMPORAL ASSESSENT OF OVERSPEED TOWING WITH ELASTIC TUBING

Subjects (N = 15) performed sprints over force platforms in a normal condition and in three overspeed conditions of differing elastic tube stretch length. Kinetic and kinematic data were derived. A 3 x 4 RM ANOVA was used to analyze the results. The horizontal and vertical ground reaction force (GRF), and the ratio of horizontal to vertical GRF did not differ among conditions (p ˃ 0.05). However, ground contact time was 8.3% to 10.4% shorter, time between steps was 1.4% to 2.7% lower, distance between steps was up to 1.2% greater, and velocity was 3.7% higher in some overspeed towing conditions compared to the normal condition (p ≤ 0.05). Longer tube conditions were more optimal in most cases. Compared to normal running, overspeed towing results in increased sprinting velocity despite no differences in horizontal or vertical kinetics compared to normal running

BIOMECHANICAL ANALYSIS OF TIRE FLIPPING WITH TIRES OF DIFFERENT MASSES AND THEIR POTENTIAL SPECIFICITY TO SPRINTING

This study compared the kinetics of tire flipping with different mass tires and sprinting to evaluate the potential specificity of this training stimulus. Subjects (N=15) performed tire flips with a 54.3 kg tire, a 102.1 kg tire, and sprinted on two large force platforms. Dependent variables included peak horizontal ground reaction force (HGRF), peak vertical GRF (VGRF), horizontal to vertical GRF ratio (H:V), and rate of vertical GRF development (VRFD). A RM ANOVA was used to analyze the data. Significant main effects were found for all dependent variables (p ≤ 0.03). Post-hoc analysis showed that the tires were different (p ≤ 0.04) for all dependent variables except for VRFD (p = 0.99). Post-hoc analysis showed that the 54.3 kg tire was more similar to the kinetics of sprinting for HGRF, VGRF, and H:V. Only tire flipping with a lighter tire was similar to key kinetic parameters of sprinting

Design and Use of Microphone Directional Arrays for Aeroacoustic Measurements

An overview of the development of two microphone directional arrays for aeroacoustic testing is presented. These arrays were specifically developed to measure airframe noise in the NASA Langley Quiet Flow Facility. A large aperture directional array using 35 flush-mounted microphones was constructed to obtain high resolution noise localization maps around airframe models. This array possesses a maximum diagonal aperture size of 34 inches. A unique logarithmic spiral layout design was chosen for the targeted frequency range of 2-30 kHz. Complementing the large array is a small aperture directional array, constructed to obtain spectra and directivity information from regions on the model. This array, possessing 33 microphones with a maximum diagonal aperture size of 7.76 inches, is easily moved about the model in elevation and azimuth. Custom microphone shading algorithms have been developed to provide a frequency- and position-invariant sensing area from 10-40 kHz with an overall targeted frequency range for the array of 5-60 kHz. Both arrays are employed in acoustic measurements of a 6 percent of full scale airframe model consisting of a main element NACA 632-215 wing section with a 30 percent chord half-span flap. Representative data obtained from these measurements is presented, along with details of the array calibration and data post-processing procedures

Rhamnolipids Mediate the Effects of a Gastropod Grazer in Regards to Carbon–Nitrogen Stoichiometry of Intertidal Microbial Biofilms

Microbial biofilms have co-evolved with grazing animals, such as gastropods, to develop mutually beneficial relationships. Although microbial biofilms demonstrate resilience and resistance to chemical exposure, pre-existing relationships can be negatively affected by chemical input. In this study, we determined how the grazer, Littorina littorea (common periwinkle sea snail), and a biological surfactant (rhamnolipid) interact on a phototrophic marine biofilm. Biofilms were cultured in 32 twenty-liter buckets at the Queen’s University Marine Laboratory in Portaferry, Northern Ireland on clay tiles that were either exposed to 150 ppm of a rhamnolipid solution or that had no chemical exposure. L. littorea were added into half of the buckets, and biofilms were developed over 14 days. Biofilms exposed to grazing alone demonstrated high tolerance to the disturbance, while those growing on rhamnolipid-exposed substrate demonstrated resistance but experienced slight declines in carbon and stoichiometric ratios. However, when exposed to both, biofilms had significant decreases in stoichiometry and declined in productivity and respiration. This is problematic, as continuing marine pollution increases the likelihood that biofilms will be exposed to combinations of stressors and disturbances. Loss of biofilm productivity within these areas could lead to the loss of an important food source and nutrient cycler within the marine ecosystem

