DNA microarrays on nanoscale-controlled surface

We have developed new surface to ensure a proper spacing between immobilized biomolecules. While DNA microarray on this surface provided each probe DNA with ample space for hybridization with incoming target DNAs, the microarray showed enhanced discrimination efficiency for various types of single nucleotide polymorphism. The high discrimination efficiency holds for all tested cases (100:<1 for internal mismatched cases; 100:<28 for terminal mismatched ones). In addition, by investigating influence of hybridization temperature and washing condition on the fluorescence intensity and the discrimination efficiency with and without controlled mesospacing, it was observed that the nanoscale-controlled surface showed good discrimination efficiency in a wide range of temperature (37–50°C), and hybridization behavior on the surface was in agreement with the solution one. Intriguingly, it was found that washing process after the hybridization was critical for the high discrimination efficiency. For the particular case, washing process was so efficient that only 30 s washing was sufficient to reach the optimal discrimination ratio

Challenges and opportunities of centrifugal microfluidics for extreme point-of-care testing

The advantages offered by centrifugal microfluidic systems have encouraged its rapid adaptation in the fields of in vitro diagnostics, clinical chemistry, immunoassays, and nucleic acid tests. Centrifugal microfluidic devices are currently used in both clinical and point-of-care settings. Recent studies have shown that this new diagnostic platform could be potentially used in extreme point-of-care settings like remote villages in the Indian subcontinent and in Africa. Several technological inventions have decentralized diagnostics in developing countries; however, very few microfluidic technologies have been successful in meeting the demand. By identifying the finest difference between the point-of-care testing and extreme point-of-care infrastructure, this review captures the evolving diagnostic needs of developing countries paired with infrastructural challenges with technological hurdles to healthcare delivery in extreme point-of-care settings. In particular, the requirements for making centrifugal diagnostic devices viable in developing countries are discussed based on a detailed analysis of the demands in different clinical settings including the distinctive needs of extreme point-of-care settings.ope

Liquid biopsy in lung cancer: Clinical applications of circulating biomarkers (CTCs and ctDNA)

Lung cancer is by far the leading cause of cancer death worldwide, with non-small cell lung cancer (NSCLC) accounting for the majority of cases. Recent advances in the understanding of the biology of tumors and in highly sensitive detection technologies for molecular analysis offer targeted therapies, such as epidermal growth factor receptor (EGFR) tyrosine kinase inhibitors. However, our understanding of an individual patient&apos;s lung cancer is often limited by tumor accessibility because of the high risk and invasive nature of current tissue biopsy procedures. Liquid biopsy, the analysis of circulating biomarkers from peripheral blood, such as circulating tumor cells (CTCs) and circulating tumor DNA (ctDNA), offers a new source of cancer-derived materials that may reflect the status of the disease better and thereby contribute to more personalized treatment. In this review, we examined the clinical significance and uniqueness of CTCs and ctDNA from NSCLC patients, isolation and detection methods developed to analyze each type of circulating biomarker, and examples of clinical studies of potential applications for early diagnosis, prognosis, treatment monitoring, and prediction of resistance to therapy. We also discuss challenges that remain to be addressed before such tools are implemented for routine use in clinical settings

Simple room temperature bonding of thermoplastics and poly(dimethylsiloxane)

We describe a simple and versatile method for bonding thermoplastics to elastomeric polydimethylsiloxane (PDMS) at room temperature. The bonding of various thermoplastics including polycarbonate (PC), cyclic olefin copolymer (COC), polymethylmethacrylate (PMMA), and polystyrene (PS), to PDMS has been demonstrated at room temperature. An irreversible bonding was formed instantaneously when the thermoplastics, activated by oxygen plasma followed by aminopropyltriethoxysilane modification, were brought into contact with the plasma treated PDMS. The surface modified thermoplastics were characterized by water contact angle measurements and Xray photoelectron spectroscopy. The tensile strength of the bonded hybrid devices fabricated with PC, COC, PMMA, and PS was found to be 430, 432, 385, and 388 kPa, respectively. The assembled devices showed high burst resistance at a maximum channel pressure achievable by an in-house built syringe pump, 528 kPa. Furthermore, they displayed very high hydrolytic stability; no significant change was observed even after the storage in water at 37 degrees C over a period of three weeks. In addition, this thermoplastic-to-PDMS bonding technique has been successfully employed to fabricate a relatively large sized device. For example, a lab-on-a-disc with a diameter of 12 cm showed no leakage when it spins for centrifugal fluidic pumping at a very high rotating speed of 6000 rpm.close443

PDMS microfluidics developed for polymer based photonic biosensors

In this work, advances in the fabrication technology and functional analysis of a polymer microfluidic system-as a significant part of a developed polymer photonic biosensor-are reported. Robust and cost-effective microfluidics in PDMS including sample preparation functions is designed and realized by using SU-8 moulding replica. Surface modification strategies using Triton X-100 and PDMS-PEO and their effect on device sealing and non-specific protein adsorption are investigated by contact angle measurement and in situ fluorescence microscopy. © 2014 Springer-Verlag Berlin Heidelberg

Emerging techniques in the isolation and characterization of extracellular vesicles and their roles in cancer diagnostics and prognostics

Extracellular vesicles (EVs) are cell-derived nanovesicles, present in almost all types of body fluids, which play an important role in intercellular communication and are involved in the transport of biological signals for regulating diverse cellular functions. Due to the increasing clinical interest in the role of EVs in tumor promotion, various techniques for their isolation, detection, and characterization are being developed. In this review, we present an overview of the current EV isolation and characterization methods in addition to their applications and limitations. Furthermore, EVs as the potential emerging biomarkers in cancer management and their clinical implementation are briefly discussed.clos

Aminosilane layers on the plasma activated thermoplastics: Influence of solvent on its structure and morphology

The chemistry and the structure of aminosilane layer on the plasma activated thermoplastic substrates, e.g., polycarbonate (PC), polystyrene (PS), poly(methyl methacrylate) (PMMA), and cyclic olefin co-polymer (COC) were investigated at the molecular level. The nature of the surface functional groups of the silane layers prepared by solution phase deposition in aqueous and anhydrous solvents were studied using various techniques including ellipsometry, goniometry, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and attenuated total reflectance infrared spectroscopy (ATR-IR). The XPS analyses revealed the presence of various oxygen functionalities on the plasma activated thermoplastics. Considerable differences were observed for the structure of aminosilane depending on the solvent used for the reaction. Deposition from aqueous solution resulted in relatively flat and smooth surfaces with consistent thickness compared to the anhydrous solution deposition. In the former case, 33% of the total nitrogen accounted for protonated amine and 16% for the free amino groups. In the latter, only 6% accounted for the protonated amine. The point of zero charge (pzc), on the aminosilane modified PC was found to be around 7, indicated that the surface is positively charged below pH 7 and negatively charged above pH 7. The surface analysis data suggested that various interactions are possible between the plasma activated thermoplastic surface and the aminosilane. In general, they are bound to the surface through covalent bond formation between the oxygen functionalities on the thermoplastic surface and the amino or the silanol groups of the aminosilane.close0