The alkaline reaction of FEBEX bentonite: a contribution to the study of the performance of bentonite/concrete engineered barrier system

Desde 1997, el desarrollo de dos proyectos de la Unión Europea, Effects of Cement On CLAY barrier performance (ECOCLAY, 1997-2000) y ECOCLAY phase II (2000-2003), ha permitido abordar la investigación del efecto de la pluma alcalina inducida por la lixiviación del hormigón sobre la bentonita. Ambos materiales forman parte de un concepto de barrera compuesta de hormigón y bentonita, en el contexto del almacenamiento de residuos a una profundidad dada. El grupo de geoquímica aplicada a las arcillas de la Universidad Autónoma de Madrid (UAM) ha participado en ambos proyectos, y ha conseguido aportar experiencia y cono¬cimiento al estudio del comportamiento de la bentonita de referencia española (FEBEX) bajo condiciones de elevada alcalinidad. Este artículo ofrece una síntesis del trabajo desarrollado, mencionando las lecciones aprendidas sobre la reactividad alcalina de la bentonita, y su enfoque práctico hacia el análisis del comportamiento de uno de los conceptos de referencia, el almacenamiento de residuos en formaciones arcillosas. Se han seleccionado las principales contribuciones científicas a este respecto, a juicio de los autores: (1) la naturaleza particular de los productos generados en la reacción alcalina de la bentonita FEBEX (zeolitas, arcillas magnésicas y geles de silicato aluminato cálcico hidratado (CASH)); (2) la aproximación mediante mineralogía cuantitativa al ritmo de reacción de la montmorillonita FEBEX a pHs elevados, y (3) la validación experimental de la reactividad alcalina de la bentonita a partir de experimentos en columna

II Workshop on Modeling and Simulation for Science and Engineering

II Workshop on Modeling and Simulation for Science and Engineering (II WMSSE) was a conference conducted at Universidad Tecnológica de Bolívar, in the city of Cartagena de Indias, Colombia, on September 24, 25 and 26, 2019. There, works in several topics of science, technology and engineering were presented. Specially, the participants of conference wanted to bring some solutions to the actual industrial requirements such as improvement and optimization of the heat transfer equipment, electronic devices, system control by mean of computational modeling. Also, dynamic system control was widely used for the prediction of power flow market, diffusion of bacteria in coffee production, stress concentration in industrial machines, analysis of population dynamics, model of hydrological and pluviometric networks, encryption for intercommunication of substation control centers, and others

Diabetes-related excess mortality in Mexico: a comparative analysis of National Death Registries between 2017-2019 and 2020

OBJECTIVE: To estimate diabetes-related mortality in Mexico in 2020 compared with 2017-2019 after the onset of the coronavirus disease 2019 (COVID-19) pandemic. RESEARCH DESIGN AND METHODS: This retrospective, state-level study used national death registries of Mexican adults aged ≥20 years for the 2017-2020 period. Diabetes-related death was defined using ICD-10 codes listing diabetes as the primary cause of death, excluding certificates with COVID-19 as the primary cause of death. Spatial and negative binomial regression models were used to characterize the geographic distribution and sociodemographic and epidemiologic correlates of diabetes-related excess mortality, estimated as increases in diabetes-related mortality in 2020 compared with average 2017-2019 rates. RESULTS: We identified 148,437 diabetes-related deaths in 2020 (177 per 100,000 inhabitants) vs. an average of 101,496 deaths in 2017-2019 (125 per 100,000 inhabitants). In-hospital diabetes-related deaths decreased by 17.8% in 2020 versus 2017-2019, whereas out-of-hospital deaths increased by 89.4%. Most deaths were attributable to type 2 diabetes (130 per 100,000 inhabitants). Compared with 2018-2019 data, hyperglycemic hyperosmolar state and diabetic ketoacidosis were the two contributing causes with the highest increase in mortality (128% and 116% increase, respectively). Diabetes-related excess mortality clustered in southern Mexico and was highest in states with higher social lag, rates of COVID-19 hospitalization, and prevalence of HbA1c ≥7.5%. CONCLUSIONS: Diabetes-related deaths increased among Mexican adults by 41.6% in 2020 after the onset of the COVID-19 pandemic, occurred disproportionately outside the hospital, and were largely attributable to type 2 diabetes and hyperglycemic emergencies. Disruptions in diabetes care and strained hospital capacity may have contributed to diabetes-related excess mortality in Mexico during 2020

