A stochastic design rainfall generator based on copulas and mass curves

The use of design storms can be very useful in many hydrological and hydraulic practices. In this study, the concept of a copula-based secondary return period in combination with the concept of mass curves is used to generate point-scale design storms. The analysis is based on storms selected from the 105 year rainfall time series with a 10 min resolution, measured at Uccle, Belgium. In first instance, bivariate copulas and secondary return periods are explained, together with a focus on which couple of storm variables is of highest interest for the analysis and a discussion of how the results might be affected by the goodness-of-fit of the copula. Subsequently, the fitted copula is used to sample storms with a predefined secondary return period for which characteristic variables such as storm duration and total storm depth can be derived. In order to construct design storms with a realistic storm structure, mass curves of 1st, 2nd, 3rd and 4th quartile storms are developed. An analysis shows that the assumption of independence between the secondary return period and the internal storm structure could be made. Based on the mass curves, a technique is developed to randomly generate an intrastorm structure. The coupling of both techniques eventually results in a methodology for stochastic design storm generation. Finally, its practical usefulness for design studies is illustrated based on the generation of a set of statistically identical design storm and rainfall-runoff modelling

Hydrological controls on nutrient exportation from old-growth evergreen rainforests and Eucalyptus nitens plantation in headwater catchments at Southern Chile

Soil cover disturbances have a direct effect on biogeochemistry, potentially enhancing nutrient loss, land degradation and associated changes in ecosystem services and livelihood support. The objective of this study was to assess how canopy affected throughfall chemistry and how hydrology affected stream nutrient load responses in two watersheds dominated by native old-growth evergreen rainforest (NF) and exotic plantation of Eucalyptus nitens (EP), located at the Coastal mountain range of southern Chile (40˚S). We measured nitrogen (NO3-N, NH4-N, Organic-N, Total-N) and total phosphorus (Total-P) at catchment discharge, and δ18O in throughfall precipitation and stream discharge in both catchments, in order to separate throughfall (or new water) contributions during storm events. It was hypothesized that all nutrients showed an increase in concentration as discharge increased (or enhanced hydrological access), in EP; but not in NF. Our results indicated that Organic-N, Total-N and Total-P concentrations were positively related to discharge. However, 3 NO− -N showed a negative correlation with catchment discharge

GLEAM v3 : satellite-based land evaporation and root-zone soil moisture

The Global Land Evaporation Amsterdam Model (GLEAM) is a set of algorithms dedicated to the estimation of terrestrial evaporation and root-zone soil moisture from satellite data. Ever since its development in 2011, the model has been regularly revised, aiming at the optimal incorporation of new satellite-observed geophysical variables, and improving the representation of physical processes. In this study, the next version of this model (v3) is presented. Key changes relative to the previous version include (1) a revised formulation of the evaporative stress, (2) an optimized drainage algorithm, and (3) a new soil moisture data assimilation system. GLEAM v3 is used to produce three new data sets of terrestrial evaporation and root-zone soil moisture, including a 36-year data set spanning 1980-2015, referred to as v3a (based on satellite-observed soil moisture, vegetation optical depth and snow-water equivalent, reanalysis air temperature and radiation, and a multi-source precipitation product), and two satellite-based data sets. The latter share most of their forcing, except for the vegetation optical depth and soil moisture, which are based on observations from different passive and active C-and L-band microwave sensors (European Space Agency Climate Change Initiative, ESA CCI) for the v3b data set (spanning 2003-2015) and observations from the Soil Moisture and Ocean Salinity (SMOS) satellite in the v3c data set (spanning 2011-2015). Here, these three data sets are described in detail, compared against analogous data sets generated using the previous version of GLEAM (v2), and validated against measurements from 91 eddy-covariance towers and 2325 soil moisture sensors across a broad range of ecosystems. Results indicate that the quality of the v3 soil moisture is consistently better than the one from v2: average correlations against in situ surface soil moisture measurements increase from 0.61 to 0.64 in the case of the v3a data set and the representation of soil moisture in the second layer improves as well, with correlations increasing from 0.47 to 0.53. Similar improvements are observed for the v3b and c data sets. Despite regional differences, the quality of the evaporation fluxes remains overall similar to the one obtained using the previous version of GLEAM, with average correlations against eddy-covariance measurements ranging between 0.78 and 0.81 for the different data sets. These global data sets of terrestrial evaporation and root-zone soil moisture are now openly available at www.GLEAM.eu and may be used for large-scale hydrological applications, climate studies, or research on land-atmosphere feedbacks

Remote sensing and wetland ecology: a South African case study

Remote sensing offers a cost efficient means for identifying and monitoring wetlands over a large area and at different moments in time. In this study, we aim at providing ecologically relevant information on characteristics of temporary and permanent isolated open water wetlands, obtained by standard techniques and relatively cheap imagery. The number, surface area, nearest distance, and dynamics of isolated temporary and permanent wetlands were determined for the Western Cape, South Africa. Open water bodies (wetlands) were mapped from seven Landsat images (acquired during 1987 – 2002) using supervised maximum likelihood classification. This study has indicated that ecologically relevant data can be generated for the larger wetlands through relatively cheap imagery and standard techniques, despite the relatively low resolution of Landsat and Envisat imagery. For the characterisation of very small wetlands, high spatial resolution optical or radar images are needed. This study exemplifies the benefits of integrating remote sensing and ecology and hence stimulates interdisciplinary research of isolated wetlands

