Light-Induced Manipulation of Passive and Active Microparticles

We consider sedimented at a solid wall particles that are immersed in water containing small additives of photosensitive ionic surfactants. It is shown that illumination with an appropriate wavelength, a beam intensity profile, shape and size could lead to a variety of dynamic, both unsteady and steady-state, configurations of particles. These dynamic, well-controlled and switchable particle patterns at the wall are due to an emerging diffusio-osmotic flow that takes its origin in the adjacent to the wall electrostatic diffuse layer, where the concentration gradients of surfactant are induced by light. The conventional nonporous particles are passive and can move only with already generated flow. However, porous colloids actively participate themselves in the flow generation mechanism at the wall, which also sets their interactions that can be very long ranged. This light-induced diffusio-osmosis opens novel avenues to manipulate colloidal particles and assemble them to various patterns. We show in particular how to create and split optically the confined regions of particles of tunable size and shape, where well controlled flow-induced forces on the colloids could result in their cristalline packing, formation of dilute lattices of well-separated particles, and other states.Comment: 11 pages, 14 figure

Multi-functional oilfield production chemicals: maleic-based polymers for gas hydrate and corrosion inhibition

Several chemical problems can occur during the production of oil and gas through flow lines. This includes corrosion, scale deposition and gas hydrate plugging. Three separate chemicals may be needed to treat these issues. Kinetic hydrate inhibitors (KHIs) are used in cold oil or natural gas production flow lines to prevent the formation and plugging of the line with gas hydrates. They are often injected concomitantly with other production chemicals such as corrosion and scale inhibitors. KHIs are specific low molecular weight water-soluble polymers with amphiphilic groups formulated with synergists and solvents. However, many corrosion inhibitors (CIs) are antagonistic to the KHI polymer, severely reducing the KHI performance. It would be preferable and economic if the KHI also could act as a CI. We have explored the use of maleic-based copolymers as KHIs as well as their use as film-forming CIs. KHIs were tested using a natural gas mixture in high pressure rocking cells using the slow constant cooling test method. A terpolymer from reaction of vinyl acetate:maleic anhydride copolymer with cyclohexy lamine and 3,3-di-n-butylaminopropylamine (VA:MA-60% cHex-40% DBAPA), gave excellent performance as a KHI, better than the commercially available poly(N-vinyl caprolactam) (PVCap). CO2 corrosion inhibition was measured by Linear Polarization Resistance (LPR) in a 1 litre CO2 bubble test equipment using C1018 steel coupons. The new terpolymer gave good CO2 corrosion inhibition in 3.6 wt% brine, significantly better than PVCap, but not as good as a commercial imidazoline-based surfactant corrosion inhibitor. The terpolymer also showed good corrosion inhibition efficiency at high salinity conditions, (density 1.12 g/cm3). VA:MA-60% cHex-40% DBAPA shifted the open-circuit potential to more positive values and significantly decreased the corrosion rate.publishedVersio

Effect of gold nanocomposites treatment on male reproductive function under conditions of experimental hyperglycemia

Background: Given the urgency of the problem of clinical and experimental pathology of diabetes mellitus (DM) and the reproductive function disorders and their correction, the direction of research was determined in the following way: to establish the functional state of testicular cells and appendages under experimental hyperglycemia, and to assess future prospects for gold nanoparticles for clinical trials. The aims to evaluate the effect of five times treatment with gold nanocomposites (gold nanoparticles (AuNPs) in the polymer matrix D-g-PAA(PE) on male reproductive function under conditions of experimental hyperglycemia.Methods: Experiments (two series) have been conducted on 120 (60 males and 60 females) Albino white laboratory mice (weighing 25-30 gm). Experimental hyperglycemia, a model of type 2 diabetes mellitus (DM2) was reproduced by administration of nicotinamide and streptozotocin (internally peritoneally). The treatment of substances was carried out in the following way: D-g-PAA (PE) (10.00 mg/kg), D-g-PAA (PE)/AuNPs (9.78 mg/kg) in the tail vein, in 0.3 ml, once a day, five times, 2 weeks after EG induction once a day, five times.Results: it was established for the first time that there is disorder of male reproductive function under conditions of experimental hyperglycemia and five-fold treatment of gold nanocomposites (D-g-PAA(PE)/AuNPs, namely an increase in the number of abnormal sperm and a decrease in spermatids, as well as an increase in preimplantation mortality of embryos (compared to this value under experimental hyperglycemia).Conclusions: Our new data suggest that treatment with such gold nanocomposites (gold nanoparticles in D-g-PAA (PE) polymer matrix) are not critical for therapeutic use (in photodynamic chemotherapy), even in hyperglycemia when there is diabetes