IFNγ Response to Mycobacterium tuberculosis, Risk of Infection and Disease in Household Contacts of Tuberculosis Patients in Colombia

OBJECTIVES: Household contacts (HHCs) of pulmonary tuberculosis patients are at high risk of Mycobacterium tuberculosis infection and early disease development. Identification of individuals at risk of tuberculosis disease is a desirable goal for tuberculosis control. Interferon-gamma release assays (IGRAs) using specific M. tuberculosis antigens provide an alternative to tuberculin skin testing (TST) for infection detection. Additionally, the levels of IFNgamma produced in response to these antigens may have prognostic value. We estimated the prevalence of M. tuberculosis infection by IGRA and TST in HHCs and their source population (SP), and assessed whether IFNgamma levels in HHCs correlate with tuberculosis development. METHODS: A cohort of 2060 HHCs was followed for 2-3 years after exposure to a tuberculosis case. Besides TST, IFNgamma responses to mycobacterial antigens: CFP, CFP-10, HspX and Ag85A were assessed in 7-days whole blood cultures and compared to 766 individuals from the SP in Medellín, Colombia. Isoniazid prophylaxis was not offered to child contacts because Colombian tuberculosis regulations consider it only in children under 5 years, TST positive without BCG vaccination. RESULTS: Using TST 65.9% of HHCs and 42.7% subjects from the SP were positive (OR 2.60, p<0.0001). IFNgamma response to CFP-10, a biomarker of M. tuberculosis infection, tested positive in 66.3% HHCs and 24.3% from the SP (OR = 6.07, p<0.0001). Tuberculosis incidence rate was 7.0/1000 person years. Children <5 years accounted for 21.6% of incident cases. No significant difference was found between positive and negative IFNgamma responders to CFP-10 (HR 1.82 95% CI 0.79-4.20 p = 0.16). However, a significant trend for tuberculosis development amongst high HHC IFNgamma producers was observed (trend Log rank p = 0.007). DISCUSSION: CFP-10-induced IFNgamma production is useful to establish tuberculosis infection prevalence amongst HHC and identify those at highest risk of disease. The high tuberculosis incidence amongst children supports administration of chemoprophylaxis to child contacts regardless of BCG vaccination

External validation of prognostic models to predict stillbirth using the International Prediction of Pregnancy Complications (IPPIC) Network database: an individual participant data meta-analysis

