212 research outputs found
Solar energy conversion
If solar energy is to become a practical alternative to fossil fuels, we must have efficient ways to convert photons into electricity, fuel, and heat. The need for better conversion technologies is a driving force behind many recent developments in biology, materials, and especially nanoscience
Impact of charge transport on current voltage characteristics and power conversion efficiency of organic solar cells
This work elucidates the impact of charge transport on the photovoltaic properties of organic solar cells. Here we show that the analysis of current-voltage curves of organic solar cells under illumination with the Shockley equation results in values for ideality factor, photo-current and parallel resistance, which lack physical meaning. Drift-diffusion simulations for a wide range of charge-carrier mobilities and illumination intensities reveal significant carrier accumulation caused by poor transport properties, which is not included in the Shockley equation. As a consequence, the separation of the quasi Fermi levels in the organic photoactive layer (internal voltage) differs substantially from the external voltage for almost all conditions. We present a new analytical model, which considers carrier transport explicitly. The model shows excellent agreement with full drift-diffusion simulations over a wide range of mobilities and illumination intensities, making it suitable for realistic efficiency predictions for organic solar cells
Theory and simulation of quantum photovoltaic devices based on the non-equilibrium Green's function formalism
This article reviews the application of the non-equilibrium Green's function
formalism to the simulation of novel photovoltaic devices utilizing quantum
confinement effects in low dimensional absorber structures. It covers
well-known aspects of the fundamental NEGF theory for a system of interacting
electrons, photons and phonons with relevance for the simulation of
optoelectronic devices and introduces at the same time new approaches to the
theoretical description of the elementary processes of photovoltaic device
operation, such as photogeneration via coherent excitonic absorption,
phonon-mediated indirect optical transitions or non-radiative recombination via
defect states. While the description of the theoretical framework is kept as
general as possible, two specific prototypical quantum photovoltaic devices, a
single quantum well photodiode and a silicon-oxide based superlattice absorber,
are used to illustrated the kind of unique insight that numerical simulations
based on the theory are able to provide.Comment: 20 pages, 10 figures; invited review pape
Optical coherence tomography reflects clinically relevant gray matter damage in patients with multiple sclerosis
BACKGROUND: Retinal degeneration leading to optical coherence tomography (OCT) changes is frequent in patients with multiple sclerosis (PwMS). OBJECTIVE: To investigate associations among OCT changes, MRI measurements of global and regional brain volume loss, and physical and cognitive impairment in PwMS. METHODS: 95 PwMS and 52 healthy controls underwent OCT and MRI examinations. Mean peripapillary retinal nerve fiber layer (pRNFL) thickness and ganglion cell/inner plexiform layer (GCIPL) volume were measured. In PwMS disability was quantified with the Expanded Disability Status Scale (EDSS) and Symbol Digit Modalities Test (SDMT). Associations between OCT, MRI, and clinical measures were investigated with multivariable regression models. RESULTS: In PwMS, pRNFL and GCIPL were associated with the volume of whole brain (p < 0.04), total gray matter (p < 0.002), thalamus (p ≤ 0.04), and cerebral cortex (p ≤ 0.003) -both globally and regionally-, but not white matter. pRNFL and GCIPL were also inversely associated with T2-lesion volume (T2LV), especially in the optic radiations (p < 0.0001). The brain volumes associated with EDSS and SDMT significantly overlapped with those correlating with pRNFL and GCIPL. CONCLUSIONS: In PwMS, pRNFL and GCIPL reflect the integrity of clinically-relevant gray matter structures, underling the value of OCT measures as markers of neurodegeneration and disability in multiple sclerosis
Male factors determining the outcome of intracytoplasmic sperm injection with epididymal and testicular spermatozoa
