Ionising radiation metrology for the metallurgical industry

Every year millions tons of steel are produced worldwide from recycled scrap loads. Although the detection systems in the steelworks prevent most orphan radioactive sources from entering the furnace, there is still the possibility of accidentally melting a radioactive source. The MetroMetal project, carried out in the frame of the European Metrology Research Programme (EMRP), addresses this problem by studying the existing measurement systems, developing sets of reference sources in various matrices (cast steel, slag, fume dust) and proposing new detection instruments. This paper presents the key lines of the project and describes the preparation of radioactive sources as well as the intercomparison exercises used to test the calibration and correction methods proposed within the project.JRC.D.4-Standards for Nuclear Safety, Security and Safeguard

The certification of the activity concentration of the radionuclides 137Cs, 90Sr and 40K in wild berries: IRMM-426

This report describes the production of CRM IRMM-426, a dried bilberry material certified for the radionuclide activity concentrations of 137Cs, 90Sr and 40K. The material was produced following ISO Guide 34:2009. Bilberry samples were collected in a woodland region of so-called “strontium hot spots” close to the Chernobyl reactor site. The samples were air-dried at the sampling site before transport to IRMM, where the raw material was oven-dried, cryo-milled, sieved, homogenised and bottled. The bottled material was sterilised by gamma-irradiation. Between-unit homogeneity was quantified and stability during dispatch and storage were assessed in accordance with ISO Guide 35:2006. The material was characterised by an intercomparison among laboratories of demonstrated competence and adhering to ISO/IEC 17025. Technically invalid results were removed but no outlier was eliminated on statistical grounds only. Uncertainties of the certified values were calculated in compliance with the Guide to the Expression of Uncertainty in Measurement (GUM) and include uncertainties related to possible inhomogeneity and instability and to characterisation. The material is intended for the assessment of method performance and quality control. As any reference material, it can also be used for control charts or validation studies. The CRM is available in amber glass jars containing about 100 g of dried bilberry powder. The minimum amount of sample to be used for analysis is 50 g for 90Sr and 18 g for 137Cs and 40K.JRC.D.2-Standards for Innovation and sustainable Developmen

The Hordaland Women's Cohort: A prospective cohort study of incontinence, other urinary tract symptoms and related health issues in middle-aged women

<p>Abstract</p> <p>Background</p> <p>Urinary incontinence (UI) is a prevalent symptom in middle-aged women, but data on incidence is limited and rarely reported. In order to analyze incidence, remission, or development patterns of severity and types of UI, we have established a 15-year prospective cohort (1997–2012).</p> <p>Methods</p> <p>The Cohort is based on the national collection of health data gathered from county studies (CONOR). Hordaland Health Study (HUSK) is one of them from Hordaland County. Each of the county studies may have local sub-studies and our Cohort is one of them. The Cohort included women aged 40–45 in order to have a broad approach to women's health including UI and other lower urinary tract symptoms (LUTS). A onefifth random sampling from HUSK was used to create the Cohort in 1997–1999. For the necessary sample size a preliminary power calculation, based on a 70% response rate at inclusion and 5% annual attrition rates was used. The Cohort is planned to collect data through questionnaires every second year for the 15-year period from 1997–2012.</p> <p>Discussion</p> <p>The Cohort represents a relatively large random sample (N = 2,230) of about 15% of the total population of women born between 1953–57 in the county of Hordaland. Our data shows that the cohort population is very similar to the source population. The baseline demographic, social and medical characteristics of the Cohort are compared with the rest of women in HUSK (N = 7,746) and there were no significant differences between them except for the level of education (P = 0.001) and yearly income (P = 0.018), which were higher in the Cohort population. Urological characteristics of participants from the Cohort (N = 1,920) were also compared with the other participants (N = 3,400). There were no significant statistical differences except for somewhat more urinary continence (P = 0.04), more stress incontinence (P = 0.048) and smaller amount of leakage (P = 0.015) in the Cohort. In conclusion, the Cohort ispopulation-based, with little selection bias, and thus is a rather unique study forinvestigating UI and LUTS in comparison with many other projects with similar purposes.</p

Ethics, economics and the regulation and adoption of new medical devices: case studies in pelvic floor surgery