Objective Stillbirth is a potentially preventable complication of pregnancy. Identifying women at high risk of stillbirth can guide decisions on the need for closer surveillance and timing of delivery in order to prevent fetal death. Prognostic models have been developed to predict the risk of stillbirth, but none has yet been validated externally. In this study, we externally validated published prediction models for stillbirth using individual participant data (IPD) meta-analysis to assess their predictive performance. Methods MEDLINE, EMBASE, DH-DATA and AMED databases were searched from inception to December 2020 to identify studies reporting stillbirth prediction models. Studies that developed or updated prediction models for stillbirth for use at any time during pregnancy were included. IPD from cohorts within the International Prediction of Pregnancy Complications (IPPIC) Network were used to validate externally the identified prediction models whose individual variables were available in the IPD. The risk of bias of the models and cohorts was assessed using the Prediction study Risk Of Bias ASsessment Tool (PROBAST). The discriminative performance of the models was evaluated using the C-statistic, and calibration was assessed using calibration plots, calibration slope and calibration-in-the-large. Performance measures were estimated separately in each cohort, as well as summarized across cohorts using random-effects meta-analysis. Clinical utility was assessed using net benefit. Results Seventeen studies reporting the development of 40 prognostic models for stillbirth were identified. None of the models had been previously validated externally, and the full model equation was reported for only one-fifth (20%, 8/40) of the models. External validation was possible for three of these models, using IPD from 19 cohorts (491 201 pregnant women) within the IPPIC Network database. Based on evaluation of the model development studies, all three models had an overall high risk of bias, according to PROBAST. In the IPD meta-analysis, the models had summary C-statistics ranging from 0.53 to 0.65 and summary calibration slopes ranging from 0.40 to 0.88, with risk predictions that were generally too extreme compared with the observed risks. The models had little to no clinical utility, as assessed by net benefit. However, there remained uncertainty in the performance of some models due to small available sample sizes. Conclusions The three validated stillbirth prediction models showed generally poor and uncertain predictive performance in new data, with limited evidence to support their clinical application. The findings suggest methodological shortcomings in their development, including overfitting. Further research is needed to further validate these and other models, identify stronger prognostic factors and develop more robust prediction models. (c) 2021 The Authors. Ultrasound in Obstetrics & Gynecology published by John Wiley & Sons Ltd on behalf of International Society of Ultrasound in Obstetrics and Gynecology.Peer reviewe

Enhanced production of Λb0\Lambda_{b}^{0} baryons in high-multiplicity pppp collisions at s=13\sqrt{s} = 13 TeV

The production rate of $\Lambda_{b}^{0}$ baryons relative to $B^{0}$ mesons in $pp$ collisions at a center-of-mass energy $\sqrt{s} = 13$ TeV is measured by the LHCb experiment. The ratio of $\Lambda_{b}^{0}$ to $B^{0}$ production cross-sections shows a significant dependence on both the transverse momentum and the measured charged-particle multiplicity. At low multiplicity, the ratio measured at LHCb is consistent with the value measured in $e^{+}e^{-}$ collisions, and increases by a factor of $\sim2$ with increasing multiplicity. At relatively low transverse momentum, the ratio of $\Lambda_{b}^{0}$ to $B^{0}$ cross-sections is higher than what is measured in $e^{+}e^{-}$ collisions, but converges with the $e^{+}e^{-}$ ratio as the momentum increases. These results imply that the evolution of heavy $b$ quarks into final-state hadrons is influenced by the density of the hadronic environment produced in the collision. Comparisons with a statistical hadronization model and implications for the mechanisms enforcing quark confinement are discussed.Comment: All figures and tables, along with machine-readable versions and any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2023-027.html (LHCb public pages

Studies of η\eta and η′\eta' production in pppp and ppPb collisions

The production of $\eta$ and $\eta'$ mesons is studied in proton-proton and proton-lead collisions collected with the LHCb detector. Proton-proton collisions are studied at center-of-mass energies of $5.02$ and $13~{\rm TeV}$, and proton-lead collisions are studied at a center-of-mass energy per nucleon of $8.16~{\rm TeV}$. The studies are performed in center-of-mass rapidity regions $2.5<y_{\rm c.m.}<3.5$ (forward rapidity) and $-4.0<y_{\rm c.m.}<-3.0$ (backward rapidity) defined relative to the proton beam direction. The $\eta$ and $\eta'$ production cross sections are measured differentially as a function of transverse momentum for $1.5<p_{\rm T}<10~{\rm GeV}$ and $3<p_{\rm T}<10~{\rm GeV}$, respectively. The differential cross sections are used to calculate nuclear modification factors. The nuclear modification factors for $\eta$ and $\eta'$ mesons agree at both forward and backward rapidity, showing no significant evidence of mass dependence. The differential cross sections of $\eta$ mesons are also used to calculate $\eta/\pi^0$ cross section ratios, which show evidence of a deviation from the world average. These studies offer new constraints on mass-dependent nuclear effects in heavy-ion collisions, as well as $\eta$ and $\eta'$ meson fragmentation.Comment: All figures and tables, along with machine-readable versions and any supplementary material and additional information, are available at https://lhcbproject.web.cern.ch/Publications/p/LHCb-PAPER-2023-030.html (LHCb public pages

