1,120 research outputs found
Support immersion endoscopy in post-extraction alveolar bone chambers: a new window for microscopic bone imaging in Vivo
Using an endoscopic approach, small intraoral bone chambers, which are routinely obtained during tooth extraction and implantation, provide visual in vivo access to internal bone structures. The aim of the present paper is to present a new method to quantify bone microstructure and vascularisation in vivo. Ten extraction sockets and 6 implant sites in 14 patients (6 men / 8 women) were examined by support immersion endoscopy (SIE). After tooth extraction or implant site preparation, microscopic bone analysis (MBA) was performed using short distance SIE video sequences of representative bone areas for off-line analysis with ImageJ. Quantitative assessment of the microstructure and vascularisation of the bone in dental extraction and implant sites in vivo was performed using ImageJ. MBA revealed bone morphology details such as unmineralised and mineralised areas, vascular canals and the presence of bleeding through vascular canals. Morphometric examination revealed that there was more unmineralised bone and less vascular canal area in the implant sites than in the extraction sockets
Intra-oral compartment pressures: a biofunctional model and experimental measurements under different conditions of posture
Oral posture is considered to have a major influence on the development and reoccurrence of malocclusion. A biofunctional model was tested with the null hypotheses that (1) there are no significant differences between pressures during different oral functions and (2) between pressure measurements in different oral compartments in order to substantiate various postural conditions at rest by intra-oral pressure dynamics. Atmospheric pressure monitoring was simultaneously carried out with a digital manometer in the vestibular inter-occlusal space (IOS) and at the palatal vault (sub-palatal space, SPS). Twenty subjects with normal occlusion were evaluated during the open-mouth condition (OC), gently closed lips (semi-open compartment condition, SC), with closed compartments after the generation of a negative pressure (CCN) and swallowing (SW). Pressure curve characteristics were compared between the different measurement phases (OC, SC, CCN, SW) as well as between the two compartments (IOS, SPS) using analysis of variance and Wilcoxon matched-pairs tests adopting a significance level of αâ=â0.05. Both null hypotheses were rejected. Average pressures (IOS, SPS) in the experimental phases were 0.0, â0.08 (OC); â0.16, â1.0 (SC); â48.79, â81.86 (CCN); and â29.25, â62.51 (SW)âmbar. CCN plateau and peak characteristics significantly differed between the two compartments SPS and IOS. These results indicate the formation of two different intra-oral functional anatomical compartments which provide a deeper understanding of orofacial biofunctions and explain previous observations of negative intra-oral pressures at rest
Ab-Initio Calculation of the Metal-Insulator Transition in Sodium rings and chains and in mixed Sodium-Lithium systems
We study how the Mott metal-insulator transition (MIT) is influenced when we
deal with electrons with different angular momenta. For lithium we found an
essential effect when we include -orbitals in the description of the Hilbert
space. We apply quantum-chemical methods to sodium rings and chains in order to
investigate the analogue of a MIT, and how it is influenced by periodic and
open boundaries. By changing the interatomic distance we analyse the character
of the many-body wavefunction and the charge gap. In the second part we mimic a
behaviour found in the ionic Hubbard model, where a transition from a band to a
Mott insulator occurs. For that purpose we perform calculations for mixed
sodium-lithium rings. In addition, we examine the question of bond alternation
for the pure sodium system and the mixed sodium-lithium system, in order to
determine under which conditions a Peierls distortion occurs.Comment: 8 pages, 7 figures, accepted Eur. J. Phys.
Thermophysical properties of a low-density phenolic-nylon ablation material
Thermophysical properties of nondegradated and thermally degradated low density phenolic-nylon ablating materia
Collaborative virtual reality platform for visualizing space data and mission planning
This paper presents the system architecture of a collaborative virtual environment in which distributed multidisciplinary teams involved in space exploration activities come together and explore areas of scientific interest of a planet for future missions. The aim is to reduce the current challenges of distributed scientific and engineering meetings that prevent the exploitation of
their collaborative potential, as, at present, expertise, tools and datasets are fragmented. This paper investigates the functional characteristics of a software framework that addresses these challenges following the design science research methodology in the context of the space industry and research.
An implementation of the proposed architecture and a validation process with end users, based on the execution of different use cases, are described. These use cases cover relevant aspects of real science analysis and operation, including planetary data visualization, as the system aims at being used in future European missions. This validation suggests that the system has the
potential to enhance the way space scientists will conduct space science research in the future
Korrosionsuntersuchungen an nichtmetallisch-anorganischen Werkstoffen fuer die Auslegung von Behaeltern zur Endlagerung hochradioaktiver Abfallprodukte
A reduced-reference perceptual image and video quality metric based on edge preservation
In image and video compression and transmission, it is important to rely on an objective image/video quality metric which accurately represents the subjective quality of processed images and video sequences. In some scenarios, it is also important to evaluate the quality of the received video sequence with minimal reference to the transmitted one. For instance, for quality improvement of video transmission through closed-loop optimisation, the video quality measure can be evaluated at the receiver and provided as feedback information to the system controller. The original image/video sequence-prior to compression and transmission-is not usually available at the receiver side, and it is important to rely at the receiver side on an objective video quality metric that does not need reference or needs minimal reference to the original video sequence. The observation that the human eye is very sensitive to edge and contour information of an image underpins the proposal of our reduced reference (RR) quality metric, which compares edge information between the distorted and the original image. Results highlight that the metric correlates well with subjective observations, also in comparison with commonly used full-reference metrics and with a state-of-the-art RR metric. © 2012 Martini et al
Lipid-coated zinc oxide nanocrystals as innovative ROS-generators for photodynamic therapy
Photodynamic Therapy (PDT) is a medical treatment that combines the administration of a nontoxic drug, called photosensitizer (PS), with light irradiation of the targeted region. It has been proposed as a new cancer therapy, promising better selectivity and fewer side-effects compared to traditional chemo- and radio-therapies. PSs indeed can accumulate specifically within the region of interest so that when the light is directly focused only in that region the therapeutic effect is highly localized.
