Design of lightning protection for a full-authority digital engine control

The steps and procedures are described which are necessary to achieve a successful lightning-protection design for a state-of-the-art Full-Authority Digital Engine Control (FADEC) system. The engine and control systems used as examples are fictional, but the design and verification methods are real. Topics discussed include: applicable airworthiness regulation, selection of equipment transient design and control levels for the engine/airframe and intra-engine segments of the system, the use of cable shields, terminal-protection devices and filter circuits in hardware protection design, and software approaches to minimize upset potential. Shield terminations, grounding, and bonding are also discussed, as are the important elements of certification and test plans, and the role of tests and analyses. Also included are examples of multiple-stroke and multiple-burst testing. A review of design pitfalls and challenges, and status of applicable test standards such as RTCA DO-160, Section 22, are presented

Degeneration of ALF D_n Metrics

Beginning with the Legendre transform construction of hyperk\"ahler metrics, we analyze the ALF version of the D_n metrics. We determine the constraint equation obtained from extremizing the $w$ coordinate of the generating function F(z,\bar{z},u,\bar{u},w) and study its behavior as we send two of the mass parameters of the $D_n$ metric to zero. We find that the constraint equation enforces the limit that the metric becomes that of multi-Taub-NUT.Comment: 14 pages, 7 figures, LaTeX, minor corrections, to appear in JHE

Certification of lightning protection for a full-authority digital engine control

FADEC systems present many challenges to the lightning protection engineer. Verification of the protection-design adequacy for certification purposes presents additional challenges. The basic requirements of the certification plan of a FADEC is to demonstrate compliance with Federal Airworthiness Regulations (FAR) 25.1309 and 25.581. These FARs are intended for transport aircraft, but there are equivalent sections for general aviation aircraft, normal and transport rotorcraft. Military aircraft may have additional requirements. The criteria for demonstration of adequate lightning protection for a FADEC systems include the procedures outlined in FAA Advisory Circular (AC) 20-136, Protection of aircraft electrical/electronic systems against the indirect effects of lightning. As FADEC systems, including the interconnecting wiring, are generally not susceptible to direct attachment of lightning currents, the verification of protection against indirect effects is primarily described

Large-scale survey to estimate the prevalence of disorders for 192 Kennel Club registered breeds

Abstract Background Pedigree or purebred dogs are often stated to have high prevalence of disorders which are commonly assumed to be a consequence of inbreeding and selection for exaggerated features. However, few studies empirically report and rank the prevalence of disorders across breeds although such data are of critical importance in the prioritisation of multiple health concerns, and to provide a baseline against which to explore changes over time. This paper reports an owner survey that gathered disorder information on Kennel Club registered pedigree dogs, regardless of whether these disorders received veterinary care. This study aimed to determine the prevalence of disorders among pedigree dogs overall and, where possible, determine any variation among breeds. Results This study included morbidity data on 43,005 live dogs registered with the Kennel Club. Just under two thirds of live dogs had no reported diseases/conditions. The most prevalent diseases/conditions overall were lipoma (4.3%; 95% confidence interval 4.13-4.52%), skin (cutaneous) cyst (3.1%; 2.94-3.27%) and hypersensitivity (allergic) skin disorder (2.7%; 2.52-2.82%). For the most common disorders in the most represented breeds, 90 significant differences between the within breed prevalence and the overall prevalence are reported. Conclusion The results from this study have added vital epidemiological data on disorders in UK dogs. It is anticipated that these results will contribute to the forthcoming Breed Health & Conservation Plans, a Kennel Club initiative aiming to assist in the identification and prioritisation of breeding selection objectives for health and provide advice to breeders/owners regarding steps that may be taken to minimise the risk of the disease/disorders. Future breed-specific studies are recommended to report more precise prevalence estimates within more breeds

