Controlled ecological life support system breadboard project, 1988

The Closed Ecological Life Support System (CELSS) Breadboard Project, NASA's effort to develop the technology required to produce a functioning bioregenerative system, is discussed. The different phases of the project and its current status are described. The relationship between the project components are shown, and major project activities for fiscal years 1989 to 1993 are listed. The Biomass Production Chamber (BPC) became operational and tests of wheat as a single crop are nearing completion

Results from new fungus-tolerant grapevine varieties for Organic Viticulture

Two red and three white new fungus-tolerant grape varieties were tested within a period of five years. REGENT, RONDO, JOHANNITER and Gf 48-12 show a better wine quality than PINOT NOIR or SILVANER and can be recommended for Organic Viticulture as well as for the conventional viticulture to reduce copper and fungicide applications

System software for the finite element machine

The Finite Element Machine is an experimental parallel computer developed at Langley Research Center to investigate the application of concurrent processing to structural engineering analysis. This report describes system-level software which has been developed to facilitate use of the machine by applications researchers. The overall software design is outlined, and several important parallel processing issues are discussed in detail, including processor management, communication, synchronization, and input/output. Based on experience using the system, the hardware architecture and software design are critiqued, and areas for further work are suggested

A study of the response of nonlinear springs

The various phases to developing a methodology for studying the response of a spring-reinforced arch subjected to a point load are discussed. The arch is simply supported at its ends with both the spring and the point load assumed to be at midspan. The spring is present to off-set the typical snap through behavior normally associated with arches, and to provide a structure that responds with constant resistance over a finite displacement. The various phases discussed consist of the following: (1) development of the closed-form solution for the shallow arch case; (2) development of a finite difference analysis to study (shallow) arches; and (3) development of a finite element analysis for studying more general shallow and nonshallow arches. The two numerical analyses rely on a continuation scheme to move the solution past limit points, and to move onto bifurcated paths, both characteristics being common to the arch problem. An eigenvalue method is used for a continuation scheme. The finite difference analysis is based on a mixed formulation (force and displacement variables) of the governing equations. The governing equations for the mixed formulation are in first order form, making the finite difference implementation convenient. However, the mixed formulation is not well-suited for the eigenvalue continuation scheme. This provided the motivation for the displacement based finite element analysis. Both the finite difference and the finite element analyses are compared with the closed form shallow arch solution. Agreement is excellent, except for the potential problems with the finite difference analysis and the continuation scheme. Agreement between the finite element analysis and another investigator's numerical analysis for deep arches is also good

Constraint capture and maintenance in engineering design

The Designers' Workbench is a system, developed by the Advanced Knowledge Technologies (AKT) consortium to support designers in large organizations, such as Rolls-Royce, to ensure that the design is consistent with the specification for the particular design as well as with the company's design rule book(s). In the principal application discussed here, the evolving design is described against a jet engine ontology. Design rules are expressed as constraints over the domain ontology. Currently, to capture the constraint information, a domain expert (design engineer) has to work with a knowledge engineer to identify the constraints, and it is then the task of the knowledge engineer to encode these into the Workbench's knowledge base (KB). This is an error prone and time consuming task. It is highly desirable to relieve the knowledge engineer of this task, and so we have developed a system, ConEditor+ that enables domain experts themselves to capture and maintain these constraints. Further we hypothesize that in order to appropriately apply, maintain and reuse constraints, it is necessary to understand the underlying assumptions and context in which each constraint is applicable. We refer to them as “application conditions” and these form a part of the rationale associated with the constraint. We propose a methodology to capture the application conditions associated with a constraint and demonstrate that an explicit representation (machine interpretable format) of application conditions (rationales) together with the corresponding constraints and the domain ontology can be used by a machine to support maintenance of constraints. Support for the maintenance of constraints includes detecting inconsistencies, subsumption, redundancy, fusion between constraints and suggesting appropriate refinements. The proposed methodology provides immediate benefits to the designers and hence should encourage them to input the application conditions (rationales)

The role of ontologies in creating and maintaining corporate knowledge: a case study from the aero industry

The Designers’ Workbench is a system, developed to support designers in large organizations, such as Rolls-Royce, by making sure that the design is consistent with the specification for the particular design as well as with the company’s design rule book(s). The evolving design is described against a jet engine ontology. Currently, to capture the constraint information, a domain expert (design engineer) has to work with a knowledge engineer to identify the constraints, and it is then the task of the knowledge engineer to encode these into the Workbench’s knowledge base (KB). This is an error prone and time consuming task. It is highly desirable to relieve the knowledge engineer of this task, and so we have developed a tool, ConEditor+ that enables domain experts themselves to capture and maintain these constraints. The tool allows the user to combine selected entities from the domain ontology with keywords and operators of a constraint language to form a constraint expression. Further, we hypothesize that to apply constraints appropriately, it is necessary to understand the context in which each constraint is applicable. We refer to this as “application conditions”. We show that an explicit representation of application conditions, in a machine interpretable format, along with the constraints and the domain ontology can be used to support the verification and maintenance of constraints