Fraction of χc\chi_c decays in prompt J/ψJ/\psi production measured in pPb collisions at sNN=8.16\sqrt{s_{NN}}=8.16 TeV

The fraction of $\chi_{c1}$ and $\chi_{c2}$ decays in the prompt $J/\psi$ yield, $F_{\chi c}=\sigma_{\chi_c \to J/\psi}/\sigma_{J/\psi}$, is measured by the LHCb detector in pPb collisions at $\sqrt{s_{NN}}=8.16$ TeV. The study covers the forward ($1.5<y^*<4.0$) and backward ($-5.0<y^*<-2.5$) rapidity regions, where $y^*$ is the $J/\psi$ rapidity in the nucleon-nucleon center-of-mass system. Forward and backward rapidity samples correspond to integrated luminosities of 13.6 $\pm$ 0.3 nb$^{-1}$ and 20.8 $\pm$ 0.5 nb$^{-1}$, respectively. The result is presented as a function of the $J/\psi$ transverse momentum $p_{T,J/\psi}$ in the range 1$<p_{T, J/\psi}<20$ GeV/$c$. The $F_{\chi c}$ fraction at forward rapidity is compatible with the LHCb measurement performed in $pp$ collisions at $\sqrt{s}=7$ TeV, whereas the result at backward rapidity is 2.4 $\sigma$ larger than in the forward region for $1<p_{T, J/\psi}<3$ GeV/$c$. The increase of $F_{\chi c}$ at low $p_{T, J/\psi}$ at backward rapidity is compatible with the suppression of the $\psi$(2S) contribution to the prompt $J/\psi$ yield. The lack of in-medium dissociation of $\chi_c$ states observed in this study sets an upper limit of 180 MeV on the free energy available in these pPb collisions to dissociate or inhibit charmonium state formation.Comment: All figures and tables, along with machine-readable versions and any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2023-028.html (LHCb public pages

Search for CP\textit{CP} violation in the phase space of D0→KS0K±π∓D^{0} \rightarrow K_{S}^{0} K^{\pm} \pi^{\mp} decays with the energy test

A search for $\textit{CP}$ violation in $D^{0} \rightarrow K_{S}^{0} K^{+} \pi^{-}$ and $D^{0} \rightarrow K_{S}^{0} K^{-} \pi^{+}$ decays is reported. The search is performed using an unbinned model-independent method known as the energy test that probes local $\textit{CP}$ violation in the phase space of the decays. The data analysed correspond to an integrated luminosity of $5.4~$fb$^{-1}$ collected in proton-proton collisions by the LHCb experiment at a centre-of-mass energy of $\sqrt{s}=13$~TeV, amounting to approximately 950000 and 620000 signal candidates for the $D^{0} \rightarrow K_{S}^{0} K^{-} \pi^{+}$ and $D^{0} \rightarrow K_{S}^{0} K^{+} \pi^{-}$ modes, respectively. The method is validated using $D^{0} \rightarrow K^{-} \pi^{+} \pi^{-} \pi^{+}$ and $D^{0} \rightarrow K_{S}^{0} \pi^{+} \pi^{-}$ decays, where $\textit{CP}$-violating effects are expected to be negligible, and using background-enhanced regions of the signal decays. The results are consistent with $\textit{CP}$ symmetry in both the $D^{0} \rightarrow K_{S}^{0} K^{-} \pi^{+}$ and the $D^{0} \rightarrow K_{S}^{0} K^{+} \pi^{-}$ decays, with $p$-values for the hypothesis of no $\textit{CP}$ violation of 70% and 66%, respectively.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2023-019.html (LHCb public pages