Longevity and mortality in Kennel Club registered dog breeds in the UK in 2014

Abstract Background The domestic dog is one of the most diverse mammalian species, exhibiting wide variations in morphology, behaviour and morbidity across breeds. Therefore, it is not unexpected that breeds should also exhibit variation in mortality and longevity. While shorter longevity per se may not necessarily be a welfare issue, a generally foreshortened lifespan in a breed that is accompanied by a high prevalence of a particular cause of death may reveal potentially serious welfare concerns and highlight scope to improve breed welfare. Survey data gathered directly from owners offer useful insights into canine longevity and mortality that can support the overall evidence base for welfare reforms within breeds. Results Mortality data on 5663 deceased dogs registered with the UK Kennel Club were collected from an owner-based survey. The most commonly reported causes of death were old age (13.8%), unspecified cancer (8.7%) and heart failure (4.9%); with 5.1% of deaths reported as unknown cause. Overall median age at death was 10.33 years (interquartile range: 7.17–12.83 years). Breeds varied widely in median longevity overall from the West Highland Terrier (12.71 years) to the Dobermann Pinscher (7.67 years). There was also wide variation in the prevalence of some common causes of death among breeds, and in median longevity across the causes of death. Conclusion Substantial variation in the median lifespan and the prominent causes of death exists across breeds. This study has identified some breeds with both a low median lifespan and also a high proportional mortality for one or more specific causes of death that should be considered as both potential welfare concerns as well as opportunities for improvement

USER'S GUIDE - GENERAL WEED MANAGEMENT MODEL VERSION 1.0 - DECEMBER 1994

Crop Production/Industries,

Doping of inorganic materials in microreactors – preparation of Zn doped Fe₃O₄ nanoparticles

Microreactor systems are now used more and more for the continuous production of metal nanoparticles and metal oxide nanoparticles owing to the controllability of the particle size, an important property in many applications. Here, for the first time, we used microreactors to prepare metal oxide nanoparticles with controlled and varying metal stoichiometry. We prepared and characterised Zn-substituted Fe₃O₄ nanoparticles with linear increase of Zn content (ZnxFe₃−xO₄ with 0 ≤ x ≤ 0.48), which causes linear increases in properties such as the saturation magnetization, relative to pure Fe₃O₄. The methodology is simple and low cost and has great potential to be adapted to the targeted doping of a vast array of other inorganic materials, allowing greater control on the chemical stoichiometry for nanoparticles prepared in microreactors

Helping patients discuss CINV management : development of a patient charter

In April 2012, an Expert Group of specialist cancer nurses working in a variety of settings (e.g. chemotherapy delivery, chemotherapy service design, research, nurse leadership and patient information/advocacy) participated in telephone/web-based meetings, with the aim of sharing current experience of chemotherapy-induced nausea and vomiting (CINV) management, and reaching a consensus on the development of a Patient Charter, designed to help patients understand CINV management, and setting out key questions they may wish to ask their healthcare professionals

Detailed design of a quiet high flow fan

A single stage fan was designed to demonstrate the noise abatement properties of near-sonic inlet flow and long-chord stator vanes for the reduction of both upstream and downstream propagated fan source noise. It is designed to produce a pressure ratio of 1.653:1 with an adiabatic efficiency of 83.9%. The fan has a 508 mm inlet diameter with a hub/tip ratio of 0.426 and a design tip speed of 533.4 m/sec. The design inlet specific flow rate is 219.71 kg/sec sq m and there are 10 tandem stator vanes with a combined aspect ratio of 0.54

Universal deformation rings for the symmetric group S_4

Let k be an algebraically closed field of characteristic 2, and let W be the ring of infinite Witt vectors over k. Let S_4 denote the symmetric group on 4 letters. We determine the universal deformation ring R(S_4,V) for every kS_4-module V which has stable endomorphism ring k and show that R(S_4,V) is isomorphic to either k, or W[t]/(t^2,2t), or the group ring W[Z/2]. This gives a positive answer in this case to a question raised by the first author and Chinburg whether the universal deformation ring of a representation of a finite group with stable endomorphism ring k is always isomorphic to a subquotient ring of the group ring over W of a defect group of the modular block associated to the representation.Comment: 12 pages, 2 figure