76 research outputs found
Flood trends along the Rhine: the role of river training
Several previous studies have detected positive trends in flood flows in German rivers, among others, at Rhine gauges over the past six decades. The presence and detectability of the climate change signal in flood records has been controversially discussed, particularly against the background of massive river training measures in the Rhine. In the past the Rhine catchment has been heavily trained, including the construction of the Rhine weir cascade, flood protection dikes and detention basins. The present study investigates the role of river training on changes in annual maximum daily flows at Rhine gauges starting from Maxau down to Lobith. In particular, the effect of the Rhine weir cascade and of a series of detention basins was investigated. By homogenising the original flood flow records in the period from 1952 till 2009, the annual maximum series were computed that would have been recorded had river training measures not been in place. Using multiple trend analysis, relative changes in the homogenised time series were found to be from a few percentage points to more than 10 percentage points smaller compared to the original records. This effect is attributable to the river training measures, and primarily to the construction of the Rhine weir cascade. The increase in Rhine flood discharges during this period was partly caused by an unfavourable superposition of the Rhine and Neckar flood waves. This superposition resulted from an acceleration of the Rhine waves due to the construction of the weir cascade and associated channelisation and dike heightening. However, at the same time, tributary flows across the entire Upper and Lower Rhine, which enhance annual maximum Rhine peaks, showed strong positive trends. This suggests the dominance of another driver or drivers which acted alongside river training
Quasi 2D hydrodynamic modelling of the flooded hinterland due to dyke breaching on the Elbe River
In flood modeling, many 1D and 2D combination and 2D models are used to simulate diversion of water from rivers through dyke breaches into the hinterland for extreme flood events. However, these models are too demanding in data requirements and computational resources which is an important consideration when uncertainty analysis using Monte Carlo techniques is used to complement the modeling exercise. The goal of this paper is to show the development of a quasi-2D modeling approach, which still calculates the dynamic wave in 1D but the discretisation of the computational units are in 2D, allowing a better spatial representation of the flow in the hinterland due to dyke breaching without a large additional expenditure on data pre-processing and computational time. A 2D representation of the flow and velocity fields is required to model sediment and micro-pollutant transport. The model DYNHYD (1D hydrodynamics) from the WASP5 modeling package was used as a basis for the simulations. The model was extended to incorporate the quasi-2D approach and a Monte-Carlo Analysis was used to conduct a flood sensitivity analysis to determine the sensitivity of parameters and boundary conditions to the resulting water flow. An extreme flood event on the Elbe River, Germany, with a possible dyke breach area was used as a test case. The results show a good similarity with those obtained from another 1D/2D modeling study
Model system development and uncertainty for the provisionary management of extreme floods in large river basins
International audienceA research project is introduced in which a modelling system is being developed to quantify risks of extreme flooding in large river basins. In the system, computer models and modules are coupled to simulate the functional chain: hydrology - hydraulics - polder diversion - dyke failure - flooding - damage estimate - risk assessment. In order to reduce uncertainty in flood frequency analyses, data sets are complimented with information from historical chronicles and artwork. Probable maximum precipitation and discharge are calculated to indicate upper bounds of meteorological and hydrological extremes. Uncertainty analysis is investigated for different degrees of model complexity and compared at different basin scales
Estimating parameter values of a socio-hydrological flood model
Socio-hydrological modelling studies that have been published so far show that dynamic coupled human-flood models are a promising tool to represent the phenomena and the feedbacks in human-flood systems. So far these models are mostly generic and have not been developed and calibrated to represent specific case studies. We believe that applying and calibrating these type of models to real world case studies can help us to further develop our understanding about the phenomena that occur in these systems. In this paper we propose a method to estimate the parameter values of a socio-hydrological model and we test it by applying it to an artificial case study. We postulate a model that describes the feedbacks between floods, awareness and preparedness. After simulating hypothetical time series with a given combination of parameters, we sample few data points for our variables and try to estimate the parameters given these data points using Bayesian Inference. The results show that, if we are able to collect data for our case study, we would, in theory, be able to estimate the parameter values for our socio-hydrological flood model
The role of flood wave superposition in the severity of large floods
Abstract. The severity of floods is shaped not only by event- and catchment-specific characteristics but also depends on the river network
configuration. At the confluence of relevant tributaries with the main
river, flood event characteristics may change depending on the magnitude
and temporal match of flood waves. This superposition of flood
waves may potentially increase the flood severity downstream in the main
river. However, this aspect has not been analysed for a large set
of river confluences to date. To fill this gap, the role of flood wave superposition in the flood
severity at downstream gauges is investigated in four large
river basins in Germany and Austria (the Elbe, the Danube, the Rhine and
the Weser). A novel methodological approach to analyse flood wave
superposition is presented and applied to mean daily discharge data from
37 triple points. A triple point consists of three gauges: one in the
tributary as well as one upstream and downstream of the confluence with the
