107 research outputs found
Properties of nickel-phosphorous coatings codeposited by the electroless and electrochemical plating process
At present, despite numerous studies and practical application, the process of chemical nickel plating remains imperfect. The low nickel deposition rate, the high consumption of the solution components, and the complexity of the deposition process do not contribute to the widespread use of chemical nickel plating. At the same time, chemically deposited coatings are significantly different from the electrochemical: they possess valuable properties. In the paper, the intensification method of chemical nickel plating considered through the use of the co-deposition process with chemical and electrochemical methods. The co-deposition was carried out in an acidic electrolyte solution on an aluminum plate with the stationary potential shift from - 0.01 to - 0.25 V with the use of three electrode system. The presented technique of intensification due to the combination of nickel deposition processes by chemical and electrochemical methods is able to increase the deposition rate of the coatings, and also allows influencing their composition and mechanical properties
Extracorporeal rewarming from experimental hypothermia: Effects of hydroxyethyl starch versus saline priming on fluid balance and blood flow distribution
This is the peer reviewed version of the following article:Extracorporeal rewarming from experimental hypothermia: Effects of hydroxyethyl starch versus saline priming on fluid balance and blood flow distribution which has been published in final form at https://doi.org/10.1113/EP087786. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions.Rewarming by extracorporeal circulation (ECC) is the recommended treatment for accidental hypothermia patients with cardiac instability. Hypothermia, along with initiation of ECC, introduces major changes in fluid homeostasis and blood flow. Scientific data to recommend best practice use of ECC for rewarming these patients is lacking, and no current guidelines exist concerning the choice of priming fluid for the extracorporeal circuit. The primary aim of this study was to compare the effects of different fluid protocols on fluid balance and blood flow distribution during rewarming from deep hypothermic cardiac arrest. Sixteen anaesthetized rats were cooled to deep hypothermic cardiac arrest and rewarmed by ECC. During cooling, rats were equally randomized into two groups: an extracorporeal circuit primed with saline or primed with hydroxyethyl starch (HES). Calculations of plasma volume (PV), circulating blood volume (CBV), organ blood flow, total tissue water content, global O2 delivery and consumption were made. During and after rewarming, the pump flow rate, mean arterial pressure, PV and CBV were significantly higher in HES‐treated compared with saline‐treated rats. After rewarming, the HES group had significantly increased global O2 delivery and blood flow to the brain and kidneys compared with the saline group. Rats in the saline group demonstrated a significantly higher total tissue water content in the kidneys, skeletal muscle and lung. Compared with crystalloid priming, the use of an iso‐oncotic colloid prime generates less tissue oedema and increases PV, CBV and organ blood flow during ECC rewarming. The composition of fluid additions appears to be an important factor during ECC rewarming from hypothermia
Parallel use of shake flask and microtiter plate online measuring devices (RAMOS and BioLector) reduces the number of experiments in laboratory-scale stirred tank bioreactors
Background
Conventional experiments in small scale are often performed in a Black Box fashion, analyzing only the product concentration in the final sample. Online monitoring of relevant process characteristics and parameters such as substrate limitation, product inhibition and oxygen supply is lacking. Therefore, fully equipped laboratory-scale stirred tank bioreactors are hitherto required for detailed studies of new microbial systems. However, they are too spacious, laborious and expensive to be operated in larger number in parallel. Thus, the aim of this study is to present a new experimental approach to obtain dense quantitative process information by parallel use of two small-scale culture systems with online monitoring capabilities: Respiration Activity MOnitoring System (RAMOS) and the BioLector device.
Results
The same mastermix (medium plus microorganisms) was distributed to the different small-scale culture systems: 1) RAMOS device; 2) 48-well microtiter plate for BioLector device; and 3) separate shake flasks or microtiter plates for offline sampling. By adjusting the same maximum oxygen transfer capacity (OTRmax), the results from the RAMOS and BioLector online monitoring systems supplemented each other very well for all studied microbial systems (E. coli, G. oxydans, K. lactis) and culture conditions (oxygen limitation, diauxic growth, auto-induction, buffer effects).
Conclusions
The parallel use of RAMOS and BioLector devices is a suitable and fast approach to gain comprehensive quantitative data about growth and production behavior of the evaluated microorganisms. These acquired data largely reduce the necessary number of experiments in laboratory-scale stirred tank bioreactors for basic process development. Thus, much more quantitative information is obtained in parallel in shorter time.Cluster of Excellence “Tailor-Made Fuels from Biomass”, which is funded by the Excellence Initiative by the German federal and state governments to promote science and research at German universities
A novel one-step expression and immobilization method for the production of biocatalytic preparations
The International Hypothermia Registry (IHR): Dieter's ESAO Winter Schools and Beat's International Hypothermia Registry
Parallel substrate feeding and pH-control in shaking-flasks
An intermittent feeding system for shaking-flasks was developed to close the gap between batch operated shaking-flasks and fed-batch operated as well as pH-controlled stirred tank reactors. A precise syringe pump was connected via a substrate distribution system to individual 2/2-way miniature valves, one for each of up to 16 shaking-flask. The shaking-flasks were equipped with pH-probes. A process computer controls the intermittent feeding of substrates by tracking predefined individual feeding profiles as well as the base (or acid) addition for individual pH-control of the shaking-flasks. Higher concentrations of aerobic cells with higher cellular activities were achieved in fed-batch operated and pH-controlled shaking-flasks as compared to the conventional batch operation. Physiological effects of an intermittent feeding were studied in a stirred tank reactor with a recombinant E. coli strain, which expressed the GDP-mannose-pyrophosphorylase enzyme under the control of the Inc-promoter. (C) 2001 Elsevier Science B.V. All rights reserved
Generation of metallic nanocolloidal wear particles and their reaction on inflammatory cells
On-line Überwachung von Bioprozessen im Kleinmaßstab mit einem amperometrischen Biosensor
Parallel bubblecolumns with fed-batch technique for microbial process development on a small scale
Wirkung nanokolloidaler Verschleißprodukte von CoCr und eines neuen nickelfreien Stahls auf J-774 Makrophagen
- …