Failure and impact behavior of facade panels made of glass fiber reinforced cement(GRC)

GRC is a cementitious composite material made up of a cement mortar matrix and chopped glass fibers. Due to its outstanding mechanical properties, GRC has been widely used to produce cladding panels and some civil engineering elements. Impact failure of cladding panels made of GRC may occur during production if some tool falls onto the panel, due to stone or other objects impacting at low velocities or caused by debris projected after a blast. Impact failure of a front panel of a building may have not only an important economic value but also human lives may be at risk if broken pieces of the panel fall from the building to the pavement. Therefore, knowing GRC impact strength is necessary to prevent economic costs and putting human lives at risk. One-stage light gas gun is an impact test machine capable of testing different materials subjected to impact loads. An experimental program was carried out, testing GRC samples of five different formulations, commonly used in building industry. Steel spheres were shot at different velocities on square GRC samples. The residual velocity of the projectiles was obtained both using a high speed camera with multiframe exposure and measuring the projectile’s penetration depth in molding clay blocks. Tests were performed on young and artificially aged GRC samples to compare GRC’s behavior when subjected to high strain rates. Numerical simulations using a hydrocode were made to analyze which parameters are most important during an impact event. GRC impact strength was obtained from test results. Also, GRC’s embrittlement, caused by GRC aging, has no influence on GRC impact behavior due to the small size of the projectile. Also, glass fibers used in GRC production only maintain GRC panels’ integrity but have no influence on GRC’s impact strength. Numerical models have reproduced accurately impact tests

Radiation-induced root surface caries restored with glass-ionomer cement placed in conventional and ART cavity preparations: Results at two years

The document attached has been archived with permission from the Australian Dental Association (8th Jan 2008). An external link to the publisher’s copy is included.Background: There are no published studies comparing the clinical performances of more-viscous glass-ionomer cement (GIC) restorations when placed using conventional and atraumatic restorative treatment (ART) cavity preparation methods to restore root surface caries. Methods: One dentist used encapsulated Fuji IX GP and Ketac-Molar to restore 72 conventional and 74 ART cavity preparations for 15 patients who had received cervicofacial radiation therapy. Two assessors evaluated the restorations at six, 12, and 24 months for retention, marginal defects and surface wear, and recurrent caries. Results: After two years, the cumulative restoration successes were 65.2 per cent for the conventional and 66.2 per cent for the ART cavity preparations, without statistical or clinical significance (P>0.50). Restoration dislodgement accounted for 82.8 per cent and marginal defects for 17.2 per cent of all failures. There were no instances of unsatisfactory restoration wear or recurrent caries observed. Teeth with three or more restored cervical surfaces accounted for 79.3 per cent of all failures (P<0.0001). Conclusions: For root surface caries restored with GIC, the use of hand instruments only with the ART method was an equally effective alternative to conventional rotary instrumentation for cavity preparation. Larger restorations had higher failures, usually from dislodgement.JY Hu, XC Chen, YQ Li, RJ Smales and KH Yi

Effectiveness of a blended school-based mindfulness program for the prevention of co-rumination and internalizing problems in Dutch secondary school girls:a cluster randomized controlled trial