main river respectively. At the triple points, differences and similarities in
flood wave characteristics between the main river and the tributary are
analysed in terms of the temporal match and the magnitudes of flood peaks. At many of the confluences analysed, the tributary peaks consistently arrive
earlier than the main river peaks, although high variability in the
time lag is generally detected. No large differences in temporal matching are
detected for floods of different magnitudes. In the majority of
cases, the largest floods at the downstream gauge do not occur due to
perfect temporal match between the tributary and the main river. In terms of
spatial variability, the impact of flood wave superposition is
site-specific. Characteristic patterns of flood wave superposition are
detected for flood peaks in the Danube River, where peak discharges
largely increase due to inflow from alpine tributaries. Overall, we
conclude that the superposition of flood waves is not the driving
factor behind flood peak severity at the major confluences in Germany; however,
a few confluences show the potential for strong flood magnifications if a temporal shift in flood waves was to occur
Large-scale stochastic flood hazard analysis applied to the Po River
Reliable hazard analysis is crucial in the flood risk management of river basins. For the floodplains of large, developed rivers, flood hazard analysis often needs to account for the complex hydrology of multiple tributaries and the potential failure of dikes. Estimating this hazard using deterministic methods ignores two major aspects of large-scale risk analysis: the spatial–temporal variability of extreme events caused by tributaries, and the uncertainty of dike breach development. Innovative stochastic methods are here developed to account for these uncertainties and are applied to the Po River in Italy. The effects of using these stochastic methods are compared against deterministic equivalents, and the methods are combined to demonstrate applications for an overall stochastic hazard analysis. The results show these uncertainties can impact extreme event water levels by more than 2 m at certain channel locations, and also affect inundation and breaching patterns. The combined hazard analysis allows for probability distributions of flood hazard and dike failure to be developed, which can be used to assess future flood risk management measures
Probabilistic flood hazard mapping: effects of uncertain boundary conditions
Comprehensive flood risk assessment studies should quantify the global uncertainty in flood hazard estimation, for instance by mapping inundation extents together with their confidence intervals. This appears of particular importance in the case of flood hazard assessments along dike-protected reaches, where the possibility of occurrence of dike failures may considerably enhance the uncertainty. We present a methodology to derive probabilistic flood maps in dike-protected flood prone areas, where several sources of uncertainty are taken into account. In particular, this paper focuses on a 50 km reach of River Po (Italy) and three major sources of uncertainty in hydraulic modelling and flood mapping: uncertainties in the (i) upstream and (ii) downstream boundary conditions, and (iii) uncertainties in dike failures. Uncertainties in the definition of upstream boundary conditions (i.e. design-hydrographs) are assessed through a copula-based bivariate analysis of flood peaks and volumes. Uncertainties in the definition of downstream boundary conditions are characterised by uncertainty in the rating curve with confidence intervals which reflect discharge measurement and interpolation errors. The effects of uncertainties in boundary conditions and randomness of dike failures are assessed by means of the Inundation Hazard Assessment Model (IHAM), a recently proposed hybrid probabilistic-deterministic model that considers three different dike failure mechanisms: overtopping, piping and micro-instability due to seepage. The results of the study show that the IHAM-based analysis enables probabilistic flood hazard mapping and provides decision-makers with a fundamental piece of information for devising and implementing flood risk mitigation strategies in the presence of various sources of uncertainty
CEDIM Risk Explorer ? a map server solution in the project "Risk Map Germany"
International audienceThe project "Risk Map Germany" at the Center for Disaster Management and Risk Reduction Technology (CEDIM) aims at visualizing hazards, vulnerabilities and risks associated with natural and man made hazards. CEDIM as an interdisciplinary project unified various expertise like earthquake, storm and flood disaster research. Our aim was to visualize the manifold data exploration in thematic maps. The implemented Web-GIS solution "CEDIM Risk Explorer" represents the map visualizations of the different risk research. This Web-GIS integrates results from interdisciplinary work as maps of hazard, vulnerability and risk in one application and offers therefore new cognitions to the user by enabling visual comparisons. The present paper starts with a project introduction and a literature review of distributed GIS environments. Further the methods of map realization and visualization in the selected technical solution is worked out. Finally, the conclusions give the perspectives for future developments to the "CEDIM Risk Explorer"
Stochastic generation of spatially coherent river discharge peaks for continental event-based flood risk assessment
We present a new method to generate spatially coherent river discharge peaks
over multiple river basins, which can be used for continental event-based
probabilistic flood risk assessment. We first extract extreme events from
river discharge time series data over a large set of locations by applying
new peak identification and peak-matching methods. Then we describe these
events using the discharge peak at each location while accounting for the
fact that the events do not affect all locations. Lastly we fit the
state-of-the-art multivariate extreme value distribution to the discharge
peaks and generate from the fitted model a large catalogue of spatially
coherent synthetic event descriptors. We demonstrate the capability of this
approach in capturing the statistical dependence over all considered
locations. We also discuss the limitations of this approach and investigate
the sensitivity of the outcome to various model parameters.</p
- …