Serum Tumor Necrosis Factor-Alpha Associates with Myocardial Oxygen Demand and Exercise Tolerance in Postmenopausal Women

The functional implications of serum tumor necrosis factor-alpha (TNF-α), a marker of oxidative stress, on hemodynamic parameters at rest and during physical exertion are unclear. The aims of this investigation were to examine the independent associations of TNF-α on myocardial oxygen demand at rest and during submaximal exercise, while also evaluating the association of TNF-α on exercise tolerance. Forty, postmenopausal women, provided blood samples and completed a modified-Balke protocol to measure maximal oxygen uptake (VO2max). Large artery compliance was measured by pulse contour analyses while rate-pressure product (RPP), an index of myocardial oxygen demand, was measured at rest and during two submaximal workloads (i.e., ≈55% and ≈75% VO2max). RPP was calculated by dividing the product of heart rate and systolic blood pressure (via auscultation) by 100. Exercise tolerance corresponded with the cessation of the graded exercise test. During higher-intensity exertion, ≈75% VO2max, multiple linear regression revealed a positive association (r = 0.43; p = 0.015) between TNF-α and RPP while adjusting for maximal heart rate, VO2max, large artery compliance, and percent body fat. Path analyses revealed a significant indirect effect of large artery compliance on exercise tolerance through TNF-α, β = 0.13, CI [0.03, 0.35], indicating greater levels of TNF-α associated with poorer exercise tolerance. These data suggest TNF-α independently associates with myocardial oxygen demand during physical exertion, thus highlighting the utility of higher-intensity efforts to expose important phenomena not apparent at rest. TNF-α also appears to be indirectly associated with the link between large artery compliance and exercise tolerance

KINEMATIC AND KINETIC ANALYSIS OF THE HORIZONTAL HANG CLEAN PERFORMED WITH A VARIETY OF LOADS AND THEIR COMPARISON TO THE SPRINT START

This study evaluated kinetic and kinematic aspects of the horizontal hang clean (H-HC) at a variety of loads and also compares these results to the standing sprint start (SSS). Subjects were tested during the H-HC at 30%, 50% and 70% of their five-repetition maximum (5RM), and during the SSS, using two force platforms. Analysis revealed significant differences for the H-HC conditions for the propulsive phase vertical GRF (p ≤ 0.001), propulsive phase horizontal to vertical GRF ratio (H:V) (p = 0.001), subject/barbell displacement (p ≤ 0.001), and velocity (p ≤ 0.001). The propulsive H:V of the H-HC at 30% of the 5 RM was correlated to the propulsive H:V of the first step of the SSS (p = 0.04, r = 0.55). To maximize subject anterior displacement and velocity and propulsive H:V, practitioners should use the H-HC with loads of 30% of the 5 RM. Training in this manner offers specificity for sprinting starts

BIOMECHANICAL ANALYSIS OF LOADED PLYOMETRIC EXERCISES

Plyometric intensity and specificity are determined by the exercises performed. This study assessed ground reaction forces (GRF) in the frontal (F), horizontal-anterior (H), and vertical (V) planes, and the ratio of H to V GRF (H:V) of plyometric exercises and load conditions. Subjects (N=15) performed five plyometric variations with five handheld loads on two force platforms. A two-way RM ANOVA was used. Analysis of F GRF revealed main effects for plyometric exercise (p = 0.004). Analysis of H GRF revealed main effects for plyometric load (p = .042) and plyometric exercise (p ≤ 0.001). Analysis of V GRF revealed main effects for plyometric load (p ≤ 0.001) and plyometric exercise (p ≤ 0.001). Analysis of H:V revealed main effects for plyometric exercise (p ≤ 0.001). Practitioners should use the plyometric exercises and loads that optimize the kinetics and transfer of training