NASTRAN solutions of problems described by simultaneous parabolic differential equations

NASTRAN solution techniques are shown for a numerical analysis of a class of coupled vector flow processes described by simultaneous parabolic differential equations. To define one physical problem type where equations of this form arise, the differential equations describing the coupled transfers of heat and mass in mechanical equilibrium with negligible mass average velocity are presented and discussed. Also shown are the equations describing seepage when both electrokinetic and hydrodynamic forces occur. Based on a variational statement of the general problem type, the concepts of scalar transfer elements and parallel element systems are introduced. It is shown that adoptation of these concepts allows the direct use of NASTRAN's existing Laplace type elements for uncoupled flow (the heat transfer elements) for treating multicomponent coupled transfer. Sample problems are included which demonstrate the application of these techniques for both steady-state and transient problems

Search Techniques for Multi-Objective Optimization of Mixed-Variable Systems Having Stochastic Responses

A method is proposed for solving stochastic multi-objective optimization problems. Such problems are typically encountered when one desires to optimize systems with multiple, often competing, objectives that do not have a closed form representation and must be estimated via simulation. A two-stage method is proposed that combines generalized pattern search/ranking and selection (GPS/R&S) and and Mesh Adaptive Direct Search (MADS) developed for single-objective stochastic problems with three multi-objective methods: interactive techniques for the specification of aspiration/reservation levels, scalarization functions, and multi-objective ranking and selection. This combination is devised specifically so as to keep the desirable convergence properties of GPS/R&S and MADS while extending application to the multi-objective case

Research related to improved computer aided design software package

The comparative computational efficiencies of the finite element (FEM), boundary element (BEM), and hybrid boundary element-finite element (HVFEM) analysis techniques are evaluated for representative bounded domain interior and unbounded domain exterior problems in elastostatics. Computational efficiency is carefully defined in this study as the computer time required to attain a specified level of solution accuracy. The study found the FEM superior to the BEM for the interior problem, while the reverse was true for the exterior problem. The hybrid analysis technique was found to be comparable or superior to both the FEM and BEM for both the interior and exterior problems

The effect of hydrogen on the deformation behavior of a single crystal nickel-base superalloy

The effect of hydrogen on the tensile deformation behavior of PWA 1480 is presented. Tensile tests were interrupted at different plastic strain levels to observe the development of the dislocation structure. Transmission electron microscopy (TEM) foils were cut perpendicular to the tensile axis to allow the deformation of both phases to be simultaneously observed as well as parallel to zone axes (III) to show the superdislocations on their slip planes. Similar to other nickel-base superalloys, hydrogen was detrimental to the room temperature tensile properties of PWA 1480. There was little effect on strength, however the material was severely embrittled. Even without hydrogen, the elongation-to-failure was only approximately 3 percent. The tensile fracture surface was made up primarily of ductile voids with regions of cleavage fracture. These cleavage facets are the eutectic (gamma') in the microstructure. It was shown by quantitative fractography that hydrogen embrittles the eutectic (gamma') and causes the crack path to seek out and fracture through the eutectic (gamma'). There was two to three times the amount of cleavage on the fracture surface of the hydrogen-charged samples than on the surface of the uncharged samples. The effect of hydrogen can also be seen in the dislocation structure. There is a marked tendency for dislocation trapping in the gamma matrix with and without hydrogen at all plastic strain levels. Without hydrogen there is a high dislocation density in the gamma matrix leading to strain exhaustion in this region and failure through the matrix. The dislocation structure at failure with hydrogen is slightly different. The TEM foils cut parallel to zone axes (III) showed dislocations wrapping around gamma precipitates. Zone axes (001) foils show that there is a lower dislocation density in the gamma matrix which can be linked to the effects of hydrogen on the fracture behavior. The primary activity in the gamma precipitates is in the form of superlattice intrinsic stacking faults (SISFs). These faults have also been reported in other ordered alloys and superalloys

Italy’s fragile new government is unlikely to stay for the long haul.

This week a new Italian government was finally sworn in and approved by Italy’s Parliament, following months of uncertainty after the country’s elections in February. James Walston assesses the new cabinet, noting that it is intentionally dominated by low profile figures to avoid antagonising the main participating parties. He argues that the government will be under immediate political pressure and could be further undermined by Silvio Berlusconi’s on-going legal battles

Rethinking Leadership: The Changing Role of Principal Supervisors

In the fall of 2012, the Council of the Great City Schools launched a two-part study of the ways principal supervisors are selected, supported, and evaluated in major school districts across the country. The first part involved a survey administered to district staff serving as principal supervisors in the fall of 2012. The second part of the study involved site visits to the six districts participating in The Wallace Foundation's Principal Pipeline Initiative -- Charlotte-Mecklenburg Schools, Denver Public Schools, Gwinnett County Public Schools, Hillsborough County Public Schools, the New York City Department of Education, and Prince George's County Public Schools. This report provides a summary of findings from both the survey and site visits. Part I presents a description of the organizational structure and general features of the various principal supervisory systems, including the roles, selection, deployment, staffing, professional development, and evaluation of principal supervisors, as well as the preparation, selection, support, and evaluation of principals. Part II provides recommendations for building more effective principal supervisory systems. Based on the survey results and observations from the site visits, these recommendations identify those structures and practices that are most likely to result in stronger school leaders and higher student achievement

Effect of hydrogen on deformation structure and properties of CMSX-2 nickel-base single-crystal superalloy

Material used in this study was a heat of the alloy CMSX-2. This nickel-based superalloy was provided in the form of oriented single crystals, solutionized for 3 hrs at 1315 C. It was then usually heat treated as follows: 1050 C/16h/air cool + 850 C/48h/air cool. The resulting microstructure is dominated by cuboidal, ordered gamma precipitates with a volume fraction of about 75% and an average size of 0.5 microns. In brief, the most compelling hydrogen induced-changes in deformation structure are: (1) enhanced dislocation accumulation in the gamma matrix; and (2) more extensive cross-slip of superdislocations in the gamma precipitates. The enhanced dislocation density in gamma acts to decrease the mean free path of a superdislocation, while easier cross slip hinders superdislocation movement by providing pinning points in the form of sessile jobs. Both processes contribute to the increase of flow stress and the notable work hardening that occurs prior to fracture