2,214 research outputs found

    Rough surface reconstruction of real surfaces for numerical simulations of ultrasonic wave scattering

    Get PDF
    The scattering of waves by rough surfaces plays a significant role in many fields of physical sciences including ultrasonics where failure surfaces are often rough and their accurate identification is critical. The prediction of the strength of scattering can be hampered when the roughness is not adequately characterised and this is a particular issue when the surface roughness is within an order of the incident wavelength. Here we develop a methodology to reconstruct, and accurately represent, rough surfaces using an AutoRegressive (AR) process that then allows for rapid numerical simulations of ultrasonic wave rough surface scattering in three dimensions. Gaussian, exponential and AR surfaces are reconstructed based on real surface data and the statistics of the surfaces are compared with each other. The statistics from the AR surfaces agree well with those from actual rough surfaces, taken from experimental samples, in terms of the heights as well as the gradients, which are the two main factors in accurately predicting the wave scattering intensities. Ultrasonic rough surface scattering is simulated numerically using the Kirchhoff approximation, and comparisons with Gaussian, exponential, AR and real sample surfaces are performed; scattering intensities found using AR surfaces show the best agreement with the real sample surfaces

    Determinant representations of scalar products for the open XXZ chain with non-diagonal boundary terms

    Full text link
    With the help of the F-basis provided by the Drinfeld twist or factorizing F-matrix for the open XXZ spin chain with non-diagonal boundary terms, we obtain the determinant representations of the scalar products of Bethe states of the model.Comment: Latex file, 28 pages, based on the talk given by W. -L. Yang at Statphys 24, Cairns, Australia, 19-23 July, 201

    Hypoglycemia and Death in Mice Following Experimental Exposure to an Extract of Trogia venenata Mushrooms

    Get PDF
    BACKGROUND: Clusters of sudden unexplained death (SUD) in Yunnan Province, China, have been linked to eating Trogia venenata mushrooms. We evaluated the toxic effect of this mushroom on mice. METHODS: We prepared extracts of fresh T. venenata and Laccaria vinaceoavellanea mushrooms collected from the environs of a village that had SUD. We randomly allocated mice into treatment groups and administered mushroom extracts at doses ranging from 500 to 3500 mg/kg and water (control) via a gavage needle. We observed mice for mortality for 7 days after a 3500 mg/kg dose and for 24 hours after doses from 500 to 3000 mg/kg. We determined biochemical markers from serum two hours after a 2000 mg/kg dose. RESULTS: Ten mice fed T. venenata extract (3500 mg/kg) died by five hours whereas all control mice (L. vinaceoavellanea extract and water) survived the seven-day observation period. All mice died by five hours after exposure to single doses of T. venenata extract ranging from 1500 to 3000 mg/kg, while the four mice exposed to a 500 mg/kg dose all survived. Mice fed 2000 mg/kg of T. venenata extract developed profound hypoglycemia (median= 0.66 mmol/L) two hours after exposure. DISCUSSION: Hypoglycemia and death within hours of exposure, a pattern unique among mushroom toxicity, characterize T. venenata poisoning

    SN 2005hj: Evidence for Two Classes of Normal-Bright SNe Ia and Implications for Cosmology

    Get PDF
    HET Optical spectra covering the evolution from about 6 days before to about 5 weeks after maximum light and the ROTSE-IIIb unfiltered light curve of the "Branch-normal" Type Ia Supernova SN 2005hj are presented. The host galaxy shows HII region lines at redshift of z=0.0574, which puts the peak unfiltered absolute magnitude at a somewhat over-luminous -19.6. The spectra show weak and narrow SiII lines, and for a period of at least 10 days beginning around maximum light these profiles do not change in width or depth and they indicate a constant expansion velocity of ~10,600 km/s. We analyzed the observations based on detailed radiation dynamical models in the literature. Whereas delayed detonation and deflagration models have been used to explain the majority of SNe Ia, they do not predict a long velocity plateau in the SiII minimum with an unvarying line profile. Pulsating delayed detonations and merger scenarios form shell-like density structures with properties mostly related to the mass of the shell, M_shell, and we discuss how these models may explain the observed SiII line evolution; however, these models are based on spherical calculations and other possibilities may exist. SN 2005hj is consistent with respect to the onset, duration, and velocity of the plateau, the peak luminosity and, within the uncertainties, with the intrinsic colors for models with M_shell=0.2 M_sun. Our analysis suggests a distinct class of events hidden within the Branch-normal SNe Ia. If the predicted relations between observables are confirmed, they may provide a way to separate these two groups. We discuss the implications of two distinct progenitor classes on cosmological studies employing SNe Ia, including possible differences in the peak luminosity to light curve width relation.Comment: ApJ accepted, 31 page

    Hepatocyte-intrinsic SMN deficiency drives metabolic dysfunction and liver steatosis in spinal muscular atrophy

    Get PDF
    This work was supported by an Agency for Science, Technology and Research (A*STAR) CDF grant number C210112024 (to CJJY). Acknowledgments to Dave Wee, Edward Manser, Frederick Bard, and Uttam Surana from A*STAR for scientific discussions and to Shaye Moore from Boston Children’s Hospital for assistance with editing and submission.Peer reviewe

