Internal structure of nanoparticles of Al generated by laser ablation in liquid ethanol

Al NPs are synthesized by laser ablation of a bulk Al target immersed into liquid ethanol saturated with hydrogen at atmospheric pressure. The nanoparticles possess a well-distinguished core-shell structure. High Resolution Transmission Electron Microscopy shows several layers inside the Al nanoparticle: oxide layer, amorphous Al, single crystal Al, and a cavity in the center. Formation of the cavity is attributed to the sharp increase of hydrogen dissolution in Al upon its melting and its eventual release after the solidification

Impact behavior of injected PP/nanoclay parts

This work attempts to contribute to bridge the gap between scientific challenges and industrial stakes regarding PP/nanoclay composites. Pieces of nanocomposites were obtained by direct injection of commercial PP mixed with a commercial MB of PP with 50% of organoclay, with a double-gated hot runner mould, which produced mouldings with a weld line. The moulding microstructure was assessed by POM and XRD, while the distribution and exfoliation grade of clay was evaluated by TEM and XRD. The typical skin-core structure was found, with a skin thickness wider in bulk than in weld line zones. Regarding clay platelets mostly intercalated structures were seen. The impact properties at room temperature were assessed by means of tensile and biaxial tests. Properties were monitored at different sites of the mouldings. At the weld line zone less energy was consumed under tensile conditions and exhibited higher apparent impact toughness under biaxial conditions than the bulk zone. Visual inspection of biaxially impacted samples showed that the orientation of polymer molecules and clay platelets induced by melt flow prevailed, and the weld line was not the determinant of the toughness of the mouldings. An optimum in impact performance was found for moulding with 3% of clay, since at larger clay contents platelets agglomerated and acted as stress raisers

Reaching within a dynamic virtual environment

This is an Open Access article distributed under the terms of the Creative Commons Attribution Licens

A kinematic analysis of a haptic handheld stylus in a virtual environment: a study in healthy subjects

<p>Abstract</p> <p>Background</p> <p>Virtual Reality provides new options for conducting motor assessment and training within computer-generated 3 dimensional environments. To date very little has been reported about normal performance in virtual environments. The objective of this study was to evaluate the test-retest reliability of a clinical procedure measuring trajectories with a haptic handheld stylus in a virtual environment and to establish normative data in healthy subjects using this haptic device.</p> <p>Methods</p> <p>Fifty-eight normal subjects; aged from 20 to 69, performed 3 dimensional hand movements in a virtual environment using a haptic device on three occasions within one week. Test-retest stability and standardized normative data were obtained for all subjects.</p> <p>Results</p> <p>No difference was found between test and retest. The limits of agreement revealed that changes in an individual's performance could not be detected. There was a training effect between the first test occasion and the third test occasion. Normative data are presented.</p> <p>Conclusion</p> <p>A new test was developed for recording the kinematics of the handheld haptic stylus in a virtual environment. The normative data will be used for purposes of comparison in future assessments, such as before and after training of persons with neurological deficits.</p

Toward Rare-Earth-Free Permanent Magnets: A Combinatorial Approach Exploiting the Possibilities of Modeling, Shape Anisotropy in Elongated Nanoparticles, and Combinatorial Thin-Film Approach

The objective of the rare-earth free permanent magnets (REFREEPM) project is to develop a new generation of high-performance permanent magnets (PMs) without rare earths. Our approach is based on modeling using a combinatorial approach together with micromagnetic modeling and the realization of the modeled systems (I) by using a novel production of high-aspect-ratio (>5) nanostructrures (nanowires, nanorods, and nanoflakes) by exploiting the magnetic shape anisotropy of the constituents that can be produced via chemical nanosynthesis polyol process or electrodeposition, which can be consolidated with novel processes for a new generation of rare-earth free PMs with energy product in the range of 60 kJ/m3 < (BH)max < 160 kJ/m3 at room temperature, and (II) by using a high-throughput thin-film synthesis and high-throughput characterization approach to identify promising candidate materials that can be stabilized in a tetragonal or hexagonal structure by epitaxial growth on selected substrates, under various conditions of pressure, stoichiometry, and temperature. In this article, we report the progress so far in selected phases.This work is supported by European Commission (REFREEPERMAG project) grant number GA-NMP3-SL-2012-280670

Evaluation of a modern-analogue methodology for reconstructing Australian palaeoclimate from pollen

Quantitative palaeoclimate reconstructions are widely used to evaluate climatemodel performance. Here, as part of an effort to provide such a data set for Australia, we examine the impact of analytical decisions and sampling assumptions on modern-analogue reconstructions using a continent-wide pollen data set. There is a high degree of correlation between temperature variables in the modern climate of Australia, but there is sufficient orthogonality in the variations of precipitation, summer and winter temperature and plant–available moisture to allow independent reconstructions of these four variables to be made. The method of analogue selection does not affect the reconstructions, although bootstrap resampling provides a more reliable technique for obtaining robust measures of uncertainty. The number of analogues used affects the quality of the reconstructions: the most robust reconstructions are obtained using 5 analogues. The quality of reconstructions based on post-1850 CE pollen samples differ little from those using samples from between 1450 and 1849 CE, showing that European post settlement modification of vegetation has no impact on the fidelity of the reconstructions although it substantially increases the availability of potential analogues. Reconstructions based on core top samples are more realistic than those using surface samples, but only using core top samples would substantially reduce the number of available analogues and therefore increases the uncertainty of the reconstructions. Spatial and/or temporal averaging of pollen assemblages prior to analysis negatively affects the subsequent reconstructions for some variables and increases the associated uncertainties. In addition, the quality of the reconstructions is affected by the degree of spatial smoothing of the original climate data, with the best reconstructions obtained using climate data froma 0.5° resolution grid, which corresponds to the typical size of the pollen catchment. This study provides a methodology that can be used to provide reliable palaeoclimate reconstructions for Australia, which will fill in a major gap in the data sets used to evaluate climate models