ConEditor+: Capture and Maintenance of Constraints in Engineering Design

The Designers' Workbench is a system, developed to support designers in large organizations, such as Rolls-Royce, by making sure that the design is consistent with the specification for the particular design as well as with the company’s design rule book(s). Currently, to capture the constraint information, a domain expert (design engineer) has to work with a knowledge engineer to identify the constraints, and it is then the task of the knowledge engineer to encode these into the Workbench's knowledge base (KB). This is an error prone and time consuming task. It is highly desirable to relieve the knowledge engineer of this task, and so we have developed a tool, ConEditor+ that enables domain experts themselves to capture and maintain these constraints. The tool allows the user to combine selected entities from the domain ontology with keywords and operators of a constraint language to form a constraint expression. Further, we hypothesize that to apply constraints appropriately, it is necessary to understand the context in which each constraint is applicable. We refer to this as "application conditions". We show that an explicit representation of application conditions, in a machine interpretable format, along with the constraints and the domain ontology can be used to support the verification and maintenance of constraints

Plan for CELSS test bed project

The Closed Ecological Life Support Systems (CELSS) testbed project will achieve two major goals: It will develop the knowledge and technology needed to build and test biological or combined biological physiochemical regenerative life support systems. It will fabricate, test, and operate ground based facilities to accomplish proof-of-concent testing and evaluation leading to flight experimentation. The project will combine basic research and applied research/engineering to achieve a phased, integrated development of hardware, systems, and techniques for food and oxygen production, food processing, and waste processing in closed systems. The project will design, fabricate, and operate within three years a botanical production system scaled to a sufficient size to verify oxygen and nutrient load production (carbohydrates, fats, proteins) at a useable level. It will develop within five years a waste management system compatible with the botanical production system and a food processing system that converts available biomass into edible products. It will design, construct, and operate within ten years a ground based candidate CELSS that includes man as an active participant in the system. It will design a flight CELSS module within twelve years and construct and conduct initial flight tests within fifteen years

The devil in the deep: Expanding the known habitat of a rare and protected fish

The accepted geographic range of a species is related to both opportunity and effort in sampling that range. In deepwater ecosystems where human access is limited, the geographic ranges of many marine species are likely to be underestimated. A chance recording from baited cameras deployed on deep uncharted reef revealed an eastern blue devil fish (Paraplesiops bleekeri) at a depth of 51 m and more than 2 km further down the continental shelf slope than previously observed. This is the first verifiable observation of eastern blue devil fish, a protected and endemic southeastern Australian temperate reef species, at depths greater than the typically accepted depth range of 30 m. Knowledge on the ecology of this and many other reef species is indeed often limited to shallow coastal reefs, which are easily accessible by divers and researchers. Suitable habitat for many reef species appears to exist on deeper offshore reefs but is likely being overlooked due to the logistics of conducting research on these often uncharted habitats. On the basis of our observation at a depth of 51 m and observations by recreational fishers catching eastern blue devil fishes on deep offshore reefs, we suggest that the current depth range of eastern blue devil fish is being underestimated at 30 m. We also observed several common reef species well outside of their accepted depth range. Notably, immaculate damsel (Mecaenichthys immaculatus), red morwong (Cheilodactylus fuscus), mado (Atypichthys strigatus), white-ear (Parma microlepis) and silver sweep (Scorpis lineolata) were abundant and recorded in a number of locations at up to a depth of at least 55 m. This underestimation of depth potentially represents a large area of deep offshore reefs and micro habitats out on the continental shelf that could contribute to the resilience of eastern blue devil fish to extinction risk and contribute to the resilience of many reef species to climate change

A taxonomic guide to the mysids of the South Atlantic Bight.

Following the examination of extensive collections from the National Museum of Natural History (NMNH), the Southeastern Regional Taxonomic Center (SERTC), and other regional institutions, 18 species of the family Mysidae are recognized and described from the South Atlantic Bight (Cape Lookout, North Carolina to Cape Canaveral, Florida). This report includes synonymies of previous records, as well as new species distribution records. Previous regional accounts of Metamysidopsis munda and Metamysidopsis mexicana are attributed to Metamysidopsis swifti. New regional records are established for Amathimysis brattegardi, Heteromysis beetoni, and Siriella thompsonii. Two other species tentatively identified as Amathimysis sp. (nr. serrata) and Mysidopsis sp. (cf. mortenseni) may represent new taxa. Neobathymysis renoculata is included and discussed as a potential regional species. An illustrated key to the species currently known from the South Atlantic Bight is presented. Relevant taxonomic, distributional, and ecological information is also included for each species. (PDF file contains 45 pages.