60 research outputs found
The Brightness of Density Structures at Large Solar Elongation Angles: What is Being Observed by STEREO/SECCHI?
We discuss features of coronal mass ejections (CMEs) that are specific to
heliospheric observations at large elongation angles. Our analysis is focused
on a series of two eruptions that occurred on 2007 January 24-25, which were
tracked by the Heliospheric Imagers (HIs) onboard STEREO. Using a
three-dimensional (3-D) magneto-hydrodynamic simulation of these ejections with
the Space Weather Modeling Framework (SWMF), we illustrate how the combination
of the 3-D nature of CMEs, solar rotation, and geometry associated with the
Thomson sphere results in complex effects in the brightness observed by the
HIs. Our results demonstrate that these effects make any in-depth analysis of
CME observations without 3-D simulations challenging. In particular, the
association of bright features seen by the HIs with fronts of CME-driven shocks
is far from trivial. In this Letter, we argue that, on 2007 January 26, the HIs
observed not only two CMEs, but also a dense corotating stream compressed by
the CME-driven shocks.Comment: 5 pages, 2 figures, accepted for ApJ Lette
Determining the Magnetic Field Orientation of Coronal Mass Ejections from Faraday Rotation
We describe a method to measure the magnetic field orientation of coronal
mass ejections (CMEs) using Faraday rotation (FR). Two basic FR profiles,
Gaussian-shaped with a single polarity or "N"-like with polarity reversals, are
produced by a radio source occulted by a moving flux rope depending on its
orientation. These curves are consistent with the Helios observations,
providing evidence for the flux-rope geometry of CMEs. Many background radio
sources can map CMEs in FR onto the sky. We demonstrate with a simple flux rope
that the magnetic field orientation and helicity of the flux rope can be
determined 2-3 days before it reaches Earth, which is of crucial importance for
space weather forecasting. An FR calculation based on global
magnetohydrodynamic (MHD) simulations of CMEs in a background heliosphere shows
that FR mapping can also resolve a CME geometry curved back to the Sun. We
discuss implementation of the method using data from the Mileura Widefield
Array (MWA).Comment: 22 pages with 9 figures, accepted for publication in Astrophys.
Thermodynamic Structure of the Solar Corona: Tomographic Reconstructions and MHD Modeling
We carry out a study of the global three-dimensional (3D) structure of the
electron density and temperature of the quiescent inner solar corona () by means of tomographic reconstructions and magnetohydrodynamic
simulations. We use differential emission measure tomography (DEMT) and the
Alfv\'en Wave Solar Model (AWSoM), in their latest versions. Two target
rotations were selected from the solar minimum between solar cycles (SCs) 23
and 24 and the declining phase of SC 24. We report in quantitative detail on
the 3D thermodynamic structure of the core and outer layers of the streamer
belt, and of the high latitude coronal holes (CH), as revealed by the DEMT
analysis. We report on the presence of two types of structures within the
streamer belt, loops with temperature decreasing/increasing with height (dubbed
down/up loops), as reported first in previous DEMT studies. We also estimate
the heating energy flux required at the coronal base to keep these structures
stable, found to be or order , consistently with
previous DEMT and spectroscopic studies. We discuss how these findings are
consistent with coronal dissipation of Alfv\'en waves. We compare the 3D
results of DEMT and AWSoM in distinct magnetic structures. We show that the
agreement between the products of both techniques is the best so far, with an
overall agreement , depending on the target rotation and the
specific coronal region. In its current implementation the ASWsoM model can not
reproduce down loops though. Also, in the source region of the fast and slow
components of the solar wind, the electron density of the AWSoM model increases
with latitude, opposite to the trend observed in DEMT reconstructions
The Coupled Evolution of Electrons and Ions in Coronal Mass Ejection-driven shocks
We present simulations of coronal mass ejections (CMEs) performed with a new two-temperature coronal model developed at the University of Michigan, which is able to address the coupled thermodynamics of the electron and proton populations in the context of a single fluid. This model employs heat conduction for electrons, constant adiabatic index (γ = 5/3), and includes Alfvén wave pressure to accelerate the solar wind. The Wang-Sheeley-Arge empirical model is used to determine the Alfvén wave pressure necessary to produce the observed bimodal solar wind speed. The Alfvén waves are dissipated as they propagate from the Sun and heat protons on open magnetic field lines to temperatures above 2 MK. The model is driven by empirical boundary conditions that includes GONG magnetogram data to calculate the coronal field, and STEREO /EUVI observations to specify the density and temperature at the coronal boundary by the Differential Emission Measure Tomography method. With this model, we simulate the propagation of fast CMEs and study the thermodynamics of CME-driven shocks. Since the thermal speed of the electrons greatly exceeds the speed of the CME, only protons are directly heated by the shock. Coulomb collisions low in the corona couple the protons and electrons allowing heat exchange between the two species. However, the coupling is so brief that the electrons never achieve more than 10% of the maximum temperature of the protons. We find that heat is able to conduct on open magnetic field lines and rapidly propagates ahead of the CME to form a shock precursor of hot electrons.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/98571/1/0004-637X_756_1_81.pd
On Signatures of Twisted Magnetic Flux Tube Emergence
Recent studies of NOAA active region 10953, by Okamoto {\it et al.} ({\it
Astrophys. J. Lett.} {\bf 673}, 215, 2008; {\it Astrophys. J.} {\bf 697}, 913,
2009), have interpreted photospheric observations of changing widths of the
polarities and reversal of the horizontal magnetic field component as