Influence of surface roughness measurement scale on radar backscattering in different agricultural soils

Soil surface roughness strongly affects the scattering of microwaves on the soil surface and determines the backscattering coefficient (σ 0 ) observed by radar sensors. Previous studies have shown important scale issues that compromise the measurement and parameterization of roughness especially in agricultural soils. The objective of this paper was to determine the roughness scales involved in the backscattering process over agricultural soils. With this aim, a database of 132 5-m profiles taken on agricultural soils with different tillage conditions was used. These measurements were acquired coinciding with a series of ENVISAT/ASAR observations. Roughness profiles were processed considering three different scaling issues: 1) influence of measurement range; 2) influence of low-frequency roughness components; and 3) influence of high-frequency roughness components. For each of these issues, eight different roughness parameters were computed and the following aspects were evaluated: 1) roughness parameters values; 2) correlation with σ 0 ; and 3) goodness-of-fit of the Oh model. Most parameters had a significant correlation with σ 0 especially the fractal dimension, the peak frequency, and the initial slope of the autocorrelation function. These parameters had higher correlations than classical parameters such as the standard deviation of surface heights or the correlation length. Very small differences were observed when longer than 1-m profiles were used as well as when small-scale roughness components (100 cm) were disregarded. In conclusion, the medium-frequency roughness components (scale of 5-100 cm) seem to be the most influential scales in the radar backscattering process on agricultural soils.This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Grant BES-2012-054521, Project CGL2011-24336, Project CGL2015-64284-C2-1-R, and Project CGL2016-75217-R (MINECO/FEDER, EU)

Error in radar-derived soil moisture due to roughness parameterization: an analysis based on synthetical surface profiles

In the past decades, many studies on soil moisture retrieval from SAR demonstrated a poor correlation between the top layer soil moisture content and observed backscatter coefficients, which mainly has been attributed to difficulties involved in the parameterization of surface roughness. The present paper describes a theoretical study, performed on synthetical surface profiles, which investigates how errors on roughness parameters are introduced by standard measurement techniques, and how they will propagate through the commonly used Integral Equation Model (IEM) into a corresponding soil moisture retrieval error for some of the currently most used SAR configurations. Key aspects influencing the error on the roughness parameterization and consequently on soil moisture retrieval are: the length of the surface profile, the number of profile measurements, the horizontal and vertical accuracy of profile measurements and the removal of trends along profiles. Moreover, it is found that soil moisture retrieval with C-band configuration generally is less sensitive to inaccuracies in roughness parameterization than retrieval with L-band configuration.The research presented in this paper is funded by the Belgian Science Policy Office in the frame of the Stereo II programme - project SR/00/100

Effective roughness modelling as a tool for soil moisture retrieval from C-and L-band SAR

Soil moisture retrieval from Synthetic Aperture Radar (SAR) using state-of-the-art backscatter models is not fully operational at present, mainly due to difficulties involved in the parameterisation of soil surface roughness. Recently, increasing interest has been drawn to the use of calibrated or effective roughness parameters, as they circumvent issues known to the parameterisation of field-measured roughness. This paper analyses effective roughness parameters derived from C- and L-band SAR observations over a large number of agricultural seedbed sites in Europe. It shows that parameters may largely differ between SAR acquisitions, as they are related to the observed backscatter coefficients and variations in the local incidence angle. Therefore, a statistical model is developed that allows for estimating effective roughness parameters from microwave backscatter observations. Subsequently, these parameters can be propagated through the Integral Equation Model (IEM) for soil moisture retrieval. It is shown that fairly accurate soil moisture results are obtained both at C-and L-band, with an RMSE ranging between 4 vol% and 6.5 vol%.The research presented in this paper is funded by the Belgian Science Policy Office and the National Research Fund of Luxembourg in the frame of the Stereo II programme –project SR/00/100, and by the Spanish Government’s National Research, Development and Innovation Plan, project CGL2007- 63453/HID

Identification of temporal consistency in rating curve data : Bidirectional Reach (BReach)

In this paper, a methodology is developed to identify consistency of rating curve data based on a quality analysis of model results. This methodology, called Bidirectional Reach (BReach), evaluates results of a rating curve model with randomly sampled parameter sets in each observation. The combination of a parameter set and an observation is classified as nonacceptable if the deviation between the accompanying model result and the measurement exceeds observational uncertainty. Based on this classification, conditions for satisfactory behavior of a model in a sequence of observations are defined. Subsequently, a parameter set is evaluated in a data point by assessing the span for which it behaves satisfactory in the direction of the previous (or following) chronologically sorted observations. This is repeated for all sampled parameter sets and results are aggregated by indicating the endpoint of the largest span, called the maximum left (right) reach. This temporal reach should not be confused with a spatial reach (indicating a part of a river). The same procedure is followed for each data point and for different definitions of satisfactory behavior. Results of this analysis enable the detection of changes in data consistency. The methodology is validated with observed data and various synthetic stage-discharge data sets and proves to be a robust technique to investigate temporal consistency of rating curve data. It provides satisfying results despite of low data availability, errors in the estimated observational uncertainty, and a rating curve model that is known to cover only a limited part of the observations

Перспективи інформаційної економіки

Метою доповіді є дослідження впливу інформаційних технологій на розвиток таких категорій сучасності як перехід сучасної економіки до інформаційного етапу, а також становлення інформаційного суспільства на основі сучасного пост промислового суспільства споживання