BackgroundA growing body of literature indicates that adolescent girls who talk with close friends about interpersonal problems or worries in an excessive, speculative way, and with an intense focus on distress (i.e., co-rumination) are at heightened risk for developing internalizing symptoms and disorders as well as reduced friendship quality. However, to date, there are no prevention programs available that target high levels of co-rumination between adolescent girls. As such, we developed the blended school-based mindfulness prevention program Happy Friends, Positive Minds (HFPM) that targets co-rumination at the dyadic level, i.e., between two close female friends. The aim of this trial is to evaluate the effectiveness of HFPM to reduce co-rumination and internalizing problems and to enhance wellbeing and social-emotional behavior in Dutch adolescent girls.MethodsA cluster Randomized Controlled Trial (cRCT) will be conducted to evaluate HFPM effectiveness. We will recruit 160 female friendship dyads (n = 320 girls) aged 13 to 15 years who will be characterized by high levels of self-reported co-rumination. The cRCT has two arms: (1) an intervention condition in which 160 girls (80 friendship dyads) will receive the 14-week HFPM program in two consecutive cohorts (cohort 1 in academic year 2023/2024 and cohort 2 in academic year 2024/2025, and (2) a control condition in which 160 girls (80 dyads) will receive care-as-usual (CAU) in two consecutive cohorts (cohort 1 in academic year 2023/2024 and cohort 2 in academic year 2024/2025). Data will be collected at baseline (T0), during the program (T1;T2; T3), immediately after the program (T4), and at 1-year follow-up (T5). Participant-level self-reported risk for (early onset) depression and anxiety, self-reported and observed co-rumination, self- and friend-reported friendship quality, self-reported positive and negative affect, self-reported interpersonal responses to positive affect, and self-reported anhedonia symptoms will be the outcome variables.DiscussionThis study will provide insights into the short-term and long-term effects of the HFPM program on girls’ internalizing problems, wellbeing, and social-emotional behavior.Trial registrationInternational Standard Randomized Controlled Trials, identifier: ISRCTN54246670. Registered on 27 February 2023

Hypomineralized Second Primary Molars as Predictor of Molar Incisor Hypomineralization

Molar incisor hypomineralization (MIH) is a developmental defect of dental enamel that shares features with hypomineralized second primary molars (HSPM). Prior to permanent tooth eruption, second primary molars could have predictive value for permanent molar and incisor hypomineralization. To assess this possible relationship, a cross-sectional study was conducted in a sample of 414 children aged 8 and 9 years from the INMA cohort in Valencia (Spain). A calibrated examiner (linear-weighted Kappa 0.83) performed the intraoral examinations at the University of Valencia between November 2013 and 2014, applying the diagnostic criteria for MIH and HSPM adopted by the European Academy of Paediatric Dentistry. 100 children (24.2%) presented MIH and 60 (14.5%) presented HSPM. Cooccurrence of the two defects was observed in 11.1% of the children examined. The positive predictive value was 76.7% (63.9-86.6) and the negative predictive value 84.7% (80.6-88.3). The positive likelihood ratio (S/1-E) was 10.3 (5.9-17.9) and the negative likelihood ratio (1-S/E) 0.57 (0.47-0.68). The odds ratio was 18.2 (9.39-35.48). It was concluded that while the presence of HSPM can be considered a predictor of MIH, indicating the need for monitoring and control, the absence of this defect in primary dentition does not rule out the appearance of MIH

Effects of dental probing on occlusal surfaces - A scanning electron microscopy evaluation

The aim of this clinical-morphological study was to investigate the effects of dental probing on occlusal surfaces by scanning electron microscopy (SEM). Twenty sound occlusal surfaces of third molars and 20 teeth with initial carious lesions of 17- to 26-year-old patients (n = 18) were involved. Ten molars of each group were probed with a sharp dental probe (No. 23) before extraction; the other molars served as negative controls. After extraction of the teeth, the crowns were separated and prepared for the SEM study. Probing-related surface defects, enlargements and break-offs of occlusal pits and fissures were observed on all occlusal surfaces with initial carious lesions and on 2 sound surfaces, respectively. No traumatic defects whatsoever were visible on unprobed occlusal surfaces. This investigation confirms findings of light-microscopic studies that using a sharp dental probe for occlusal caries detection causes enamel defects. Therefore, dental probing should be considered as an inappropriate procedure and should be replaced by a meticulous visual inspection. Critical views of tactile caries detection methods with a sharp dental probe as a diagnostic tool seem to be inevitable in undergraduate and postgraduate dental education programmes. Copyright (c) 2007 S. Karger AG, Basel

Class II Division 1 malocclusion treatment with extraction of maxillary first molars:Evaluation of treatment and post-treatment changes by the PAR Index

