Intrusion Detection Systems for Community Wireless Mesh Networks

Wireless mesh networks are being increasingly used to provide affordable network connectivity to communities where wired deployment strategies are either not possible or are prohibitively expensive. Unfortunately, computer networks (including mesh networks) are frequently being exploited by increasingly profit-driven and insidious attackers, which can affect their utility for legitimate use. In response to this, a number of countermeasures have been developed, including intrusion detection systems that aim to detect anomalous behaviour caused by attacks. We present a set of socio-technical challenges associated with developing an intrusion detection system for a community wireless mesh network. The attack space on a mesh network is particularly large; we motivate the need for and describe the challenges of adopting an asset-driven approach to managing this space. Finally, we present an initial design of a modular architecture for intrusion detection, highlighting how it addresses the identified challenges

Pressure screening in the interior of primary shells in double-wall carbon nanotubes

The pressure response of double-wall carbon nanotubes has been investigated by means of Raman spectroscopy up to 10 GPa. The intensity of the radial breathing modes of the outer tubes decreases rapidly but remain observable up to 9 GPa, exhibiting a behavior similar (but less pronounced) to that of single-wall carbon nanotubes, which undergo a shape distortion at higher pressures. In addition, the tangential band of the external tubes broadens and decreases in amplitude. The corresponding Raman features of the internal tubes appear to be considerably less sensitive to pressure. All findings lead to the conclusion that the outer tubes act as a protection shield for the inner tubes whereas the latter increase the structural stability of the outer tubes upon pressure application.Comment: PDF with 15 pages, 3 figures, 1 table; submitted to Physical Review

The Computational Complexity of the Lorentz Lattice Gas

The Lorentz lattice gas is studied from the perspective of computational complexity theory. It is shown that using massive parallelism, particle trajectories can be simulated in a time that scales logarithmically in the length of the trajectory. This result characterizes the ``logical depth" of the Lorentz lattice gas and allows us to compare it to other models in statistical physics.Comment: 9 pages, LaTeX, to appear in J. Stat. Phy

Modelled distributions and conservation priorities of wild sorghums (Sorghum Moench)

Aim: To fill knowledge gaps regarding the distributions, ecogeographic niches and conservation status of sorghum's wild relatives (Sorghum Moench). Location: The study covered the potential native ranges of wild Sorghum taxa worldwide, including Australia, New Guinea, Asia, Africa and Central America. Methods: We modelled the distributions of 23 wild Sorghum taxa, characterized their ecogeographic niches, assessed their conservation status both ex situ and in situ and performed preliminary threat assessments. Results: Three taxa were categorized as “high priority” for further conservation based on their ex situ and in situ assessments, with a further 19 as “medium priority” and only one as “low priority”. The preliminary threat assessment indicated that 12 taxa may be Endangered, four Vulnerable and four Near Threatened. The taxa fill a wide range of climatic niches, both across and within taxa, including temperatures and precipitation. Main conclusions: Taxon richness hotspots, especially in northern Australia, represent hotspots for conservation action, including further seed collection and habitat protection, with Sorghum macrospermum E. D. Garber being the highest priority for increased in situ protection. Outside Australia, Sorghum propinquum (Kunth) Hitchc. stands out for further ex situ conservation, especially given its close relationship to the cro

Low frequency Raman studies of multi-wall carbon nanotubes: experiments and theory

In this paper, we investigate the low frequency Raman spectra of multi-wall carbon nanotubes (MWNT) prepared by the electric arc method. Low frequency Raman modes are unambiguously identified on purified samples thanks to the small internal diameter of the MWNT. We propose a model to describe these modes. They originate from the radial breathing vibrations of the individual walls coupled through the Van der Waals interaction between adjacent concentric walls. The intensity of the modes is described in the framework of bond polarization theory. Using this model and the structural characteristics of the nanotubes obtained from transmission electron microscopy allows to simulate the experimental low frequency Raman spectra with an excellent agreement. It suggests that Raman spectroscopy can be as useful regarding the characterization of MWNT as it is in the case of single-wall nanotubes.Comment: 4 pages, 2 eps fig., 2 jpeg fig., RevTex, submitted to Phys. Rev.

