168 research outputs found
Sorption kinetic study of selenite and selenate onto a high and low pressure aged iron oxide nanomaterial
The sorption of selenite (SeO32−) and selenate (SeO42−) onto Fe3O4 nanomaterials produced by non microwave-assisted or microwave-assisted synthetic techniques was investigated through use of the batch technique. The phase of both synthetic nanomaterials was determined to be magnetite by X-ray diffraction. The average grain sizes of non microwave-assisted and microwave-assisted synthetic Fe3O4 were determined to be 27 and 25 nm, respectively through use of the Scherrer\u27s equation. Sorption of selenite was pH independent in the pH range of 2-6, while sorption of selenate decreased at pH 5 and 6. The addition of Cl− had no significant effect on selenite or selenate binding, while the addition of NO3− only affected selenate binding to the microwave assisted Fe3O4. A decrease of selenate binding to both synthetic particles was observed after the addition of SO42− while selenite binding was not affected. The addition of PO43− beginning at concentrations of 0.1 ppm had the most prominent effect on the binding of both selenite and selenate. The capacities of binding, determined through the use of Langmuir isotherm, were found to be 1923 and 1428 mg Se/kg of non microwave-assisted Fe3O4 and 2380 and 2369 mg Se/kg of microwave-assisted Fe3O4 for selenite and selenate, respectively
Gold Binding by Native and Chemically Modified Hops Biomasses
Heavy metals from mining, smelting operations and other industrial processing facilities pollute
wastewaters worldwide. Extraction of metals from industrial effluents has been widely studied due to the
economic advantages and the relative ease of technical implementation. Consequently, the search for new
and improved methodologies for the recovery of gold has increased. In this particular research, the use of
cone hops biomass (Humulus lupulus) was investigated as a new option for gold recovery. The results
showed that the gold binding to native hops biomass was pH dependent from pH 2 to pH 6, with a maximum
percentage binding at pH 3. Time dependency studies demonstrated that Au(III) binding to native and
modified cone hops biomasses was found to be time independent at pH 2 while at pH 5, it was time
dependent. Capacity experiments demonstrated that at pH 2, esterified hops biomass bound 33.4 mg Au/g of
biomass, while native and hydrolyzed hops biomasses bound 28.2 and 12.0 mg Au/g of biomass,
respectively. However, at pH 5 the binding capacities were 38.9, 37.8 and 11.4 mg of Au per gram of native,
esterified and hydrolyzed hops biomasses, respectively
Performance of an Influenza Rapid Test in Children in a Primary Healthcare Setting in Nicaragua
Background: Influenza is major public health threat worldwide, yet the diagnostic accuracy of rapid tests in developing country settings is not well described. Methodology/Principal Findings: To investigate the diagnostic accuracy of the QuickVue Influenza A+B test in a primary care setting in a developing country, we performed a prospective study of diagnostic accuracy of the QuickVue Influenza A+B test in comparison to reverse transcriptase-polymerase chain reaction (RT-PCR) in a primary healthcare setting in children aged 2 to 12 years in Managua, Nicaragua. The sensitivity and specificity of the QuickVue test compared to RT-PCR were 68.5 % (95 % CI 63.4, 73.3) and 98.1 % (95 % CI 96.9, 98.9), respectively, for children with a fever or history of a fever and cough and/or sore throat. Test performance was found to be lower on the first day that symptoms developed in comparison to test performance on days two or three of illness. Conclusions/Significance: Our study found that the QuickVue Influenza A+B test performed as well in a developing countr
Systematic Computational and Experimental Investigation of Lithium-Ion Transport Mechanisms in Polyester-Based Polymer Electrolytes
Understanding the mechanisms of lithium-ion transport in polymers is crucial for the design of polymer electrolytes. We combine modular synthesis, electrochemical characterization, and molecular simulation to investigate lithium-ion transport in a new family of polyester-based polymers and in poly(ethylene oxide) (PEO). Theoretical predictions of glass-transition temperatures and ionic conductivities in the polymers agree well with experimental measurements. Interestingly, both the experiments and simulations indicate that the ionic conductivity of PEO, relative to the polyesters, is far higher than would be expected from its relative glass-transition temperature. The simulations reveal that diffusion of the lithium cations in the polyesters proceeds via a different mechanism than in PEO, and analysis of the distribution of available cation solvation sites in the various polymers provides a novel and intuitive way to explain the experimentally observed ionic conductivities. This work provides a platform for the evaluation and prediction of ionic conductivities in polymer electrolyte materials
