Trophic Transfer of Arsenic from an Aquatic Insect to Terrestrial Insect Predators.

The movement of energy and nutrients from aquatic to terrestrial ecosystems can be substantial, and emergent aquatic insects can serve as biovectors not only for nutrients, but also for contaminants present in the aquatic environment. The terrestrial predators Tenodera aridifolia sinensis (Mantodea: Mantidae) and Tidarren haemorrhoidale (Araneae: Theridiidae) and the aquatic predator Buenoa scimitra (Hemiptera: Notonectidae) were chosen to evaluate the efficacy of arsenic transfer between aquatic and terrestrial environments. Culex tarsalis larvae were reared in either control water or water containing 1000 µg l(-1) arsenic. Adults that emerged from the control and arsenic treatments were fed to the terrestrial predators, and fourth instar larvae were fed to the aquatic predator reared in control or arsenic contaminated water. Tenodera a. sinensis fed arsenic-treated Cx. tarsalis accumulated 658±130 ng g(-1) of arsenic. There was no significant difference between control and arsenic-fed T. haemorrhoidale (range 142-290 ng g(-1)). Buenoa scimitra accumulated 5120±406 ng g(-1) of arsenic when exposed to arsenic-fed Cx. tarsalis and reared in water containing 1000 µg l(-1) arsenic. There was no significant difference between controls or arsenic-fed B. scimitra that were not exposed to water-borne arsenic, indicating that for this species environmental exposure was more important in accumulation than strictly dietary arsenic. These results indicate that transfer to terrestrial predators may play an important role in arsenic cycling, which would be particularly true during periods of mass emergence of potential insect biovectors. Trophic transfer within the aquatic environment may still occur with secondary predation, or in predators with different feeding strategies

Cyanobacteria blooms cannot be controlled by effective microorganisms (EM) from mud- or Bokashi-balls

In controlled experiments, the ability of ‘‘Effective Microorganisms (EM, in the form of mudballs or Bokashi-balls)’’ was tested for clearing waters from cyanobacteria. We found suspensions of EM-mudballs up to 1 g l-1 to be ineffective in reducing cyanobacterial growth. In all controls and EM-mudball treatments up to 1 g l-1 the cyanobacterial chlorophyll-a (Chl-a) concentrations increased within 4 weeks from&120 to 325–435 lg l-1. When pieces of EM-mudballs (42.5 g) were added to 25-l lake water with cyanobacteria, no decrease of cyanobacteria as compared to untreated controls was observed. In contrast, after 4 weeks cyanobacterial Chl-a concentrations were significantly higher in EM-mudball treatments (52 lg l-1) than in controls (20 lg l-1). Only when suspensions with extremely high EM-mudball concentrations were applied (i.e., 5 and 10 g l-1), exceeding the recommended concentrations by orders of magnitude, cyanobacterial growth was inhibited and a bloom forming concentration was reduced strongly. In these high dosing treatments, the oxygen concentration dropped initially to very low levels of 1.8 g l-1. This was most probably through forcing strong light limitation on the cyanobacteria caused by the high amount of clay and subsequent high turbidity of the water. Hence, this study yields no support for the hypothesis that EM is effective in preventing cyanobacterial proliferation or in terminating blooms. We consider EM products to be ineffective because they neither permanently bind nor remove phosphorus from eutroficated systems, they have no inhibiting effect on cyanobacteria, and they could even be an extra source of nutrients

Leadership in politics and science within the Antarctic Treaty

For over 50 years the Antarctic has been governed through the Antarctic Treaty, an international agreement now between 49 nations of whom 28 Consultative Parties (CPs) undertake the management role. Ostensibly, these Parties have qualified for their position on scientific grounds, though diplomacy also plays a major role. This paper uses counts of policy papers and science publications to assess the political and scientific outputs of all CPs over the last 18 years. We show that a subset of the original 12 Treaty signatories, consisting of the seven claimant nations, the USA and Russia, not only set the political agenda for the continent but also provide most of the science, with those CPs producing the most science generally having the greatest political influence. None of the later signatories to the Treaty appear to play a major role in managing Antarctica compared with this group, with half of all CPs collectively producing only 7% of the policy papers. Although acceptance as a CP requires demonstration of a substantial scientific programme, the Treaty has no formal mechanism to review whether a CP continues to meet this criterion. As a first step to addressing this deficiency, we encourage the CPs collectively to resolve to hold regular international peer reviews of their individual science programmes and to make the results available to the other CPs

Polyurea-Functionalized Multiwalled Carbon Nanotubes

An in situ polycondensation approach was applied to functionalize multiwalled carbon nanotubes (MWNTs), resulting in various linear or hyperbranched polycondensed polymers [e.g., polyureas, polyurethanes, and poly(urea-urethane)-bonded carbon nanotubes]. The quantity of the grafted polymer can be easily controlled by the feed ratio of monomers. As a typical example, the polyurea-functionalized MWNTs were measured and characterized in detail. The oxidized MWNTs (MWNT-COOH) were converted into acyl chloride-functionalized MWNTs (MWNT-COCl) by reaction with neat thionyl chloride (SOCl2). MWNT-COCl was reacted with excess 1,6-diaminohexane, affording amino-functionalized MWNTs (MWNT-NH2). In the presence of MWNT-NH2, the polyurea was covalently coated onto the surfaces of the nanotube by in situ polycondensation of diisocyanate [e.g., 4,4‘-methylenebis(phenylisocyanate)] and 1,6-diaminohexane, followed by the removal of free polymer via repeated filtering and solvent washing. The coated polyurea content can be controlled to some extent by adjusting the feed ratio of the isocyanato and amino groups. The structure and morphology of the resulting nanocomposites were characterized by FTIR, NMR, Raman, confocal Raman, TEM, EDS, and SEM measurements. The polyurea-coated MWNTs showed interesting self-assembled flat- or flowerlike morphologies in the solid state. The signals corresponding to that of the D and G bands of the carbon nanotubes were strongly attenuated after polyurea was chemically tethered to the MWNT surfaces. Comparative experiments showed that the grafted polymer species and structures have a strong effect on the Raman signals of polymer-functionalized MWNTs