Microbial Monitoring Challenges and Needs for Mars Applications

The monitoring of microorganisms will be an important part of a mission to Mars. Microbial monitoring equipment will be needed to look for the presence of microorganisms on the planet, to confirm that planetary protection measures are working, to monitor the health of plants, bioreactors and humans living in a habitat and to monitor the performance of the life support systems that will keep them alive during their stay on Mars. Coordinating the different microbial monitoring needs during the early days of mission planning, can provide NASA with equipment that could meet more than one need while also providing complementary analysis options, which can enhance the research capabilities. The early coordination between the different NASA groups that will need microbial monitoring equipment on the surface of Mars, could also make the mission more affordable, as development of the needed equipment could be potentially cost shared

Pressure-Induced Interlinking of Carbon Nanotubes

We predict new forms of carbon consisting of one and two dimensional networks of interlinked single wall carbon nanotubes, some of which are energetically more stable than van der Waals packing of the nanotubes on a hexagonal lattice. These interlinked nanotubes are further transformed with higher applied external pressures to more dense and complicated stable structures, in which curvature-induced carbon sp$^{3}$ re-hybridizations are formed. We also discuss the energetics of the bond formation between nanotubes and the electronic properties of these predicted novel structures.Comment: 4 pages, 4 postscript figures; To be appear in PR

Establishment and metabolic analysis of a model microbial community for understanding trophic and electron accepting interactions of subsurface anaerobic environments

<p>Abstract</p> <p>Background</p> <p>Communities of microorganisms control the rates of key biogeochemical cycles, and are important for biotechnology, bioremediation, and industrial microbiological processes. For this reason, we constructed a model microbial community comprised of three species dependent on trophic interactions. The three species microbial community was comprised of <it>Clostridium cellulolyticum</it>, <it>Desulfovibrio vulgaris </it>Hildenborough, and <it>Geobacter sulfurreducens </it>and was grown under continuous culture conditions. Cellobiose served as the carbon and energy source for <it>C. cellulolyticum</it>, whereas <it>D. vulgaris </it>and <it>G. sulfurreducens </it>derived carbon and energy from the metabolic products of cellobiose fermentation and were provided with sulfate and fumarate respectively as electron acceptors.</p> <p>Results</p> <p>qPCR monitoring of the culture revealed <it>C. cellulolyticum </it>to be dominant as expected and confirmed the presence of <it>D. vulgaris </it>and <it>G. sulfurreducens</it>. Proposed metabolic modeling of carbon and electron flow of the three-species community indicated that the growth of <it>C. cellulolyticum </it>and <it>D. vulgaris </it>were electron donor limited whereas <it>G. sulfurreducens </it>was electron acceptor limited.</p> <p>Conclusions</p> <p>The results demonstrate that <it>C. cellulolyticum</it>, <it>D. vulgaris</it>, and <it>G. sulfurreducens </it>can be grown in coculture in a continuous culture system in which <it>D. vulgaris </it>and <it>G. sulfurreducens </it>are dependent upon the metabolic byproducts of <it>C. cellulolyticum </it>for nutrients. This represents a step towards developing a tractable model ecosystem comprised of members representing the functional groups of a trophic network.</p

Fundamental Phenomena on Fuel Decomposition and Boundary-Layer Combustion Precesses with Applications to Hybrid Rocket Motors

This final report summarizes the major findings on the subject of 'Fundamental Phenomena on Fuel Decomposition and Boundary-Layer Combustion Processes with Applications to Hybrid Rocket Motors', performed from 1 April 1994 to 30 June 1996. Both experimental results from Task 1 and theoretical/numerical results from Task 2 are reported here in two parts. Part 1 covers the experimental work performed and describes the test facility setup, data reduction techniques employed, and results of the test firings, including effects of operating conditions and fuel additives on solid fuel regression rate and thermal profiles of the condensed phase. Part 2 concerns the theoretical/numerical work. It covers physical modeling of the combustion processes including gas/surface coupling, and radiation effect on regression rate. The numerical solution of the flowfield structure and condensed phase regression behavior are presented. Experimental data from the test firings were used for numerical model validation