<p>Abstract</p> <p>Background</p> <p>Concern has been growing in the academic literature and popular media about the licensing, introduction and adoption of surgical devices before full effectiveness and safety evidence is available to inform clinical practice. Our research will seek empirical survey evidence about the roles, responsibilities, and information and policy needs of the key stakeholders in the introduction into clinical practice of new surgical devices for pelvic floor surgery, in terms of the underlying ethical principals involved in the economic decision-making process, using the example of pelvic floor procedures.</p> <p>Methods/Design</p> <p>Our study involves three linked case studies using, as examples, selected pelvic floor surgery devices representing Health Canada device safety risk classes: low, medium and high risk. Data collection will focus on stakeholder roles and responsibilities, information and policy needs, and perceptions of those of other key stakeholders, in seeking and using evidence about new surgical devices when licensing and adopting them into practice. For each class of device, interviews will be used to seek the opinions of stakeholders. The following stakeholders and ethical and economic principles provide the theoretical framework for the study:</p> <p indent="1"><b>Stakeholders </b>- federal regulatory body, device manufacturers, clinicians, patients, health care institutions, provincial health departments, and professional societies. Clinical settings in two centres (in different provinces) will be included.</p> <p indent="1"><b>Ethics </b>- beneficence, non-maleficence, autonomy, justice.</p> <p indent="1"><b>Economics </b>- scarcity of resources, choices, opportunity costs.</p> <p>For each class of device, responses will be analysed to compare and contrast between stakeholders. Applied ethics and economic theory, analysis and critical interpretation will be used to further illuminate the case study material.</p> <p>Discussion</p> <p>The significance of our research in this new area of ethics will lie in providing recommendations for regulatory bodies, device manufacturers, clinicians, health care institutions, policy makers and professional societies, to ensure surgical patients receive sufficient information before providing consent for pelvic floor surgery. In addition, we shall provide a wealth of information for future study in other areas of surgery and clinical management, and provide suggestions for changes to health policy.</p

Technological literacy reconsidered: a model for enactment

The final publication is available at: http://link.springer.com/article/10.1007%2Fs10798-009-9108-6.This paper presents a model to describe technological literacy as enacted by individuals in the course of shaping their lives and the world around them. The model has two interrelated facets – the potential for and enactment of technological literacy – where enactment and potential mutually constitute each other. This potential is made up of knowledge of a particular situation, personal engagement with a situation, and social engagement in the world. Enactment requires a particular set of competencies in action, which together helps shape the situation: recognizing needs; articulating problems; contributing towards the technological process; and analysing consequences. The implications of this model for technological literacy in the context of the individual and society, and the role of technology education in developing technological literacy, are discussed

An instrument to determine the technological literacy levels of upper secondary school students

In this article, an instrument for assessing upper secondary school students’ levels of technological literacy is presented. The items making up the instrument emerged from a previous study that employed a phenomenographic research approach to explore students’ conceptions of technology in terms of their understanding of the nature of technology and their interaction with technological artefacts. The instrument was validated through administration to 1,245 students on completion of their 12 years of formal schooling. A factor analysis was conducted on the data and Cronbach alpha reliability coefficients determined. The results show that a five-dimension factor structure (namely, artefact, process, direction/instruction, tinkering, and engagement) strongly supported the dimensions as developed during the original phenomenographic study. The Cronbach alpha reliability co-efficient of each dimension was satisfactory. Based on these findings, the instrument has been shown to be valid and reliable and can be used with confidence

Preface to ICRM2011 - Proceedings of the 18th International Conference on Radionuclide Metrology and its Applications

This preface to the Proceedings volume summarizes the objectives and outcomes of the conference ICRM 2011, and gives additional information on the working of the International Committee for Radionuclide Metrology.JRC.D.4-Standards for Nuclear Safety, Security and Safeguard

Qualification of a precision pattern dispenser

In order to automate sample preparation processes, a precision pattern dispenser was designed to reproducibly dispense radioactive solutions at pre-defined positions. It is composed of an automatic liquid sample handling unit coupled to an XYZ table. Qualification tests were conducted to evaluate the performance of the instrument and to assess the compliance with the requirements, in particular trueness (< 2%) and repeatability (< 1%). The instrument allows preparing sources in different source holders and on air filters, in a fast and accurate way.JRC.G.2-Standards for Nuclear Safety, Security and Safeguard