Ion Diffusion Coefficients Model and Molar Conductivities of Ionic Salts in Aprotic Solvents
Increased Mobility of Metal Oxide Nanoparticles Due to Photo and Thermal Induced Disagglomeration
Significant advances have been made on our understanding of the fate and transport of engineered nanomaterials. One unexplored aspect of nanoparticle aggregation is how environmental stimuli such as light exposure and temperature variations affect the mobility of engineered nanoparticles. In this study, TiO2, ZnO, and CeO2 were chosen as model materials for investigating the mobility of nanoparticles under three external stimuli: heat, light and sonication. Sunlight and high power sonication were able to partially disagglomerate metal oxide clusters, but primary particles bonded by solid state necks were left intact. A cycle of temperature increase from 25°C to 65°C and then decrease back was found to disagglomerate the compact clusters in the heating phase and reagglomerate them as more open fractal structures during the cooling phase. A fractal model summing the pair-wise DLVO interactions between primary particles within two fractal agglomerates predicts weak attractions on the order of a few kT. Our study shows that common environmental stimuli such as light exposure or temperature variation can disagglomerate nanoparticle clusters and enhance their mobility in open waters. This phenomenon warrants attention since it is likely that metal oxide nanoparticles will experience these natural stimuli during their transport in the environment
Dietary cadmium and risk of invasive postmenopausal breast cancer in the VITAL cohort.
This study does not support the hypothesis that dietary cadmium intake is a risk factor for breast cancer. However, non-differential measurement error in the estimate of cadmium intake is likely the most important factor that could have obscured an association
Dual action of chromium-reducing and nitrogen-fixing Bacillus megaterium-ASNF3 for improved agro-rehabilitation of chromium-stressed soils
Nanoscale Metallic Iron for Environmental Remediation: Prospects and Limitations
The amendment of the subsurface with nanoscale metallic iron particles
(nano-Fe0) has been discussed in the literature as an efficient in situ
technology for groundwater remediation. However, the introduction of this
technology was controversial and its efficiency has never been univocally
established. This unsatisfying situation has motivated this communication whose
objective was a comprehensive discussion of the intrinsic reactivity of
nano-Fe0 based on the contemporary knowledge on the mechanism of contaminant
removal by Fe0 and a mathematical model. It is showed that due to limitations
of the mass transfer of nano-Fe0 to contaminants, available concepts cannot
explain the success of nano-Fe0 injection for in situ groundwater remediation.
It is recommended to test the possibility of introducing nano-Fe0 to initiate
the formation of roll-fronts which propagation would induce the reductive
transformation of both dissolved and adsorbed contaminants. Within a
roll-front, FeII from nano-Fe0 is the reducing agent for contaminants. FeII is
recycled by biotic or abiotic FeIII reduction. While the roll-front concept
could explain the success of already implemented reaction zones, more research
is needed for a science-based recommendation of nano- Fe0 for subsurface
treatment by roll-front
Bioaccumulation and ecotoxicity of carbon nanotubes
Carbon nanotubes (CNT) have numerous industrial applications and may be released to the environment. In the aquatic environment, pristine or functionalized CNT have different dispersion behavior, potentially leading to different risks of exposure along the water column. Data included in this review indicate that CNT do not cross biological barriers readily. When internalized, only a minimal fraction of CNT translocate into organism body compartments. The reported CNT toxicity depends on exposure conditions, model organism, CNT-type, dispersion state and concentration. In the ecotoxicological tests, the aquatic organisms were generally found to be more sensitive than terrestrial organisms. Invertebrates were more sensitive than vertebrates. Single-walled CNT were found to be more toxic than double-/multi-walled CNT. Generally, the effect concentrations documented in literature were above current modeled average environmental concentrations. Measurement data are needed for estimation of environmental no-effect concentrations. Future studies with benchmark materials are needed to generate comparable results. Studies have to include better characterization of the starting materials, of the dispersions and of the biological fate, to obtain better knowledge of the exposure/effect relationships
- …