Performance of Waterborne Polyurethanes in Inhibition of Gas Hydrate Formation and Corrosion: Influence of Hydrophobic Fragments

The design of new dual-function inhibitors simultaneously preventing hydrate formation and corrosion is a relevant issue for the oil and gas industry. The structure-property relationship for a promising class of hybrid inhibitors based on waterborne polyurethanes (WPU) was studied in this work. Variation of diethanolamines differing in the size and branching of N-substituents (methyl, n-butyl, and tert-butyl), as well as the amount of these groups, allowed the structure of polymer molecules to be preset during their synthesis. To assess the hydrate and corrosion inhibition efficiency of developed reagents pressurized rocking cells, electrochemistry and weight-loss techniques were used. A distinct effect of these variables altering the hydrophobicity of obtained compounds on their target properties was revealed. Polymers with increased content of diethanolamine fragments with n- or tert-butyl as N-substituent (WPU-6 and WPU-7, respectively) worked as dual-function inhibitors, showing nearly the same efficiency as commercial ones at low concentration (0.25 wt%), with the branched one (tert-butyl; WPU-7) turning out to be more effective as a corrosion inhibitor. Commercial kinetic hydrate inhibitor Luvicap 55 W and corrosion inhibitor Armohib CI-28 were taken as reference samples. Preliminary study reveals that WPU-6 and WPU-7 polyurethanes as well as Luvicap 55 W are all poorly biodegradable compounds; BODt/CODcr (ratio of Biochemical oxygen demand and Chemical oxygen demand) value is 0.234 and 0.294 for WPU-6 and WPU-7, respectively, compared to 0.251 for commercial kinetic hydrate inhibitor Luvicap 55 W. Since the obtained polyurethanes have a bifunctional effect and operate at low enough concentrations, their employment is expected to reduce both operating costs and environmental impact.publishedVersio

Effective Inhibition of Carbon Steel Corrosion by Waterborne Polyurethane Based on N-<i>tert</i>-Butyl Diethanolamine in 2M HCl: Experimental and Computational Findings

The efficiency of corrosion inhibition for waterborne polyurethane based on N-tert-butyl diethanolamine (tB-WPU) is investigated using different techniques. Corrosion weight loss, open circuit potential experiments, electrochemical impedance spectroscopy, and potentiodynamic polarization measurements show that both a commercial reagent and a polyurethane-based inhibitor prevent corrosion at increasing temperature to 50 °C. At 75 °C, the activity of both reagents is reduced. In stirring conditions, the effectiveness of acid corrosion inhibition (25 °C, 500 ppm) drops abruptly from 89.5% to 60.7%, which is related presumably to the complexity of binding the polymer molecules to the metal surface. As follows from thermodynamic calculations, the adsorption of tB-WPU on the metal surface in 2M HCl can be treated as a physisorption. Model quantum–chemical calculations support the experimental studies and elucidate the nature of steel surface–inhibitor molecule chemical bond, which is realized mainly by carboxyl and amino groups. It is concluded that WPUs can be considered as a perspective alternative to commercial oilfield reagents due to their versatility

Association of the VEGFR2 gene His472Gln polymorphism with endurance-related phenotypes.