Summary. During a period of 8 years, 1079 intracytoplasmic sperm injection (ICSI) procedures with aspirated epididymal or testicular spermatozoa were performed. Epididymal spermatozoa were used in 172 cycles and testicular spermatozoa or spermatids in 907 cycles. Multiple biopsies were obtained from at least two different locations in the testes. Retrieved spermatozoa were used after cryopreservation (frozen) or immediately after aspiration (fresh). Three hundred patients had obstructive azoospermia (OA) or ejaculation failure. In 414 cases, azoospermia was caused by impaired spermatogenesis resulting from maldescended testes, chemotherapy/radiotherapy, or by Sertoli-cellonly syndrome, genetic disorders or unknown aetiology. Transfer rates, pregnancy rates and birth rates per ICSI cycle showed no statistically significant differences between testicular and epididymal spermatozoa in men with OA (28% average birth rates in both cases). However, birth rates differed significantly with regard to the status of spermatogenesis. Treatment of men with nonobstructive azoospermia (NOA) resulted in a birth rate of 19% per cycle. In all patient groups, there was no difference in the birth rates achieved with fresh and cryopreserved spermatozoa. While testicular volume, follicle-stimulating hormone level and age of the male patient are no statistically significant prognostic factors, the underlying cause of azoospermia is the most important factor determining the outcome of ICSI with epididymal and testicular spermatozoa. The pregnancy rate is lower in NOA patients than in those with OA
Recommended from our members
Perovskite Solar Cells with Carbon-Based Electrodes – Quantification of Losses and Strategies to Overcome Them
Funder: UNIQUEFunder: National University of Ireland Travelling StudentshipFunder: Engineering and Physical Sciences Research Council; Id: http://dx.doi.org/10.13039/501100000266Funder: Cambridge Trust ScholarshipFunder: Robert Gardiner ScholarshipCarbon-based electrodes represent a promising approach to improve stability and up-scalability of perovskite photovoltaics. The temperature at which these contacts are processed defines the absorber grain size of the perovskite solar cell: in cells with low-temperature carbon-based electrodes (L-CPSCs), layer-by-layer deposition is possible, allowing perovskite crystals to be large (>100 nm), while in cells with high-temperature carbon-based contacts (H-CPSCs), crystals are constrained to 10-20 nm size. To enhance the power conversion efficiency of these devices, the main loss mechanisms were identified for both systems. Measurements of charge carrier lifetime, quasi-Fermi level splitting (QFLS) and light-intensity-dependent behavior, supported by numerical simulations, clearly demonstrate that H-CPSCs strongly suffer from non-radiative losses in the perovskite absorber, primarily due to numerous grain boundaries. In contrast, large crystals of L-CPSCs provide long carrier lifetime (1.8 µs) and exceptionally high QFLS of 1.21 eV for an absorber bandgap of 1.6 eV. These favorable characteristics explain the remarkable open-circuit voltage (VOC) of over 1.1 V in hole-selective layer-free L-CPSCs. However, the low photon absorption and poor charge transport in these cells limit their potential. Finally, effective strategies are provided to reduce non-radiative losses in H-CPSCs, transport losses in L-CPSCs and to improve photon management in both cell types.This work has been partially funded within the projects PROPER financed from the German Ministry of Education and Research under funding number 01DR19007 and UNIQUE supported under umbrella of SOLAR-ERA.NET_cofund by ANR, PtJ, MIUR, MINECO-AEI and SWEA, within the EU's HORIZON 2020 Research and Innovation Program (cofund ERA-NET Action No. 691664). D. B. acknowledges the scholarship support of the German Federal Environmental Foundation (DBU) and S. Z. acknowledges the scholarship support of the German Academic Exchange Service (DAAD). B.Y. and A.Ha. acknowledge the funding from the European Union’s Horizon 2020 research and innovation program ESPRESSO under the agreement No.: 764047. This work has also been partially funded by Swiss National Science Foundation with Project No. 200020_185041. T.D. acknowledges a National University of Ireland Travelling Studentship. K.F. acknowledges a George and Lilian Schiff Studentship, Winton Studentship, the Engineering and Physical Sciences Research Council (EPSRC) studentship, Cambridge Trust Scholarship, and Robert Gardiner Scholarship. S.S. acknowledges support from the Royal Society and Tata Group (UF150033). M.A. acknowledges funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No.841386. The authors would like to thank Maryamsadat Heydarian and Laura Stevens for their EQE and AFM measurements. The authors thank the EPSRC (EP/R023980/1) for funding
Perovskite Solar Cells with Carbon-Based Electrodes – Quantification of Losses and Strategies to Overcome Them
