Study of the machinability of an Inconel 625 composite with added NiTi-TiB2 fabricated by direct laser deposition

This work studies the process feasibility of milling a metal-matrix composite based on Inconel 625 with added NiTi-TiB2 fabricated by direct laser deposition. The composite is intended for manufacturing turbine blades and it has strength characteristics on par with those of Inconel 625. However, the addition of TiB2 has improved its heat and wear resistance. This material is new, and its machinability has not been studied. The new composite was milled with end mill cutters, and recommendations were worked out on the cutting speed, feed per tooth, cutter flank angle, as well as depth and width of milling. The wear of cutter teeth flank was more intense. After the flank wear land on the back surface of a tooth had reached 0.11–0.15 mm, there was a sharp increase in the forces applied which was followed by brittle fracture of the tooth. Milling at a speed of 25 m/min ensured 28 min of stable operation. However, afterwards the critical wear value of 0.11 mm was quickly approached at a cutting speed of 50 m/min, and critical wear followed after 14 min.я Dependencies of the cutting forces vs. time for all the selected cutting speeds and throughout the entire testing time period have a tendency to increase, which indicates the influence of cutter wear on the cutting forces. It was found that the durability of the cutters increases with an increase in the milling width and a decrease in the milling depth

Application of deep convolutional and long short-term memory neural networks to red blood cells motion detection and velocity approximation

The paper deals with processing data obtained using nailfold high-speed videocapillaroscopy. To detect the red blood cells velocity two approaches are used. The deterministic approach is based on pixel intensities analysis for object detection and calculation of the displacement and velocity of red blood cells in a capillary. The obtained data formulate targets for the second approach. The stochastic approach is based on a sequence of artificial neural networks. The semantic segmentation network UNet is used for capillary detection. Then, the classification network GoogLeNet or ResNet is used as a feature extractor to convert masked video frames to a sequence of feature vectors. And finally, the long short-term memory network is used to approximate the red blood cells velocity. The results demonstrated that the accuracy of the mean velocity approximation in the time range of several seconds is up to 0.96. But the accuracy at each specific time moment is less accurate. So, the proposed algorithm allows the determination of the RBCs mean velocity but it doesn't allow determination of the RBCs pulsations accurate enough

Worldline Superfield Actions for N=2 Superparticles

We propose doubly supersymmetric actions in terms of n=2(D-2) worldline superfields for N=2 superparticles in D=3,4 and Type IIA D=6 superspaces. These actions are obtained by dimensional reduction of superfield actions for N=1 superparticles in D=4,6 and 10, respectively. We show that in all these models geometrodynamical constraints on target superspace coordinates do not put the theory on the mass shell, so the actions constructed consistently describe the dynamics of the corresponding N=2 superparticles. We also find that in contrast to the IIA D=6 superparticle a chiral IIB D=6 superparticle, which is not obtainable by dimensional reduction from N=1, D=10, is described by superfield constraints which produce dynamical equations. This implies that for the IIB D=6 superparticle the doubly supersymmetric action does not exist in the conventional form.Comment: Latex, 20 pp. Minor corrections, acknowledgements adde

Vanadium oxide - poly(3,4-ethylenedioxythiophene) cathodes for zinc-ion batteries: effect of synthesis temperature

Vanadium oxide composites with conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) were obtained by one-step microwave-assisted hydrothermal synthesis at two different temperatures: 120 and 170 °C (denoted as V-120 and V-170, respectively). The structure and composition of the obtained samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, X-ray photoelectron spectro­scopy (XPS), and thermogravimetric (TG) analysis. The detailed study of the electro­chemical properties of the composites as cathodes of aqueous zinc-ion battery was per­formed by cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) at different current densities and by electrochemical impedance spectroscopy (EIS). It was shown that V-120 demonstrated excellent electrochemical performance in the 0.3 to 1.4 V vs. Zn/Zn2+ potential range reaching specific capacities of up to 390 mA∙h∙g−1 at 0.3 A∙g−1 with excel­lent capacity stability after 1000 charge-discharge cycles. Its functional parameters were found to be much better than those of the electrodes based on the V-170 composite obtained at a higher temperature. The effect of the synthesis temperature on the electro­chemical properties is discussed in terms of the crystallographic, compositional, and thermogravimetric properties of the samples

Spark discharge synthesis of semiconductor nanoparticles for thick-film metal oxide gas sensors

Traditional methods of synthesis of metal-oxide gas sensing materials for semiconductor sensors are based on wet sol-gel processes. However, these processes lead to the formation of hydroxyl groups on the surface of oxide particles being responsible for the strong response of a sensing material to humidity. In this work, we investigated the possibility to synthesize metal-oxide materials with reduced sensitivity to water vapors. Dry synthesis of SnO2 nanoparticles was implemented in the gas phase by spark discharge, which allowed us to produce powder with specific surface area of about 40 m2/g after additional annealing at 610 °C. The drop of sensor resistance does not exceed 20%, when air humidity increases from 40 to 100%, whereas the response to 100 ppm of hydrogen is of a factor of 8 with very short response time of about 1 s

