POMIAR STRUMIENIA MIESZANINY GAZ-CIECZ Z WYKORZYSTANIEM KRYZY STANDARDOWEJ I KRYZY SZCZELINOWEJ

The differential pressure of gas measurement is very often used in industrial measurements. During the gas flow, liquid condensation often occurs. The result is that when measuring a gas flow, the gas-liquid mixture is essentially measured. Errors in the indications of measuring instruments are starting to appear due to a change in the properties of the continuous phase, which is gas. In addition, the appearance of liquid droplets leads to flow disturbances and pressure pulsations. Therefore, new methods and tools for measuring the flow of gas-liquid mixture are being sought. The work involves the use of slotted orifices for measuring gas-liquid mixtures. An analysis of the influence of the slotted orifice geometry on the measurement of the biphasic mixture stream was carried out. Standard orifice and three slotted orifices of various designs. The experiment included measuring the air flow with a small amount of water dispersed in the form of drops.Pomiar gazu metodą zwężkową jest bardzo często stosowany w pomiarach przemysłowych. Podczas przepływu gazu bardzo często dochodzi do wykroplenia się cieczy. Powoduje to, że mierząc przepływ gazu w zasadzie mierzy się mieszaninę gaz – ciecz. Zaczynają pojawiać się błędy wskazań przyrządów pomiarowych wynikających ze zmiany właściwości fazy ciągłej, którą jest gaz. Dodatkowo pojawienie się kropel cieczy prowadzi do powstawania zaburzeń przepływu i pulsacji ciśnienia. W związku z tym  poszukuje się nowych metod i narzędzi do pomiaru przepływu mieszaniny gaz-ciecz. Praca obejmuje zastosowanie kryz szczelinowych do pomiaru mieszanin gaz-ciecz. Przeprowadzono analizę wpływu geometrii kryzy szczelinowej na pomiar strumienia mieszaniny dwufazowej. Badaniom kryzę standardową oraz trzy kryzy szczelinowe o różnych konstrukcjach. Eksperyment obejmował pomiar przepływu powietrza z niewielką ilością wody rozproszonej w postaci kropel

Dissimilarity of the gut-lung axis and dysbiosis of the lower airways in ventilated preterm infants.

BACKGROUND: Chronic lung disease of prematurity (CLD), also called bronchopulmonary dysplasia, is a major consequence of preterm birth but the role of the microbiome in its development remains unclear. We, therefore, assessed the progression of the bacterial community in ventilated preterm infants over time in the upper and lower airways, and assessed the gut-lung axis by comparing the upper and lower airways bacterial communities with the stool findings. Finally, we assessed if the bacterial communities were associated with lung inflammation to suggest dysbiosis. METHODS: We serially sampled multiple anatomical sites including the upper airway (nasopharyngeal aspirates, NPA), lower airways (tracheal aspirate fluid, TAF, and bronchoalveolar lavage fluid, BAL) and the gut (stool) of ventilated preterm-born infants. Bacterial DNA load was measured in all samples and sequenced using the V3-V4 region of the 16S rRNA gene RESULTS: From 1102 (539 NPA, 276 TAF, 89 BAL, 198 stool) samples from 55 preterm infants, 352 (32%) amplified suitably for 16 s RNA gene sequencing. Bacterial load was low at birth, quickly increased with time but was associated with predominant operational taxonomic units (OTUs) in all sample types. There was dissimilarity in bacterial communities between the upper and lower airways and the gut with a separate dysbiotic inflammatory process occurring in the lower airways of infants. Individual OTUs were associated with increased inflammatory markers. CONCLUSIONS: Taken together, these findings suggest that targeted treatment of the predominant organisms, including those not routinely treated such as Ureaplasma spp., may decrease the development of CLD in preterm-born infants

A multichannel magnetic probe system for analysing magnetic fluctuations in helical axis plasmas

The need to understand the structure of magnetic fluctuations in H-1NF heliac [S. Hamberger et al., Fusion Technol. 17, 123 (1990)] plasmas has motivated the installation of a sixteen former, tri-axis helical magnetic probe Mirnov array (HMA). The new array complements two existing poloidal Mirnov arrays by providing polarisation information, higher frequency response, and improved toroidal resolution. The helical placement is ideal for helical axis plasmas because it positions the array as close as possible to the plasma in regions of varying degrees of favourable curvature in the magnetohydrodynamic sense, but almost constant magnetic angle. This makes phase variation with probe position near linear, greatly simplifying the analysis of the data. Several of the issues involved in the design, installation, data analysis, and calibration of this unique array are presented including probe coil design, frequency response measurements, mode number identification, orientation calculations, and mapping probe coil positions to magnetic coordinates. Details of specially designed digitally programmable pre-amplifiers, which allow gains and filters to be changed as part of the data acquisition initialisation sequence and stored with the probe signals, are also presented. The low shear heliac geometry [R. Jiménez-Gómez et al., Nucl. Fusion 51, 033001 (2011)], flexibility of the H-1NF heliac, and wealth of information provided by the HMA create a unique opportunity for detailed study of Alfvén eigenmodes, which could be a serious issue for future fusion reactors.This work was supported by the Education Investment Fund under the Super Science Initiative of the Australian Government. S.R.H. wishes to thank AINSE Ltd. for providing financial assistance to enable this work on H-1NF to be conducted

Carbon nanoparticles fabricated by infrared laser ablation of graphite and polycrystalline diamond targets

This paper presents the results of carbon nanoparticles (CNPs) production by infrared laser ablation of a graphite or a polycrystalline diamond target, submerged in one of two solvents, water or isopropanol. The targets were irradiated using a SPI fibre laser with a wavelength of 1064nm being operated at different average powers. After laser-assisted synthesis of CNPs, the resulting colloids, i.e particles in a liquid medium, were examined using the analytical techniques of dynamic light scattering, UV-Vis, Raman spectroscopy and fluorescence spectroscopy. The results show that the properties of CNPs strongly depend on processing conditions of the liquid phase-pulsed laser ablation (LP-PLA) process. In particular, the size of nanoparticles produced are affected by the processing parameters of the laser ablation. The results show that the laser processing of a graphite target in deionised water and in isopropanol produces carbon nanoparticles with properties that are beneficial for various biochemical and biomedical applications. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinhei

The mating-specific Gα interacts with a kinesin-14 and regulates pheromone-induced nuclear migration in budding yeast

As a budding yeast cell elongates toward its mating partner, cytoplasmic microtubules connect the nucleus to the cell cortex at the growth tip. The Kar3 kinesin-like motor protein is then thought to stimulate plus-end depolymerization of these microtubules, thus drawing the nucleus closer to the site where cell fusion and karyogamy will occur. Here, we show that pheromone stimulates a microtubule-independent interaction between Kar3 and the mating-specific Gα protein Gpa1 and that Gpa1 affects both microtubule orientation and cortical contact. The membrane localization of Gpa1 was found to polarize early in the mating response, at about the same time that the microtubules begin to attach to the incipient growth site. In the absence of Gpa1, microtubules lose contact with the cortex upon shrinking and Kar3 is improperly localized, suggesting that Gpa1 is a cortical anchor for Kar3. We infer that Gpa1 serves as a positional determinant for Kar3-bound microtubule plus ends during mating. © 2009 by The American Society for Cell Biology