The effect of starting point placement technique on thoracic transverse process strength: an ex vivo biomechanical study

<p>Abstract</p> <p>Background</p> <p>The use of thoracic pedicle screws in spinal deformity, trauma, and tumor reconstruction is becoming more common. Unsuccessful screw placement may require salvage techniques utilizing transverse process hooks. The effect of different starting point placement techniques on the strength of the transverse process has not previously been reported. The purpose of this paper is to determine the biomechanical properties of the thoracic transverse process following various pedicle screw starting point placement techniques.</p> <p>Methods</p> <p>Forty-seven fresh-frozen human cadaveric thoracic vertebrae from T2 to T9 were disarticulated and matched by bone mineral density (BMD) and transverse process (TP) cross-sectional area. Specimens were randomized to one of four groups: A, control, and three others based on thoracic pedicle screw placement technique; B, straightforward; C, funnel; and D, in-out-in. Initial cortical bone removal for pedicle screw placement was made using a burr at the location on the transverse process or transverse process-laminar junction as published in the original description of each technique. The transverse process was tested measuring load-to-failure simulating a hook in compression mode. Analysis of covariance and Pearson correlation coefficients were used to examine the data.</p> <p>Results</p> <p>Technique was a significant predictor of load-to-failure (<it>P </it>= 0.0007). The least squares mean (LS mean) load-to-failure of group A (control) was 377 N, group B (straightforward) 355 N, group C (funnel) 229 N, and group D (in-out-in) 301 N. Significant differences were noted between groups A and C, A and D, B and C, and C and D. BMD (0.925 g/cm²[range, 0.624-1.301 g/cm²]) was also a significant predictor of load-to-failure, for all specimens grouped together (<it>P </it>< 0.0001) and for each technique (<it>P <</it>0.05). Level and side tested were not found to significantly correlate with load-to-failure.</p> <p>Conclusions</p> <p>The residual coronal plane compressive strength of the thoracic transverse process is dependent upon the screw starting point placement technique. The funnel technique significantly weakens transverse processes as compared to the straightforward technique, which does not significantly weaken the transverse process. It is also dependent upon bone mineral density, and low failure loads even in some control specimens suggest limited usefulness of the transverse process for axial compression loading in the osteoporotic thoracic spine.</p

Desempenho preliminar de novos genótipos de aveia e trigo na Depressão Ccentral do RS

More than two hundred oat and wheat advanced-lines selected in 1983 were grown in field experiments at Guaíba, RS, Brazil, in 1984. The objective was to quantify, grain yield, 100 grain weight, hectoliter weight, biological yield, heading time, and plant stature. The results were significant for all traits, indicating that selection was efficient in oats; on the other hand, only one wheat-line showed superiority to the best check-variety.Mais de 200 linhagens avançadas de aveia (Avena sativa L.) e trigo (Triticum aestivum L.), selecionadas em 1983, foram avaliadas em dois experimentos, conduzidos em Guaíba, RS, durante o ano de 1984. O objetivo foi testar rendimento de grãos, peso do hectolitro e de 100 grãos, rendimento biológico, ciclo de desenvolvimento e estatura de planta. Os resultados foram significativos para todas as variáveis, indicando que a seleção tem sido eficiente na aveia; por outro lado, em trigo, somente uma linhagem mostrou superioridade em rendimento de grãos sobre a melhor cultivar-padrão

Evolution of Linear Absorption and Nonlinear Optical Properties in V-Shaped Ruthenium(II)-Based Chromophores

In this article, we describe a series of complexes with electron-rich cis-{Ru^(II)(NH_3)_4}^(2+) centers coordinated to two pyridyl ligands bearing N-methyl/arylpyridinium electron-acceptor groups. These V-shaped dipolar species are new, extended members of a class of chromophores first reported by us (Coe, B. J. et al. J. Am. Chem. Soc. 2005, 127, 4845−4859). They have been isolated as their PF_6− salts and characterized by using various techniques including ^1H NMR and electronic absorption spectroscopies and cyclic voltammetry. Reversible Ru^(III/II) waves show that the new complexes are potentially redox-switchable chromophores. Single crystal X-ray structures have been obtained for four complex salts; three of these crystallize noncentrosymmetrically, but with the individual molecular dipoles aligned largely antiparallel. Very large molecular first hyperpolarizabilities β have been determined by using hyper-Rayleigh scattering (HRS) with an 800 nm laser and also via Stark (electroabsorption) spectroscopic studies on the intense, visible d → π^* metal-to-ligand charge-transfer (MLCT) and π → π^* intraligand charge-transfer (ILCT) bands. The latter measurements afford total nonresonant β_0 responses as high as ca. 600 × 10^(−30) esu. These pseudo-C_(2v) chromophores show two substantial components of the β tensor, β_(zzz) and β_(zyy), although the relative significance of these varies with the physical method applied. According to HRS, β_(zzz) dominates in all cases, whereas the Stark analyses indicate that β_(zyy) is dominant in the shorter chromophores, but β_(zzz) and β_(zyy) are similar for the extended species. In contrast, finite field calculations predict that β_(zyy) is always the major component. Time-dependent density functional theory calculations predict increasing ILCT character for the nominally MLCT transitions and accompanying blue-shifts of the visible absorptions, as the ligand π-systems are extended. Such unusual behavior has also been observed with related 1D complexes (Coe, B. J. et al. J. Am. Chem. Soc. 2004, 126, 3880−3891)