Enabling propagation of anisotropic polaritons along forbidden directions via a topological transition

Recent discoveries of polaritons in van der Waals (vdW) crystals with directional in-plane propagation, ultra-low losses, and broad spectral tunability have opened the door for unprecedented manipulation of the flow of light at the nanoscale. However, despite their extraordinary potential for nano-optics, these unique polaritons also present an important limitation: their directional propagation is intrinsically determined by the crystal structure of the host material, which imposes forbidden directions of propagation and hinders its control. Here, we theoretically predict and experimentally demonstrate that directional polaritons (in-plane hyperbolic phonon polaritons) in a vdW biaxial slab (alpha-phase molybdenum trioxide) can be steered along previously forbidden directions by inducing an optical topological transition, which naturally emerges when placing the slab on a substrate with a given negative permittivity (4H-SiC). Importantly, due to the low-loss nature of this topological transition, we are able to visualize in real space exotic intermediate polaritonic states between mutually orthogonal hyperbolic regimes, which permit to unveil the unique topological origin of the transition. This work provides new insights into the emergence of low-loss optical topological transitions in vdW crystals, offering a novel route to efficiently steer the flow of energy at the nanoscale

Broadband optical properties of monolayer and bulk MoS2

Layered semiconductors such as transition metal dichalcogenides (TMDs) offer endless possibilities for designing modern photonic and optoelectronic components. However, their optical engineering is still a challenging task owing to multiple obstacles, including the absence of a rapid, contactless, and the reliable method to obtain their dielectric function as well as to evaluate in situ the changes in optical constants and exciton binding energies. Here, we present an advanced approach based on ellipsometry measurements for retrieval of dielectric functions and the excitonic properties of both monolayer and bulk TMDs. Using this method, we conduct a detailed study of monolayer MoS2 and its bulk crystal in the broad spectral range (290–3300 nm). In the near- and mid-infrared ranges, both configurations appear to have no optical absorption and possess an extremely high dielectric permittivity making them favorable for lossless subwavelength photonics. In addition, the proposed approach opens a possibility to observe a previously unreported peak in the dielectric function of monolayer MoS2 induced by the use of perylene-3,4,9,10-tetracarboxylic acid tetrapotassium salt (PTAS) seeding promoters for MoS2 synthesis and thus enables its applications in chemical and biological sensing. Therefore, this technique as a whole offers a state-of-the-art metrological tool for next-generation TMD-based devices

Focusing of in-plane hyperbolic polaritons in van der Waals crystals with tailored infrared nanoantennas

Phonon polaritons (PhPs),light coupled to lattice vibrations,with in-plane hyperbolic dispersion exhibit ray-like propagation with large wavevectors and enhanced density of optical states along certain directions on a surface. As such, they have raised a surge of interest as they promise unprecedented possibilities for the manipulation of infrared light with planar circuitry and at the nanoscale. Here, we demonstrate, for the first time, the focusing of in-plane hyperbolic PhPs propagating along thin slabs of MoO3. To that end, we developed metallic nanoantennas of convex geometries for both the efficient launching and focusing of the polaritons. Remarkably, the foci obtained exhibit enhanced near-field confinement and absorption compared to foci produced by in-plane isotropic PhPs. More intriguingly, foci sizes as small as lamdap/5 =lamda0/50 were achieved (lamdap is the polariton wavelength and lamda0 the photon wavelength). Focusing of in-plane hyperbolic polaritons introduces a first and most basic building block developing planar polariton optics utilizing in-plane anisotropic van der Waals materials and metasurfaces

Transition metal dichalcogenide nanospheres for high-refractive-index nanophotonics and biomedical theranostics

Recent developments in the area of resonant dielectric nanostructures have created attractive opportunities for concentrating and manipulating light at the nanoscale and the establishment of the new exciting field of all-dielectric nanophotonics. Transition metal dichalcogenides (TMDCs) with nanopatterned surfaces are especially promising for these tasks. Still, the fabrication of these structures requires sophisticated lithographic processes, drastically complicating application prospects. To bridge this gap and broaden the application scope of TMDC nanomaterials, we report here femtosecond laser-ablative fabrication of water-dispersed spherical TMDC (MoS2 and WS2) nanoparticles (NPs) of variable size (5 to 250 nm). Such NPs demonstrate exciting optical and electronic properties inherited from TMDC crystals, due to preserved crystalline structure, which offers a unique combination of pronounced excitonic response and high refractive index value, making possible a strong concentration of electromagnetic field in the NPs. Furthermore, such NPs offer additional tunability due to hybridization between the Mie and excitonic resonances. Such properties bring to life a number of nontrivial effects, including enhanced photoabsorption and photothermal conversion. As an illustration, we demonstrate that the NPs exhibit a very strong photothermal response, much exceeding that of conventional dielectric nanoresonators based on Si. Being in a mobile colloidal state and exhibiting superior optical properties compared to other dielectric resonant structures, the synthesized TMDC NPs offer opportunities for the development of next-generation nanophotonic and nanotheranostic platforms, including photothermal therapy and multimodal bioimaging