Funder: UNIQUEFunder: National University of Ireland Travelling StudentshipFunder: Engineering and Physical Sciences Research Council; Id: http://dx.doi.org/10.13039/501100000266Funder: Cambridge Trust ScholarshipFunder: Robert Gardiner ScholarshipCarbon-based electrodes represent a promising approach to improve stability and up-scalability of perovskite photovoltaics. The temperature at which these contacts are processed defines the absorber grain size of the perovskite solar cell: in cells with low-temperature carbon-based electrodes (L-CPSCs), layer-by-layer deposition is possible, allowing perovskite crystals to be large (>100 nm), while in cells with high-temperature carbon-based contacts (H-CPSCs), crystals are constrained to 10-20 nm size. To enhance the power conversion efficiency of these devices, the main loss mechanisms were identified for both systems. Measurements of charge carrier lifetime, quasi-Fermi level splitting (QFLS) and light-intensity-dependent behavior, supported by numerical simulations, clearly demonstrate that H-CPSCs strongly suffer from non-radiative losses in the perovskite absorber, primarily due to numerous grain boundaries. In contrast, large crystals of L-CPSCs provide long carrier lifetime (1.8 µs) and exceptionally high QFLS of 1.21 eV for an absorber bandgap of 1.6 eV. These favorable characteristics explain the remarkable open-circuit voltage (VOC) of over 1.1 V in hole-selective layer-free L-CPSCs. However, the low photon absorption and poor charge transport in these cells limit their potential. Finally, effective strategies are provided to reduce non-radiative losses in H-CPSCs, transport losses in L-CPSCs and to improve photon management in both cell types.This work has been partially funded within the projects PROPER financed from the German Ministry of Education and Research under funding number 01DR19007 and UNIQUE supported under umbrella of SOLAR-ERA.NET_cofund by ANR, PtJ, MIUR, MINECO-AEI and SWEA, within the EU's HORIZON 2020 Research and Innovation Program (cofund ERA-NET Action No. 691664). D. B. acknowledges the scholarship support of the German Federal Environmental Foundation (DBU) and S. Z. acknowledges the scholarship support of the German Academic Exchange Service (DAAD). B.Y. and A.Ha. acknowledge the funding from the European Union’s Horizon 2020 research and innovation program ESPRESSO under the agreement No.: 764047. This work has also been partially funded by Swiss National Science Foundation with Project No. 200020_185041. T.D. acknowledges a National University of Ireland Travelling Studentship. K.F. acknowledges a George and Lilian Schiff Studentship, Winton Studentship, the Engineering and Physical Sciences Research Council (EPSRC) studentship, Cambridge Trust Scholarship, and Robert Gardiner Scholarship. S.S. acknowledges support from the Royal Society and Tata Group (UF150033). M.A. acknowledges funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No.841386. The authors would like to thank Maryamsadat Heydarian and Laura Stevens for their EQE and AFM measurements. The authors thank the EPSRC (EP/R023980/1) for funding
Observation of Photovoltaic Action from Photoacid-Modified Nafion Due to Light-Driven Ion Transport
Replacing passive ion-exchange membranes, like Nafion, with membranes that use light to drive ion transport would allow membranes in photoelectrochemical technologies to serve in an active role. Toward this, we modified perfluorosulfonic acid ionomer membranes with organic pyrenol-based photoacid dyes to sensitize the membranes to visible light and initiate proton transport. Covalent modification of the membranes was achieved by reacting Nafion sulfonyl fluoride poly(perfluorosulfonyl fluoride) membranes with the photoacid 8-hydroxypyrene-1,3,6-tris(2-aminoethylsulfonamide). The modified membranes were strongly colored and maintained a high selectivity for cations over anions. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and ion-exchange measurements together provided strong evidence of covalent bond formation between the photoacids and the polymer membranes. Visible-light illumination of the photoacid-modified membranes resulted in a maximum power-producing ionic photoresponse of ∼100 μA/cm2 and ∼1 mV under 40 Suns equivalent excitation with 405 nm light. In comparison, membranes that did not contain photoacids and instead contained ionically associated RuII-polypyridyl coordination compound dyes, which are not photoacids, exhibited little-to-no photoeffects (∼1 μA/cm2). These disparate photocurrents, yet similar yields for nonradiative excited-state decay from the photoacids and the RuII dyes, suggest temperature gradients were not likely the cause of the observed photovoltaic action from photoacid-modified membranes. Moreover, spectral response measurements supported that light absorption by the covalently bound photoacids was required in order to observe photoeffects. These results represent the first demonstration of photovoltaic action from an ion-exchange membrane and offer promise for supplementing the power demands of electrochemical processes with renewable sunlight-driven ion transport
Characterization of the interface properties in a-Si : H/c-Si heterostructures by photoluminescence
- …