Carrier Concentration Dependencies of Magnetization & Transport in Ga1-xMnxAs1-yTey

We have investigated the transport and magnetization characteristics of Ga1-xMnxAs intentionally compensated with shallow Te donors. Using ion implantation followed by pulsed-laser melting, we vary the Te compensation and drive the system through a metal-insulator transition (MIT). This MIT is associated with enhanced low-temperature magnetization and an evolution from concave to convex temperature-dependent magnetization.Comment: 2 pages, 2 figures. To appear in the proceedings of the 27th International Conference on the Physics of Semiconductors (ICPS-27, Flagstaff, AZ, July 26-30, 2004

Carrier dynamics and coherent acoustic phonons in nitride heterostructures

We model generation and propagation of coherent acoustic phonons in piezoelectric InGaN/GaN multi-quantum wells embedded in a \textit{pin} diode structure and compute the time resolved reflectivity signal in simulated pump-probe experiments. Carriers are created in the InGaN wells by ultrafast pumping below the GaN band gap and the dynamics of the photoexcited carriers is treated in a Boltzmann equation framework. Coherent acoustic phonons are generated in the quantum well via both deformation potential electron-phonon and piezoelectric electron-phonon interaction with photogenerated carriers, with the latter mechanism being the dominant one. Coherent longitudinal acoustic phonons propagate into the structure at the sound speed modifying the optical properties and giving rise to a giant oscillatory differential reflectivity signal. We demonstrate that coherent optical control of the differential reflectivity can be achieved using a delayed control pulse.Comment: 14 pages, 11 figure

Formation of diluted III–V nitride thin films by N ion implantation

iluted III–Nₓ–V₁ˍₓ alloys were successfully synthesized by nitrogen implantation into GaAs,InP, and AlyGa1−yAs. In all three cases the fundamental band-gap energy for the ion beam synthesized III–Nₓ–V₁ˍₓ alloys was found to decrease with increasing N implantation dose in a manner similar to that observed in epitaxially grownGaNₓAs1−x and InNₓP₁ˍₓalloys. In GaNₓAs₁ˍₓ the highest value of x (fraction of “active” substitutional N on As sublattice) achieved was 0.006. It was observed that NAs is thermally unstable at temperatures higher than 850 °C. The highest value of x achieved in InNₓP₁ˍₓ was higher, 0.012, and the NP was found to be stable to at least 850 °C. In addition, the N activation efficiency in implantedInNₓP₁ˍₓ was at least a factor of 2 higher than that in GaNₓAs₁ˍₓ under similar processing conditions. AlyGa1−yNₓAs₁ˍₓ had not been made previously by epitaxial techniques. N implantation was successful in producing AlyGa1−yNₓAs₁ˍₓalloys. Notably, the band gap of these alloys remains direct, even above the value of y (y>0.44) where the band gap of the host material is indirect.This work was supported by the ‘‘Photovoltaic Materials Focus Area’’ in the DOE Center of Excellence for the Synthesis and Processing of Advanced Materials, Office of Science, Office of Basic Energy Sciences, Division of Materials Sciences under U.S. Department of Energy Contract No. DE-ACO3-76SF00098. The work at UCSD was partially supported by Midwest Research Institute under subcontractor No. AAD-9-18668-7 from NREL

Effect of Native Defects on Optical Properties of InxGa1-xN Alloys

The energy position of the optical absorption edge and the free carrier populations in InxGa1-xN ternary alloys can be controlled using high energy 4He+ irradiation. The blue shift of the absorption edge after irradiation in In-rich material (x > 0.34) is attributed to the band-filling effect (Burstein-Moss shift) due to the native donors introduced by the irradiation. In Ga-rich material, optical absorption measurements show that the irradiation-introduced native defects are inside the bandgap, where they are incorporated as acceptors. The observed irradiation-produced changes in the optical absorption edge and the carrier populations in InxGa1-xN are in excellent agreement with the predictions of the amphoteric defect model

Structural and Electronic Properties of Amorphous and Polycrystalline In2Se3 Films

Structural and electronic properties of amorphous and single-phase polycrystalline films of gamma- and kappa-In2Se3 have been measured. The stable gamma phase nucleates homogeneously in the film bulk and has a high resistivity, while the metastable kappa phase nucleates at the film surface and has a moderate resistivity. The microstructures of hot-deposited and post-annealed cold-deposited gamma films are quite different but the electronic properties are similar. The increase in the resistivity of amorphous In2Se3 films upon annealing is interpreted in terms of the replacement of In-In bonds with In-Se bonds during crystallization. Great care must be taken in the preparation of In2Se3 films for electrical measurements as the presence of excess chalcogen or surface oxidation may greatly affect the film properties.Comment: 23 pages and 12 figure

Fabrication and Characterization of Multiband Solar Cells Based on Highly Mismatched Alloys

Multiband solar cells are one type of third generation photovoltaic devices in which an increase of the power conversion efficiency is achieved through the absorption of low energy photons while preserving a large band gap that determines the open circuit voltage. The ability to absorb photons from different parts of the solar spectrum originates from the presence of an intermediate energy band located within the band gap of the material. This intermediate band, acting as a stepping stone allows the absorption of low energy photons to transfer electrons from the valence band to the conduction band by a sequential two photons absorption process. It has been demonstrated that highly mismatched alloys offer a potential to be used as a model material system for practical realization of multiband solar cells. Dilute nitride GaAs1-xNx highly mismatched alloy with low mole fraction of N is a prototypical multiband semiconductor with a well-defined intermediate band. Currently, we are using chemical beam epitaxy to synthesize dilute nitride highly mismatched alloys. The materials are characterized by a variety of structural and optical methods to optimize their properties for multiband photovoltaic devices

Compensating point defects in 4He+ -irradiated InN

We use positron annihilation spectroscopy to study 2 MeV 4He+ -irradiated InN grown by molecular-beam epitaxy and GaN grown by metal-organic chemical-vapor deposition. In GaN, the Ga vacancies act as important compensating centers in the irradiated material, introduced at a rate of 3600 cm exp −1. The In vacancies are introduced at a significantly lower rate of 100cm−1, making them negligible in the compensation of the irradiation-induced additional n-type conductivity in InN. On the other hand, negative non-open volume defects are introduced at a rate higher than 2000cm exp −1. These defects are tentatively attributed to interstitial nitrogen and may ultimately limit the free-electron concentration at high irradiation fluences.Peer reviewe