Vascular endothelial growth factor receptor 2 (VEGFR2) is essential to induce the full spectrum of VEGF angiogenic responses to aerobic training. In the present study, we examined the impact of the functional His472Gln polymorphism of the VEGFR2 gene on elite athlete status, endurance performance and muscle fibre type composition. Four hundred and seventy-one Russian athletes were prospectively stratified into four groups according to event duration, distance and type of activity, covering a spectrum from the more endurance-oriented to the more power-oriented. VEGFR2 genotype and allele frequencies were compared to 603 controls. To examine the association between VEGFR2 genotype and fibre type composition, vastus lateralis muscle biopsies were obtained from 45 physically active healthy men and 23 all-round speed skaters. In addition, 76 competitive rowers performed incremental endurance exercise to allow analysis of genotype associations with exercise responses. We found that the frequency of the VEGFR2 472Gln allele was significantly higher in endurance-oriented athletes compared to controls (36.8 vs. 27.4%, P = 0.0006). Relative VO(2max) was significantly greater in the VEGFR2 472Gln allele carriers compared with the His/His homozygotes of the sub-elite female rower group only. Genotype-specific differences were found for the proportion of slow-twitch fibres in both athletes and controls, which was approximately 10.1 and approximately 7.4% higher in the His/Gln and Gln/Gln genotypes than in the His/His genotype group, respectively. In conclusion, we have shown for the first time that variation in the VEGFR2 gene is associated with elite athlete status, endurance performance of female rowers and muscle fibre type composition

Performance of Waterborne Polyurethanes in Inhibition of Gas Hydrate Formation and Corrosion: Influence of Hydrophobic Fragments

The design of new dual-function inhibitors simultaneously preventing hydrate formation and corrosion is a relevant issue for the oil and gas industry. The structure-property relationship for a promising class of hybrid inhibitors based on waterborne polyurethanes (WPU) was studied in this work. Variation of diethanolamines differing in the size and branching of N-substituents (methyl, n-butyl, and tert-butyl), as well as the amount of these groups, allowed the structure of polymer molecules to be preset during their synthesis. To assess the hydrate and corrosion inhibition efficiency of developed reagents pressurized rocking cells, electrochemistry and weight-loss techniques were used. A distinct effect of these variables altering the hydrophobicity of obtained compounds on their target properties was revealed. Polymers with increased content of diethanolamine fragments with n- or tert-butyl as N-substituent (WPU-6 and WPU-7, respectively) worked as dual-function inhibitors, showing nearly the same efficiency as commercial ones at low concentration (0.25 wt%), with the branched one (tert-butyl; WPU-7) turning out to be more effective as a corrosion inhibitor. Commercial kinetic hydrate inhibitor Luvicap 55 W and corrosion inhibitor Armohib CI-28 were taken as reference samples. Preliminary study reveals that WPU-6 and WPU-7 polyurethanes as well as Luvicap 55 W are all poorly biodegradable compounds; BODt/CODcr (ratio of Biochemical oxygen demand and Chemical oxygen demand) value is 0.234 and 0.294 for WPU-6 and WPU-7, respectively, compared to 0.251 for commercial kinetic hydrate inhibitor Luvicap 55 W. Since the obtained polyurethanes have a bifunctional effect and operate at low enough concentrations, their employment is expected to reduce both operating costs and environmental impact

Camelid VHHs Fused to Human Fc Fragments Provide Long Term Protection Against Botulinum Neurotoxin A in Mice

The bacterium Clostridium botulinum is the causative agent of botulism&mdash;a severe intoxication caused by botulinum neurotoxin (BoNT) and characterized by damage to the nervous system. In an effort to develop novel C. botulinum immunotherapeutics, camelid single-domain antibodies (sdAbs, VHHs, or nanobodies) could be used due to their unique structure and characteristics. In this study, VHHs were produced using phage display technology. A total of 15 different monoclonal VHHs were selected based on their comlementarity-determining region 3 (CDR3) sequences. Different toxin lethal dose (LD50) challenges with each selected phage clone were conducted in vivo to check their neutralizing potency. We demonstrated that modification of neutralizing VHHs with a human immunoglobulin G (IgG)1 Fc (fragment crystallizable) fragment (fusionbody, VHH-Fc) significantly increased the circulation time in the blood (up to 14 days). At the same time, VHH-Fc showed the protective activity 1000 times higher than monomeric form when challenged with 5 LD50. Moreover, VHH-Fcs remained protective even 14 days after antibody administration. These results indicate that this VHH-Fc could be used as an effective long term antitoxin protection against botulinum type A