Alkali interactions with a calcium manganite oxygen carrier used in chemical looping combustion

Chemical-Looping Combustion (CLC) of biofuels is a promising technology for cost-efficient CO2 separation and can lead to negative CO2 emissions when combined with carbon capture and storage. A potential challenge in developing CLC technology is the effects of alkali metal-containing compounds released during fuel conversion. This study investigates the interactions between alkali and an oxygen carrier (OC), CaMn0.775Ti0.125Mg0.1O3-δ, to better understand the fate of alkali in CLC. A laboratory-scale fluidized bed reactor is operated at 800–900 \ub0C in oxidizing, reducing and inert atmospheres to mimic CLC conditions. Alkali is fed to the reactor as aerosol KCl particles, and alkali in the exhaust is measured online with a surface ionization detector. The alkali concentration changes with gas environment, temperature, and alkali loading, and the concentration profile has excellent reproducibility over repeated redox cycles. Alkali-OC interactions are dominated by alkali uptake under most conditions, except for a release during OC reduction. Uptake is significant during stable reducing conditions, and is limited under oxidizing conditions. The total uptake during a redox cycle is favored by a high alkali loading, while the influence of temperature is weak. The implications for the understanding of alkali behavior in CLC and further development are discussed

Alkali-wall interactions in a laboratory-scale reactor for chemical looping combustion studies

Alkali metal-containing compounds are readily released during thermal conversion of solid fuels, and may have both detrimental and beneficial effects on chemical looping combustion. Here, we characterize alkali interactions with the inner walls of a laboratory-scale reactor under oxidizing, reducing and inert conditions at temperatures up to 900 \ub0C. KCl aerosol particles are continuously introduced to the stainless steel reactor and the alkali concentration is measured on-line with a surface ionization detector. Aerosol particles evaporate at temperatures above 500 \ub0C and KCl molecules rapidly diffuse to the reactor wall. Up to 92% of the alkali reaching the wall below 700 \ub0C remains adsorbed, while re-evaporation is important at higher temperatures, where up to 74% remains adsorbed. Transient changes in alkali concentration are observed during repeated redox cycles, which are associated with changes in chemical composition of the wall material. Metal oxides on the reactor wall are partially depleted under reducing conditions, which allow for the formation of a new potassium-rich phase that is stable in a reducing atmosphere, but not under inert conditions. The observed wall effects are concluded to be extensive and include major transient effects depending on gas composition, and the implications for laboratory studies and improved experimental methodology are discussed

Internet-based cognitive behavior therapy for obsessive compulsive disorder: A pilot study

<p>Abstract</p> <p>Background</p> <p>Cognitive behavior therapy (CBT) is widely regarded as an effective treatment for obsessive compulsive disorder (OCD), but access to CBT therapists is limited. Internet-based CBT (ICBT) with therapist support is a way to increase access to CBT but has not been developed or tested for OCD. The aim of this study was to evaluate ICBT for OCD.</p> <p>Method</p> <p>An open trial where patients (N = 23) received a 15-week ICBT program with therapist support consisting of psychoeducation, cognitive restructuring and exposure with response prevention. The primary outcome was the Yale-Brown Obsessive Compulsive Scale (Y-BOCS), which was assessed by a psychiatrist before and immediately after treatment. Secondary outcomes were self-rated measures of OCD symptoms, depressive symptoms, general functioning, anxiety and quality of life. All assessments were made at baseline and post-treatment.</p> <p>Results</p> <p>All participants completed the primary outcome measure at all assessment points. There were reductions in OCD symptoms with a large within-group effect size (Cohen's <it>d </it>= 1.56). At post-treatment, 61% of participants had a clinically significant improvement and 43% no longer fulfilled the diagnostic criteria of OCD. The treatment also resulted in statistically significant improvements in self-rated OCD symptoms, general functioning and depression.</p> <p>Conclusions</p> <p>ICBT with therapist support reduces OCD symptoms, depressive symptoms and improves general functioning. Randomized trials are needed to confirm the effectiveness of this new treatment format.</p> <p>Trial Registration</p> <p>ClinicalTrials.gov: <a href="http://www.clinicaltrials.gov/ct2/show/NCT01348529">NCT01348529</a></p

Guidelines for diagnosis and management of the cobalamin-related remethylation disorders cblC, cblD, cblE, cblF, cblG, cblJ and MTHFR deficiency

BACKGROUND: Remethylation defects are rare inherited disorders in which impaired remethylation of homocysteine to methionine leads to accumulation of homocysteine and perturbation of numerous methylation reactions. OBJECTIVE: To summarise clinical and biochemical characteristics of these severe disorders and to provide guidelines on diagnosis and management. DATA SOURCES: Review, evaluation and discussion of the medical literature (Medline, Cochrane databases) by a panel of experts on these rare diseases following the GRADE approach. KEY RECOMMENDATIONS: We strongly recommend measuring plasma total homocysteine in any patient presenting with the combination of neurological and/or visual and/or haematological symptoms, subacute spinal cord degeneration, atypical haemolytic uraemic syndrome or unexplained vascular thrombosis. We strongly recommend to initiate treatment with parenteral hydroxocobalamin without delay in any suspected remethylation disorder; it significantly improves survival and incidence of severe complications. We strongly recommend betaine treatment in individuals with MTHFR deficiency; it improves the outcome and prevents disease when given early