Effect of Plasma Flux Composition on the Nitriding Rate of Stainless Steel

The total ion flux and nitriding rate for stainless steel specimens exposed to a modulated electron beam generated argon-nitrogen plasma were measured as a function of distance from the electron beam axis. The total ion flux decreased linearly with distance, but the nitriding rate increased under certain conditions, contrary to other ion flux/nitriding rate comparisons published in the literature. Variation in ion flux composition with distance was explored with a mass spectrometer and energy analyzer as a possible explanation for the anomalous nitriding rate response to ion flux magnitude. A transition in ion flux composition from mostly N2 1 to predominantly N1 ions with increasing distance was observed. Significant differences in molecular and atomic nitrogen ion energy distributions at a negatively biased electrode were also measured. An explanation for nitriding rate dependence based on flux composition and magnitude is proposed

The Soft-Excess in Mrk 509: Warm Corona or Relativistic Reflection?

We present the analysis of the first NuSTAR observations ($\sim 220$ ks), simultaneous with the last SUZAKU observations ($\sim 50$ ks), of the active galactic nucleus of the bright Seyfert 1 galaxy Mrk 509. The time-averaged spectrum in the $1-79$ keV X-ray band is dominated by a power-law continuum ($\Gamma\sim 1.8-1.9$), a strong soft excess around 1 keV, and signatures of X-ray reflection in the form of Fe K emission ($\sim 6.4$ keV), an Fe K absorption edge ($\sim 7.1$ keV), and a Compton hump due to electron scattering ($\sim 20-30$ keV). We show that these data can be described by two very different prescriptions for the soft excess: a warm ($kT\sim 0.5-1$ keV) and optically thick ($\tau\sim10-20$) Comptonizing corona, or a relativistically blurred ionized reflection spectrum from the inner regions of the accretion disk. While these two scenarios cannot be distinguished based on their fit statistics, we argue that the parameters required by the warm corona model are physically incompatible with the conditions of standard coronae. Detailed photoionization calculations show that even in the most favorable conditions, the warm corona should produce strong absorption in the observed spectrum. On the other hand, while the relativistic reflection model provides a satisfactory description of the data, it also requires extreme parameters, such as maximum black hole spin, a very low and compact hot corona, and a very high density for the inner accretion disk. Deeper observations of this source are thus necessary to confirm the presence of relativistic reflection, and to further understand the nature of its soft excess.Comment: Accepted for publication in ApJ, 18 pages, 7 figure

A probabilistic analysis of argument cogency

This paper offers a probabilistic treatment of the conditions for argument cogency as endorsed in informal logic: acceptability, relevance, and sufficiency. Treating a natural language argument as a reason-claim-complex, our analysis identifies content features of defeasible argument on which the RSA conditions depend, namely: change in the commitment to the reason, the reason’s sensitivity and selectivity to the claim, one’s prior commitment to the claim, and the contextually determined thresholds of acceptability for reasons and for claims. Results contrast with, and may indeed serve to correct, the informal understanding and applications of the RSA criteria concerning their conceptual dependence, their function as update-thresholds, and their status as obligatory rather than permissive norms, but also show how these formal and informal normative approachs can in fact align

Abrasive machining with MQSL

Grinding and polishing of engineered components are critical aspects of the precision manufacturing of high performance, quality assured products. Elevated process temperatures, however, are a common and for the most part undesirable feature of the grinding process. High process temperatures increase the likelihood of microstructural change within the immediate subsurface layer and are detrimental to the strength and performance of the manufactured products. Increasing processing costs and tighter environmental legislation are encouraging industry to seek innovative fluid application techniques as significant savings in production can be achieved. In this context, and with sponsorship from three industrial partners, namely; Fives Cinetic, Fuchs Lubricants plc and Southside Thermal Sciences Ltd, and also from the Engineering and Physical Science Research Council (EPSRC), this research aimed to develop an understanding of Minimum Quantity Solid Lubrication (MQSL) as a method for abrasive machining, with particular reference to the control of surface temperatures. Improving the lubricity of Minimum Quantity Lubrication (MQL) fluids reduces the frictional source of process heat and controls the finish surface temperature. The application of effective solid lubricants is known as Minimum Quantity Solid Lubrication (MQSL). Molybdenum Disulphide (MoS2), Calcium Fluoride (CaF2), and hexagonal Boron Nitride (hBN) were compared against a semi-synthetic water soluble machining fluid (Fuchs EcoCool). A series of Taguchi factorial experimental trials assessed their performances through ANOVA (ANalysis Of VAriance) statistical method. The hBN produced the lowest grinding temperatures of the solid lubricants tested, although they still remained higher than those achieved using the EcoCool control. The reduction of the machining fluid enabled a Charged Coupled Device (CCD) sensor to be fitted into the grinding machine. The recorded movement in the emitted spectrum from the grinding chips was compared to experimental and modelled process temperatures. This showed that the wavelengths of the chip light correlated to the temperature of the finish grinding surface. This greatly contributed to determining the feasibility of constructing a non-destructive, non-invasive, thermally-adaptive control system for controlling grinding surface temperatures.EThOS - Electronic Theses Online ServiceGBUnited Kingdo