Traditional PSs, like chlorins and porphyrins, suffer from several drawbacks such as aggregation in biological media and poor biocompatibility. Thus, the development of innovative photosensitizers able to overcome these issues is crucial to the therapeutic action of PDT. Among the others, nanostructured Zinc Oxide (ZnO) has been recently proposed as new therapeutic agent and PS thanks to its semiconducting properties, biocompatible features, and ease of functionalization [1]. Nevertheless, further efforts are needed in order to improve its colloidal stability in biological media and to unravel the effective therapeutic mechanism.
Here, we propose the synthesis and characterization of lipid-coated ZnO nanoparticles as new photosensitizer for cancer PDT [2]. First, by Dynamic Light Scattering (DLS) experiments, we show that the lipid-coating increases the colloidal stability of the ZnO NPs in Phosphate buffered saline (PBS). Then, using Electron Paramagnetic Resonance (EPR) coupled with the spin-trapping technique, we demonstrate and characterize the ability of bare and lipid-coated ZnO NPs to generate Reactive Oxygen Species (ROS) in water only when remotely actuated via light irradiation. Interestingly, our results aware that the surface chemistry of the NPs greatly influence the type of photo-generated ROS. Finally, we show that our NPs are effectively internalized inside human epithelial carcinoma cells (HeLa) via a lysosomal pathway and that they are able to generate ROS inside cancer cells.
[1] B. Dumontel, M. Canta, H. Engelke, A. Chiodoni, L. Racca, A. Ancona, T. Limongi, G. Canavese and V. Cauda, âJ. Mater. Chem. B. under revision.
[2] A. Ancona, H. Engelke, N. Garino, B. Dumontel, W.Fazzini and V. Cauda, to be submitted.
The support from ERC Starting Grant â Project N. 678151 âTrojananohorseâ is gratefully acknowledged
Recommended from our members
Milk fatty acids estimated by mid-infrared spectroscopy and milk yield can predict methane emissions in dairy cows
Ruminant enteric methane emission contributes to global warming. Although breeding low methane-emitting cows appears to be possible through genetic selection, doing so requires methane emission quantification by using elaborate instrumentation (respiration chambers, SF6 technique, GreenFeed) not feasible on a large scale. It has been suggested that milk fatty acids are promising markers of methane production. We hypothesized that methane emission can be predicted from the milk fatty acid concentrations determined by mid-infrared spectroscopy, and the integration of energy-corrected milk yield would improve the prediction. Therefore, we examined relationships between methane emission of cows measured in respiration chambers and milk fatty acids, predicted by mid-infrared spectroscopy, to derive diet-specific and general prediction equations based on milk fatty acid concentrations alone and with the additional consideration of energy-corrected milk yield. Cows were fed diets differing in forage type and linseed supplementation to generate a large variation in both CH4 emission and milk fatty acids. Depending on the diet, equations derived from regression analysis explained 61 to 96% of variation of methane emission, implying the potential of milk fatty acid data predicted by mid-infrared spectroscopy as novel proxy for direct methane emission measurements. When data from all diets were analyzed collectively, the equation with energy-corrected milk yield (CH4 (L/day) = â 1364 + 9.58 Ă energy-corrected milk yield + 18.5 Ă saturated fatty acids + 32.4 Ă C18:0) showed an improved coefficient of determination of cross-validation R2 CV = 0.72 compared to an equation without energy-corrected milk yield (R2 CV = 0.61). Equations developed for diets supplemented by linseed showed a lower R2 CV as compared to diets without linseed (0.39 to 0.58 vs. 0.50 to 0.91). We demonstrate for the first time that milk fatty acid concentrations predicted by mid-infrared spectroscopy together with energy-corrected milk yield can be used to estimate enteric methane emission in dairy cows. © 2018, The Author(s)
Symmetric evaluation of multimodal human-robot interaction with gaze and standard control
© 2018 by the authors. Control of robot arms is often required in engineering and can be performed by using different methods. This study examined and symmetrically compared the use of a controller, eye gaze tracker and a combination thereof in a multimodal setup for control of a robot arm. Tasks of different complexities were defined and twenty participants completed an experiment using these interaction modalities to solve the tasks. More specifically, there were three tasks: the first was to navigate a chess piece from a square to another pre-specified square; the second was the same as the first task, but required more moves to complete; and the third task was to move multiple pieces to reach a solution to a pre-defined arrangement of the pieces. Further, while gaze control has the potential to be more intuitive than a hand controller, it suffers from limitations with regard to spatial accuracy and target selection. The multimodal setup aimed to mitigate the weaknesses of the eye gaze tracker, creating a superior system without simply relying on the controller. The experiment shows that the multimodal setup improves performance over the eye gaze tracker alone (p 0.05)
- âŠ