53 research outputs found
Investigation of the structure and hyperfine interactions in the intermetallic y'-Ni3Al phase doped with hafnium and iron
У овом раду истраживана су поликристална интерметална једињења γ′–Ni3Al са примесама атома хафнијума и γ′–Ni3Al са примесама атома гвожђа. Испитивања локалне структуре, магнетних и електричних особина γ′–Ni3Al једињења допираних атомима Hf или атомима Fe извршена су методама дифракције Х–зрачења, мерењима магнетизације, као и применом временски разложених пертурбованих угаоних корелација и спектроскопије Mössbauer–овог ефекта, које су омогућиле истраживања хиперфиних интеракција на језгрима примеса Hf и на језгрима примеса Fe. Ова експериментална истраживања испитиваних система су употпуњена прорачунима енергије дефеката, као и параметара структуре и хиперфиних интеракција на основу првих принципа. Главни циљ експерименталних истраживања и теоријских прорачуна интерметалне γ′– Ni3Al фазе са примесама атома хафнијума, односно гвожђа био је да се одреди преферентно позиционирање атома Hf, односно атома Fe у γ′–Ni3Al решетки, као и њихов утицај на кристалну решетку у коју се уграђују. Aнализoм дифракције Х–зрака испитиваних Hf допираних Ni3Al узорака утврђено је присуство кубне γ′ фазе (ознака L12) у испитиваним Hf–Ni3Al легурама, као и њене две тетрагоналне трансформације L60 и D022. Анализа је показала да је кубна L12 фаза доминантна у односу на тетрагоналне фазе испитиваних Hf–Ni3Al узорака. Мерења хиперфиних интеракција на проби 181Та, језгру–потомку 181Hf, у легурама 0.2, 0.5 и 5 at.% Hf – Ni3Al извршена су у температурском опсегу од 78 K до 1230 K. Измерене вредности хиперфиних параметара приписане су одређеним позицијама атома Hf у присутним Ni3Al фазама: L12, D022 и L60. Присуствo 181Ta–сигнала који је константан у времену кореспондира атомима Hf на позицији Al атома у доминантној L12 фази. За све три испитиване легуре, измерена нижа вредност спин независне електричне
iii
квадруполне фреквенције додељена је електричној квадруполној интеракцији која
дејствује на атоме Hf који су заменили атоме Al у тетрагоналној D022 фази.
Измерена виша вредност фреквенције кореспондира атомима Hf на позицијама
атома Al у тетрагоналној L60 фази.
Резултати прорачуна параметара хиперфиних интеракција, електронских и
структурних особина Hf–Ni3Al легура из првих принципа изведених методом
проширених равних таласа са локалним орбиталама коришћењем WIEN2k (“An
Augmented Plane Wave Plus Local Orbitals Program”) кода коректно репродукују
вредности добијене у експерименталним мерењима. Прорачуни енергије дефеката
базирани на теорији функционала густине изведени су VASP (“the Vienna ab–initio
simulation package”) кодом. Прорачунате електронске структуре проба у
разматрању са тачкастим групама симетрије њихових позиција помогли су у
идентификовању порекла хиперфиних интеракција и утврдили да је преферентна
позиција хафнијума на позицији коју заузимају атоми Al у Ni3Al.
Карактеризација узорака γ′–Ni3Al допираних гвожђем извршена је
дифракцијом Х–зрачења и мерењима магнетизације. Локална електронска и
магнетна структура, хиперфине интеракције пробе 57Fe, као и фазни састав легура
Ni2.82Fe0.18Al и Ni2.64Fe0.36Al истражени су спектроскопијом Mössbauеr–овог
ефекта. Резултати прорачуна електронских особина Fe–Ni3Al легура из првих
принципа методом пројектора проширених таласа као и резултати прорачуна
енергије дефеката објашњавају електронску структуру, хиперфине интеракције и
преферентну позицију атома Fe у легури γ′–Ni3Al са мањком никла. Вредност
израчунате највеће компоненте тензора градијента електричног поља, Vzz = 1.6
1021 Vm-2 на основу вредности параметара добијених из Mössbauеr–ових спектара,
указује да у обе испитиване легуре атоми гвожђа замењују атоме никла у γ′–Ni3Al.The dissertation addresses the local crystal structure and hyperfine interactions of hafnium or iron doped polycrystalline intermatallic γ′–Ni3Al alloys.
The local structure, magnetic and electrical properties of γ′–Ni3Al compounds doped with Hf atoms or Fe atoms were investigated by the X ray diffraction, magnetization, time differential perturbed angular correlation spectroscopy and Mössbauer–effect spectroscopy. The last two experimental methods provided insight into hyperfine interactions of Hf– and Fe–nucleus. This was complemented by the calculations of the energy of the defects, as well as with ab initio calculations of structural and hyperfine interactions parameters.