signatures of the emergence of a twisted flux tube within the active region and
along its internal polarity inversion line (PIL). A filament is observed along
the PIL and the active region is assumed to have an arcade structure. To
investigate this scenario, MacTaggart and Hood ({\it Astrophys. J. Lett.} {\bf
716}, 219, 2010) constructed a dynamic flux emergence model of a twisted
cylinder emerging into an overlying arcade. The photospheric signatures
observed by Okamoto {\it et al.} (2008, 2009) are present in the model although
their underlying physical mechanisms differ. The model also produces two
additional signatures that can be verified by the observations. The first is an
increase in the unsigned magnetic flux in the photosphere at either side of the
PIL. The second is the behaviour of characteristic photospheric flow profiles
associated with twisted flux tube emergence. We look for these two signatures
in AR 10953 and find negative results for the emergence of a twisted flux tube
along the PIL. Instead, we interpret the photospheric behaviour along the PIL
to be indicative of photospheric magnetic cancellation driven by flows from the
dominant sunspot. Although we argue against flux emergence within this
particular region, the work demonstrates the important relationship between
theory and observations for the successful discovery and interpretation of
signatures of flux emergence.Comment: 14 pages, 8 figures, accepted for publication in Solar Physic
3D MHD Flux Emergence Experiments: Idealized models and coronal interactions
This paper reviews some of the many 3D numerical experiments of the emergence
of magnetic fields from the solar interior and the subsequent interaction with
the pre-existing coronal magnetic field. The models described here are
idealized, in the sense that the internal energy equation only involves the
adiabatic, Ohmic and viscous shock heating terms. However, provided the main
aim is to investigate the dynamical evolution, this is adequate. Many
interesting observational phenomena are explained by these models in a
self-consistent manner.Comment: Review article, accepted for publication in Solar Physic
Triggering an eruptive flare by emerging flux in a solar active-region complex
A flare and fast coronal mass ejection originated between solar active
regions NOAA 11514 and 11515 on July 1, 2012 in response to flux emergence in
front of the leading sunspot of the trailing region 11515. Analyzing the
evolution of the photospheric magnetic flux and the coronal structure, we find
that the flux emergence triggered the eruption by interaction with overlying
flux in a non-standard way. The new flux neither had the opposite orientation
nor a location near the polarity inversion line, which are favorable for strong
reconnection with the arcade flux under which it emerged. Moreover, its flux
content remained significantly smaller than that of the arcade (approximately
40 %). However, a loop system rooted in the trailing active region ran in part
under the arcade between the active regions, passing over the site of flux
emergence. The reconnection with the emerging flux, leading to a series of jet
emissions into the loop system, caused a strong but confined rise of the loop
system. This lifted the arcade between the two active regions, weakening its
downward tension force and thus destabilizing the considerably sheared flux
under the arcade. The complex event was also associated with supporting
precursor activity in an enhanced network near the active regions, acting on
the large-scale overlying flux, and with two simultaneous confined flares
within the active regions.Comment: Accepted for publication in Topical Issue of Solar Physics: Solar and
Stellar Flares. 25 pages, 12 figure
4pi Models of CMEs and ICMEs
Coronal mass ejections (CMEs), which dynamically connect the solar surface to
the far reaches of interplanetary space, represent a major anifestation of
solar activity. They are not only of principal interest but also play a pivotal
role in the context of space weather predictions. The steady improvement of
both numerical methods and computational resources during recent years has
allowed for the creation of increasingly realistic models of interplanetary
CMEs (ICMEs), which can now be compared to high-quality observational data from
various space-bound missions. This review discusses existing models of CMEs,
characterizing them by scientific aim and scope, CME initiation method, and
physical effects included, thereby stressing the importance of fully 3-D
('4pi') spatial coverage.Comment: 14 pages plus references. Comments welcome. Accepted for publication
in Solar Physics (SUN-360 topical issue
Is null-point reconnection important for solar flux emergence?
The role of null-point reconnection in a 3D numerical MHD model of solar
emerging flux is investigated. The model consists of a twisted magnetic flux
tube rising through a stratified convection zone and atmosphere to interact and
reconnect with a horizontal overlying magnetic field in the atmosphere. Null
points appear as the reconnection begins and persist throughout the rest of the
emergence, where they can be found mostly in the model photosphere and
transition region, forming two loose clusters on either side of the emerging
flux tube. Up to 26 nulls are present at any one time, and tracking in time
shows that there is a total of 305 overall, despite the initial simplicity of
the magnetic field configuration. We find evidence for the reality of the nulls
in terms of their methods of creation and destruction, their balance of signs,
their long lifetimes, and their geometrical stability. We then show that due to
the low parallel electric fields associated with the nulls, null-point
reconnection is not the main type of magnetic reconnection involved in the
interaction of the newly emerged flux with the overlying field. However, the
large number of nulls implies that the topological structure of the magnetic
field must be very complex and the importance of reconnection along separators
or separatrix surfaces for flux emergence cannot be ruled out.Comment: 26 pages, 12 figures. Added one referenc
- …