    Experimentally Guided Computational Model Discovers Important Elements for Social Behavior in Myxobacteria

    Get PDF
    Identifying essential factors in cellular interactions and organized movement of cells is important in predicting behavioral phenotypes exhibited by many bacterial cells. We chose to study Myxococcus xanthus, a soil bacterium whose individual cell behavior changes while in groups, leading to spontaneous formation of aggregation center during the early stage of fruiting body development. In this paper, we develop a cell-based computational model that solely relies on experimentally determined parameters to investigate minimal elements required to produce the observed social behaviors in M. xanthus. The model verifies previously known essential parameters and identifies one novel parameter, the active turning, which we define as the ability and tendency of a cell to turn to a certain angle without the presence of any obvious external factors. The simulation is able to produce both gliding pattern and spontaneous aggregation center formation as observed in experiments. The model is tested against several known M. xanthus mutants and our modification of parameter values relevant for the individual mutants produces good phenotypic agreements. This outcome indicates the strong predictive potential of our model for the social behaviors of uncharacterized mutants and their expected phenotypes during development

    A direct physical interaction between Nanog and Sox2 regulates embryonic stem cell self-renewal

    Get PDF
    Embryonic stem (ES) cell self-renewal efficiency is determined by the Nanog protein level. However, the protein partners of Nanog that function to direct self-renewal are unclear. Here, we identify a Nanog interactome of over 130 proteins including transcription factors, chromatin modifying complexes, phosphorylation and ubiquitination enzymes, basal transcriptional machinery members, and RNA processing factors. Sox2 was identified as a robust interacting partner of Nanog. The purified Nanog–Sox2 complex identified a DNA recognition sequence present in multiple overlapping Nanog/Sox2 ChIP-Seq data sets. The Nanog tryptophan repeat region is necessary and sufficient for interaction with Sox2, with tryptophan residues required. In Sox2, tyrosine to alanine mutations within a triple-repeat motif (S X T/S Y) abrogates the Nanog–Sox2 interaction, alters expression of genes associated with the Nanog-Sox2 cognate sequence, and reduces the ability of Sox2 to rescue ES cell differentiation induced by endogenous Sox2 deletion. Substitution of the tyrosines with phenylalanine rescues both the Sox2–Nanog interaction and efficient self-renewal. These results suggest that aromatic stacking of Nanog tryptophans and Sox2 tyrosines mediates an interaction central to ES cell self-renewal

    Molecular Dynamics Simulations Suggest Ligand’s Binding to Nicotinamidase/Pyrazinamidase

    Get PDF
    The research on the binding process of ligand to pyrazinamidase (PncA) is crucial for elucidating the inherent relationship between resistance of Mycobacterium tuberculosis and PncA’s activity. In the present study, molecular dynamics (MD) simulation methods were performed to investigate the unbinding process of nicotinamide (NAM) from two PncA enzymes, which is the reverse of the corresponding binding process. The calculated potential of mean force (PMF) based on the steered molecular dynamics (SMD) simulations sheds light on an optimal binding/unbinding pathway of the ligand. The comparative analyses between two PncAs clearly exhibit the consistency of the binding/unbinding pathway in the two enzymes, implying the universality of the pathway in all kinds of PncAs. Several important residues dominating the pathway were also determined by the calculation of interaction energies. The structural change of the proteins induced by NAM’s unbinding or binding shows the great extent interior motion in some homologous region adjacent to the active sites of the two PncAs. The structure comparison substantiates that this region should be very important for the ligand’s binding in all PncAs. Additionally, MD simulations also show that the coordination position of the ligand is displaced by one water molecule in the unliganded enzymes. These results could provide the more penetrating understanding of drug resistance of M. tuberculosis and be helpful for the development of new antituberculosis drugs

    Controllable Synthesis of Magnesium Oxysulfate Nanowires with Different Morphologies

    Get PDF
    One-dimensional magnesium oxysulfate 5Mg(OH)2 · MgSO4 · 3H2O (abbreviated as 513MOS) with high aspect ratio has attracted much attention because of its distinctive properties from those of the conventional bulk materials. 513MOS nanowires with different morphologies were formed by varying the mixing ways of MgSO4 · 7H2O and NH4OH solutions at room temperature followed by hydrothermal treatment of the slurries at 150 °C for 12 h with or without EDTA. 513MOS nanowires with a length of 20–60 μm and a diameter of 60–300 nm were prepared in the case of double injection (adding MgSO4 · 7H2O and NH4OH solutions simultaneously into water), compared with the 513MOS with a length of 20–30 μm and a diameter of 0.3–1.7 μm in the case of the single injection (adding MgSO4 · 7H2O solution into NH4OH solution). The presence of minor amount of EDTA in the single injection method led to the formation of 513MOS nanowires with a length of 100–200 μm, a diameter of 80–200 nm, and an aspect ratio of up to 1000. The analysis of the experimental results indicated that the hydrothermal solutions with a lower supersaturation were favorable for the preferential growth of 513MOS nanowires along b axis
    corecore