A Novel Method for On-Line Characterization of Alkali Release and Thermal Stability of Materials Used in Thermochemical Conversion Processes

Alkali metal compounds are released during the thermal conversion of biofuels and fossil fuels and have a major impact on the efficiency of conversion processes. Herein, we describe a novel method for the simultaneous characterization of alkali release and mass loss from materials used in combustion and gasification processes including solid fuels, fluidized bed materials, and catalysts for gas reforming. The method combines the thermogravimetric analysis of selected samples with the on-line measurement of alkali release using a surface ionization detector. The technique builds on the careful treatment of alkali processes during transport from a sample to the downstream alkali monitor including the losses of alkali in the molecular form to hot walls, the formation of nanometer-sized alkali-containing particles during the cooling of exhaust gases, aerosol particle growth, and diffusion losses in sampling tubes. The performance of the setup was demonstrated using biomass samples and fluidized bed material from an industrial process. The emissions of alkali compounds during sample heating and isothermal conditions were determined and related to the simultaneous thermogravimetric analysis. The methodology was concluded to provide new evidence regarding the behavior of alkali in key processes including biomass pyrolysis and gasification and ash interactions with fluidized beds. The implications and further improvements of the technique are discussed

Online Speciation of Alkali Compounds by Temperature-Modulated Surface Ionization: Method Development and Application to Thermal Conversion

A novel method for online speciation of potassium- and sodium-containing compounds has been described and demonstrated. The method is based on a temperature-modulated surface ionization (TMSI) technique and may be used to determine the concentrations of alkali chlorides, hydroxides, carbonates, and sulfates in high-temperature processes. The measurement device is a further development of a surface ionization detector (SID) commonly used for online alkali measurements in combustion, gasification, and pyrolysis research. Discrimination between sodium and potassium compounds is made possible by differences in their aerosol evaporation characteristics as a function of temperature combined with the desorption kinetics of alkali on a hot platinum filament. The method is evaluated in laboratory experiments with known alkali salt concentrations. An experimental procedure where the platinum filament in the SID is regularly shifted between three temperatures is concluded to provide sufficient selectivity and time resolution for common applications. The TMSI method is successfully applied to characterize the emission of alkali compounds during pyrolysis of pine wood. The emissions during low-temperature pyrolysis are dominated by KOH, while similar amounts of KOH and NaOH are subsequently emitted from the remaining char and ash. The ability of real-time characterization of individual sodium and potassium compounds opens up new means to understand and optimize solid fuel conversion of common fuels such as low-grade biomass, waste, and coal

http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-69770 The Effect of Additive on Performance and Shelf-Stability of HSX-1/PCBM Photovoltaic Devices

shelf-stability of HSX-1/PCBM photovoltai

Formation of N719 Dye Multilayers on Dye Sensitized Solar Cell Photoelectrode Surfaces Investigated by Direct Determination of Element Concentration Depth Profiles

The structure of the dye layer adsorbed on the titania substrate in a dye-sensitized solar cell is of fundamental importance for the function of the cell, since it strongly influences the injection of photoelectrons from the excited dye molecules into the titania substrate. The adsorption isotherms of the N719 ruthenium-based dye were determined both with a direct method using the depth profiling technique neutral impact collision ion scattering spectroscopy (NICISS) and with the standard indirect solution depletion method. It is found that the dye layer adsorbed on the titania surface is laterally inhomogeneous in thickness and there is a growth mechanism already from low coverage levels involving a combination of monolayers and multilayers. It is also found that the amount of N719 adsorbed on the substrate depends on the titania structure. The present results show that dye molecules in dye-sensitized solar cells are not necessarily, as presumed, adsorbed as a self-assembled monolayer on the substrate

An endogenous peptide isolated from the gut, NK-lysin, stimulates insulin secretion without changes in cytosolic free Ca 2+ concentration

We have recently isolated and cloned a novel endogenous peptide from pig intestine, NK-lysin (NKL). In the present study we show that NKL (1–100 nM) potently and reversibly stimulates insulin secretion in rat pancreatic islets and in the β-cell line HIT T15. This effect of NKL was not accompanied by changes in cytoplasmic free calcium concentration. The stimulatory activity of NKL on insulin release was also observed in permeabilized islets under Ca 2+-clamped conditions. Preincubation of HIT T15 cells with NKL for 1 h or 24 h did not influence cell viability. Possible mechanisms of insulinotropic activity of NKL are discussed