OBJECTIVE To investigate occlusal result and post-treatment changes after orthodontic extraction of maxillary first permanent molars in patients with a Class II division 1 malocclusion. SETTING AND SAMPLE Retrospective longitudinal study in a private practice, with outcome evaluation by an independent academic hospital. Ninety-six patients (53 males, 43 females) consecutively treated by one orthodontist with maxillary first permanent molar extraction were studied, divided into three facial types, based on pre-treatment cephalometric values: hypodivergent (n = 18), normodivergent (n = 21) and hyperdivergent (n = 57). METHODS Occlusal outcome was scored on dental casts at T1 (pre-treatment), T2 (post-treatment) and T3 (mean follow-up 2.5 ± 0.9 years) using the weighted Peer Assessment Rating (PAR) Index. The paired sample t test and one-way ANOVA followed by Tukey's post hoc test were used for statistical analysis. RESULTS PAR was reduced by 95.7% and 89.9% at T2 and T3, respectively, compared with the start of treatment. The largest post-treatment changes were found for overjet and buccal occlusion. Linear regression analysis did not reveal a clear effect (R-Square 0.074) of age, sex, PAR score at T1, incremental PAR score T2-T1, overjet and overbite at T1, and facial type on the changes after treatment (incremental PAR score T3-T2). CONCLUSIONS The occlusal outcome achieved after Class II division 1 treatment with maxillary first permanent molar extractions was maintained to a large extent over a mean post-treatment follow-up of 2.5 years. Limited changes after treatment were found, for which no risk factors could be discerned

3D meso-scale modelling of concrete material in spall tests

Tensile strength is one of the key factors of concrete material that need be accurately defined in analysis of concrete structures subjected to high-speed impact loads. Dynamic tensile strength of concrete material is usually obtained by conducting laboratory tests such as direct tensile test, Brazilian splitting test and spall test. Concrete is a heterogeneous material with different components, but is conventionally assumed to be homogeneous, i.e., cement mortar only, in most previous experimental or numerical studies. The aggregates in concrete material are usually neglected owing to testing limitation and numerical simplification. It has been well acknowledged that neglecting coarse aggregates might not necessarily give accurate concrete dynamic material properties. In the present study, a 3D meso-scale model of concrete specimen with consideration of cement mortar and aggregates is developed to simulate spall tests and investigate the behaviour of concrete material under high strain rate. The commercial software LS-DYNA is used to perform the numerical simulations of spall tests. The mesh size sensitivity is examined by conducting mesh convergence tests. The reliability of the numerical model in simulating the spall tests is verified by comparing the numerical results with the experimental data from the literature. The influence of coarse aggregates on the experimental test results is studied. The wave attenuation in concrete specimen is analysed, and empirical equations are proposed for quick assessment of the test data to determine the true dynamic tensile strength of concrete material. The contributions of aggregates to dynamic strength in spall tests are quantified for modifying the test results based on mortar material in the literature

Amelogenesis imperfecta

Amelogenesis imperfecta (AI) represents a group of developmental conditions, genomic in origin, which affect the structure and clinical appearance of enamel of all or nearly all the teeth in a more or less equal manner, and which may be associated with morphologic or biochemical changes elsewhere in the body. The prevalence varies from 1:700 to 1:14,000, according to the populations studied. The enamel may be hypoplastic, hypomineralised or both and teeth affected may be discoloured, sensitive or prone to disintegration. AI exists in isolation or associated with other abnormalities in syndromes. It may show autosomal dominant, autosomal recessive, sex-linked and sporadic inheritance patterns. In families with an X-linked form it has been shown that the disorder may result from mutations in the amelogenin gene, AMELX. The enamelin gene, ENAM, is implicated in the pathogenesis of the dominant forms of AI. Autosomal recessive AI has been reported in families with known consanguinity. Diagnosis is based on the family history, pedigree plotting and meticulous clinical observation. Genetic diagnosis is presently only a research tool. The condition presents problems of socialisation, function and discomfort but may be managed by early vigorous intervention, both preventively and restoratively, with treatment continued throughout childhood and into adult life. In infancy, the primary dentition may be protected by the use of preformed metal crowns on posterior teeth. The longer-term care involves either crowns or, more frequently these days, adhesive, plastic restorations