Influence of a Large Free Stream Disturbance Level on Dynamics of a Jet in a Cross Flow

An experiment to study the physical agents that are responsible for the jet turning into the streamwise direction, and the mixing of the jet and the cross stream fluid in the case of a jet in a cross flow is discussed

Controlled side-by-side assembly of gold nanorods and dye molecules into polymer-wrapped SERRS-active clusters

The controlled side-by-side assembly of gold nanorods in solution together with Raman reporter dye molecules to create small SERRS-active clusters stabilised by a surrounding polymer layer is demonstrated. This promising new class of nanotags offers several advantages over spherical nanoparticles for bioimaging and is of potential importance for a wide range of plasmon-enhanced spectroscopies and can also serve as building blocks for more complex solution-phase nanostructures

The interaction between clothing and air weapon pellets

Comparatively few studies have been carried out on air weapon injuries yet there are significant number of injuries and fatalities caused by these low power weapons because of their availability and the public perception that because they need no licence they are assumed to be safe. In this study ballistic gel was tested by Bloom and rupture tests to check on consistency of production. Two series of tests were carried out firing into unclothed gel blocks and blocks loosely covered by different items of clothing to simulate attire (tee shirt, jeans, fleece, and jacket).The damage to the clothing caused by different shaped pellets when fired at different ranges was examined. The apparent hole size was affected by the shape of pellet (round, pointed, flat and hollow point) and whether damage was predominantly caused by pushing yarn to one side or by laceration of the yarn through cutting or tearing.The study also compared penetration into clothed gel and unclothed gel under identical conditions, and loose clothing greatly reduced penetration. With loose clothing at 9.1 m range clothing reduced penetration to 50–70% of the penetration of unclothed gel but at 18.3 m range only 7 out of 36 shots penetrated the gel. This cannot be accounted for by the energy loss at the longer range (3–7% reduction from 9.1 m to 18.3 m range in unclothed gels) and it is suggested that impulse may have a role to play.Shots that did not penetrate the gel were used to estimate the possible stopping time for the pellet (around 75 μs) and force (1700 N) or stress (100 MPa) required to bring the pellet to a halt.Even with these low energy projectiles, cloth fibres were entrained in the gel showing the potential for penetration of the body and subsequent infection

Free stream turbulence and density ratio effects on the interaction region of a jet in a cross flow

Jets of low temperature air are introduced into the aft sections of gas turbine combustors for the purpose of cooling the high temperature gases and quenching the combustion reactions. Research studies, motivated by this complex flow field, have been executed by introducing a heated jet into the cross stream of a wind tunnel. The investigation by Kamotani and Greber stands as a prime example of such investigations and it serves as the principal reference for the present study. The low disturbance level of the cross stream, in their study and in similar research investigations, is compatible with an interest in identifying the basic features of this flow field. The influence of the prototypes' strongly disturbed cross flow is not, however, made apparent in these prior investigations

Development of a temperature measurement system with application to a jet in a cross flow experiment

A temperature measurement system, which allows the simultaneous sampling of up to 80 separate thermocouples, was developed. The minimum resolution for the system corresponds to + or - 0.16 C per least significant bit of the A/D converter. The time constant values lambda, for each of the 64 thermocouples, were determined experimentally at 7 mps. Software routines were used to correct the measured temperatures for the effect of lambda for each thermocouple. The temperature measurement system was utilized to study the thermal field of a heated jet discharging perpendicularly into a low and a high disturbance level cross stream for a given momentum flux ratio and for three overheated values. The peak instantaneous temperatures reveal that strong molecular diffusion was operative. Various measures of the thermal field, for the disturbed case, suggest that the jet column remains relatively compact while being buffeted by the ambient turbulence field and that its penetration, into the cross wind, is inhibited by the presence of the strong disturbance field

Cathodoluminescence hyperspectral imaging on the nanometre scale

Extending cathodoluminescence microscopy into the hyperspectral imaging mode brings significant benefits to an already powerful nano-scale characterization tool. In this paper, we give an introduction to the technique, and illustrate its potential with examples of its application to both semiconducting and plasmonic nanostructures

Validating Continuum Lowering Models via Multi-Wavelength Measurements of Integrated X-ray Emission

X-ray emission spectroscopy is a well-established technique used to study continuum lowering in dense plasmas. It relies on accurate atomic physics models to robustly reproduce high-resolution emission spectra, and depends on our ability to identify spectroscopic signatures such as emission lines or ionization edges of individual charge states within the plasma. Here we describe a method that forgoes these requirements, enabling the validation of different continuum lowering models based solely on the total intensity of plasma emission in systems driven by narrow-bandwidth x-ray pulses across a range of wavelengths. The method is tested on published Al spectroscopy data and applied to the new case of solid-density partially-ionized Fe plasmas, where extracting ionization edges directly is precluded by the significant overlap of emission from a wide range of charge states

Complexing additives to reduce the immiscible phase formed in the hybrid ZnBr2 flow battery

The zinc-bromine redox flow battery (RFB) is one of a very few commercially viable RFB energy storage system capable of integration with intermittent renewable energy sources to deliver improved energy management. However, due to the volatility of the electrogenerated bromine and potential for its crossover from positive to negative electrolytes, this system requires the use of quaternary ammonium complexes (N-methyl-N-ethylpyrrolidinium, (MEP)) to capture this bromine. This produces an immiscible phase with the Br2 which requires a complex network of pipes, pumps and automated controls to ensure access to the electroactive material during discharge. In this work, the use of novel quaternary ammonium complexes to capture the electrogenerated bromine but to keep it in the aqueous phase is examined. Three compounds, 1-(carboxymethyl) pyridine-1-ium, 1-(2-carboxymethyl)-1-methylmorpholin-1-ium and 1-(2-carboxymethyl)-1-methylpyrrolidin-1-ium, were found to successfully reduce the volume of the immiscible phase formed on complexing with the polybromide (Brx-) whilst displaying similar enthalpy of vaporisation values as that of MEP. Electrochemical analysis also revealed that these compounds did not impact on the electrode kinetics of the Br-/Brx- reaction indicating that the resulting surface film formed with these compounds behaved as a chemically modified electrode, in contrast to the surface film formed with MEP

A More Lovingly Made World

From a visit with his children to Makers' Fayre, in New York, the author considers the rise of maker culture and amateur labour in relation to consumption, capitalism and modernity, to provide an afterword to the collection on amateur economies