Comparison of high temperature, high frequency core loss and dynamic B-H loops of two 50 Ni-Fe crystalline alloys and an iron-based amorphous alloy

The availability of experimental data that characterizes the performance of soft magnetic materials for the combined conditions of high temperature and high frequency is almost nonexistent. An experimental investigation was conducted over the temperature range of 23 to 300 C and frequency range of 1 to 50 kHz to determine the effects of temperature and frequency on the core loss and dynamic B-H loops of three different soft magnetic materials; and oriented grain 50Ni-50Fe alloy, a nonoriented grain 50Ni-Fe alloy, and an iron based amorphous material (Metglas 2605SC). A comparison of these materials shows that the nonoriented grain 50Ni-50Fe alloy tends to have either the lowest or next lowest core loss for all temperatures and frequencies investigated

High frequency, high temperature specific core loss and dynamic B-H hysteresis loop characteristics of soft magnetic alloys

Limited experimental data exists for the specific core loss and dynamic B-H loops for soft magnetic materials for the combined conditions of high frequency and high temperature. This experimental study investigates the specific core loss and dynamic B-H loop characteristics of Supermalloy and Metglas 2605SC over the frequency range of 1 to 50 kHz and temperature range of 23 to 300 C under sinusoidal voltage excitation. The experimental setup used to conduct the investigation is described. The effects of the maximum magnetic flux density, frequency, and temperature on the specific core loss and on the size and shape of the B-H loops are examined

Comparison of high temperature, high frequency core loss and dynamic B-H loops of a 2V-49Fe-49Co and a grain oriented 3Si-Fe alloy

The design of power magnetic components such as transformers, inductors, motors, and generators, requires specific knowledge about the magnetic and electrical characteristics of the magnetic materials used in these components. Limited experimental data exists that characterizes the performance of soft magnetic materials for the combined conditions of high temperature and high frequency over a wide flux density range. An experimental investigation of a 2V-49-Fe-49Co (Supermendur) and a grain oriented 3 Si-Fe (Magnesil) alloy was conducted over the temperature range of 23 to 300 C and frequency range of 0.1 to 10 kHz. The effects of temperature, frequency, and maximum flux density on the core loss and dynamic B-H loops for sinusoidal voltage excitation conditions are examined for each of these materials. A comparison of the core loss of these two materials is also made over the temperature and frequency range investigated

Starting jet flows in a three-dimensional channel with larynx-shaped constriction

A numerical model for the three-dimensional starting jet flow in a channel with a static larynx-shaped constriction is presented. Detailed resolution of this kind of jet flow is necessary in order to understand the complex coupling between flow and acoustics in the process of human phonation. The numerical model is based on the equation of continuity and the Navier-Stokes equations. The investigations are done with the open source CFD package OpenFOAM. Numerical simulations are performed for a square-sectioned channel geometry, which is constricted with a fixed shape conforming to the fully opened human glottis. Time-dependent inflow boundary conditions are applied in order to model transient glottal flow rates. The setup of the numerical simulations corresponds to the configuration of a model experiment in order to allow detailed validation. The numerical results are in good agreement with the experimental data, when the near-wall region in the glottal gap is adequately resolved by the numerical grid. The results illustrate the complex interactions between the jet flow and the surrounding vortices. © 2011 Elsevier Ltd

Visible light driven non-sacrificial water oxidation and dye degradation with silver phosphates: multi-faceted morphology matters

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.The convenient synthesis of multi-faceted versusirregular shaped Ag3PO4microparticles for the visible light driven non-sacrificial water oxidation is reported. Strikingly, the multi-faceted particles are found to be more effective for oxygen evolution reaction (OER) by photocatalytic water oxidation in water and in phosphate buffer solutions as well as for dye degradation in comparison to the irregular shaped particles

Using bacterial biomarkers to identify early indicators of cystic fibrosis pulmonary exacerbation onset

Acute periods of pulmonary exacerbation are the single most important cause of morbidity in cystic fibrosis patients, and may be associated with a loss of lung function. Intervening prior to the onset of a substantially increased inflammatory response may limit the associated damage to the airways. While a number of biomarker assays based on inflammatory markers have been developed, providing useful and important measures of disease during these periods, such factors are typically only elevated once the process of exacerbation has been initiated. Identifying biomarkers that can predict the onset of pulmonary exacerbation at an early stage would provide an opportunity to intervene before the establishment of a substantial immune response, with major implications for the advancement of cystic fibrosis care. The precise triggers of pulmonary exacerbation remain to be determined; however, the majority of models relate to the activity of microbes present in the patient's lower airways of cystic fibrosis. Advances in diagnostic microbiology now allow for the examination of these complex systems at a level likely to identify factors on which biomarker assays can be based. In this article, we discuss key considerations in the design and testing of assays that could predict pulmonary exacerbations

A Review on Promising Approaches for Liquid Permeability Improvement in Softwoods

The low liquid permeability of refractory wood species such as Norway spruce [Picea abies (L.) Karst.] and white Fir (Abies alba) is related mainly to the aspiration of bordered pits during wood drying. The resulting low permeability complicates treatments with liquid preservatives or wood modification substances. This article provides a literature review on various mechanical and biotechnological approaches that were developed for improving liquid permeability. In this context, we focus on the incubation of Norway spruce wood with a white rot fungus, Physisporinus vitreus (Pers.) P. Karst. The process is termed "bioincising" and results in a significant increase in wood permeability. This is most probably caused by the selective degradation of bordered pit membranes and simple pits of xylem ray parenchyma during the initial period of wood colonization. Subsequently, we discuss how bioincising could be a potential pretreatment method for wood preservation and selected wood modification substances. Considering that these wood modification systems require specific penetration depths for optimal performance, we discuss the capability of bioincising to enhance permeability at the required penetration depths. In this regard, we propose a terminology for better differentiation of penetration depths by liquid substances into the wood

Integrated control of wood destroying basidiomycetes combining Cu-based wood preservatives and Trichoderma spp

[EN] The production of new generation of wood preservatives (without addition of a co-biocide) in combination with an exchange of wood poles on identical sites with high fungal inoculum, has resulted in an increase of premature failures of wood utility poles in the last decades. Wood destroying basidiomycetes inhabiting sites where poles have been installed, have developed resistance against wood preservatives. The objective of the in vitro studies was to identify a Trichoderma spp. with a highly antagonistic potential against wood destroying basidiomycetes that is capable of colonizing Cu-rich environments. For this purpose, the activity of five Trichoderma spp. on Cu-rich medium was evaluated according to its growth and sporulation rates. The influence of the selected Trichoderma spp. on wood colonization and degradation by five wood destroying basidiomycetes was quantitatively analyzed by means of dry weight loss of wood specimens. Furthermore, the preventative effect of the selected Trichoderma spp. in combination with four Cu-based preservatives was also examined by mass loss and histological changes in the wood specimens. Trichoderma harzianum (T-720) was considered the biocontrol agent with higher antagonistic potential to colonize Cu-rich environments (up to 0.1% CuSO4 amended medium). T. harzianum demonstrated significant preventative effect on wood specimens against four wood destroying basidiomycetes. The combined effect of T. harzianum and Cu-based wood preservatives demonstrated that after 9 months incubation with two wood destroying basidiomycetes, wood specimens treated with 3.8 kg m-3 copper-chromium had weight losses between 55±65%, whereas containers previously treated with T. harzianum had significantly lower weight losses (0±25%). Histological studies on one of the wood destroying basidiomycetes revealed typical decomposition of wood cells by brown-rot fungi in Cu-impregnated samples, that were notably absent in wood specimens previously exposed to T. harzianum. It is concluded that carefully selected Trichoderma isolates can be used for integrated wood protection against a range of wood destroying basidiomycetes and may have potential for integrated wood protection in the field.The authors are pleased to acknowledge the financial support by the Swiss CTI (Project No. 17001.1 PFLS-LS).Ribera, J.; Fink, S.; Bas Cerdá, MDC.; Schwarze, FWMR. (2017). Integrated control of wood destroying basidiomycetes combining Cu-based wood preservatives and Trichoderma spp. PLoS ONE. 12(4). https://doi.org/10.6084/m9.figshare.4743061S12

Precipitation of T₁ and θ′ Phase in Al-4Cu-1Li-0.25Mn During Age Hardening: Microstructural Investigation and Phase-Field Simulation

Experimental and phase field studies of age hardening response of a high purity Al-4Cu-1Li-0.25Mn-alloy (mass %) during isothermal aging are conducted. In the experiments, two hardening phases are identified: the tetragonal θ′ (Al2Cu) phase and the hexagonal T1 (Al2CuLi) phase. Both are plate shaped and of nm size. They are analyzed with respect to the development of their size, number density and volume fraction during aging by applying different analysis techniques in TEM in combination with quantitative microstructural analysis. 3D phase-field simulations of formation and growth of θ′ phase are performed in which the full interfacial, chemical and elastic energy contributions are taken into account. 2D simulations of T1 phase are also investigated using multi-component diffusion without elasticity. This is a first step toward a complex phase-field study of T1 phase in the ternary alloy. The comparison between experimental and simulated data shows similar trends. The still unsaturated volume fraction indicates that the precipitates are in the growth stage and that the coarsening/ripening stage has not yet been reached