The main goal of the experimental and theoretical investigations of the intermetallic γ′–Ni3Al phase doped with Hf or Fe atoms was to determine the site preference of dopant atoms in the γ′–Ni3Al matrix, as well as their influence on the host lattice.
The X–ray diffraction measurements of the Hf doped Ni3Al samples revealed the presence of the cubic γ′ phase (usually denoted by L12) and its two tetragonal distortions: D022 and L60. The refinement of XRD data showed the dominant presence of the cubic L12 phase in the Hf–Ni3Al samples, with the minority presence of the two tetragonal phases. The measurements of the hyperfine interactions of the 181Та–probe in the 0.2, 0.5 and 5 at.% Hf – Ni3Al alloys (181Та–nucleus is the daughter–nucleus of the 181Hf–parent nucleus) were done in the temperature range 78 K to 1230 K. The measured hyperfine parameters values were assigned to the various Hf atom sites in the different crystal structures (cubic and tetragonal) present in the Ni3Al alloys. The presence of 181Та–signal constant in time is ascribed to Hf atoms at the Al sites in dominant L12 phase. For all investigated alloys, the lower value of the spin independent electric quadrupole frequency was ascribed to the electric quadrupole interaction of the Hf nuclei substituting on the Al sites in the tetragonal D022 phase in the Hf–Ni3Al v
alloys. The higher value of the spin independent electric quadrupole frequency corresponded to the electric quadrupole interactions of the Hf nuclei substituting on the Al sites in the tetragonal L60 phase in the Hf–Ni3Al alloys.
The ab initio calculations of electronic and structural properties and hyperfine parameters of the 181Ta ion probe in the Hf–Ni3Al alloys, performed using the full potential augmented plane wave plus local–orbital method as implemented in the WIEN2k code, correctly reproduce the experimental results. The DFT (density functional theory) calculations of point defect energies were done by using the Vienna ab initio simulation package VASP. The ab initio calculations enable discussion on the structural and electronic properties of the Ni3Al polycrystalline alloys.
The joint experimental and theoretical investigations enabled us to identify the observed hyperfine interactions and showed that hafnium additions prefer aluminum sites in Ni3Al.
The structural and magnetic characterizations of the Fe doped γ′–Ni3Al samples were done by the X–ray diffraction and magnetization measurements. The local electronic and magnetic structure, the hyperfine interactions of the 57Fe–probes, as well as the phase composition of the Ni2.82Fe0.18Al and Ni2.64Fe0.36Al alloys were investigated by means of the Mössbauer–effect spectroscopy. The ab initio calculations performed with the projector augmented wave method and the calculations of the energies of iron point defects were done to elucidate the electronic structure, the hyperfine interactions and site preference of Fe doped Ni–deficit γ′–Ni3Al. The value of calculated electric field gradient tensor Vzz = 1.6 1021 Vm-2 matches well with the results of Mössbauer spectroscopy and indicates weak preference of iron dopant atoms for Ni sites
The structure and electrochemical properties of fayalite Fe2SiO4
Fayalite has been found various applications in many fields. Here is presented its use as anode material for lithium ion batteries. The syntheses of Fe2SiO4 and its composite with carbon are conducted through solid-state reaction at 850 °C under inert atmosphere of argon, using cheap and abundant precursors (Fe(NO3)3×9H2O and amorphous silica). Citric acid served as carbon source. The phase-purity of synthesized powders is checked by X-ray powder diffraction. The crystal structure of the powders is refined in orthorhombic Pbnm space group. Half-cell configuration, with lithium metal as counter electrode and fayalite as working electrode, is used for electrochemical measurements: galvanostatic cycling and electrochemical impedance spectroscopy
Structural and electrochemical study of lithium iron (II) pyrophosphate
Lithium iron(II) pyrophosphate, Li2FeP2O7, attracts attention of researchers for application as a cathode material in rechargeable lithium batteries. Li2FeP2O7 has somewhat higher voltage than commercial LiFePO4 (3.5 and 3.4 V, respectively), thus enables higher energy density, and also provides the possibility of two-electron reaction during intercalation. Within this study, pristine Li2FeP2O7 and its composite with carbon Li2FeP2O7/C were synthesized, with the carbon being formed by the pyrolysis of organic precursor in situ during formation of Li2FeP2O7 at high temperature. The polymer of methylcellulose was used as carbon source because of its ability to reversibly, depending on temperature, dissolve or gel in water. The structural, electrical and electrochemical characteristics of prepared powders were investigated by means of X-ray diffraction analysis, Mossbauer spectroscopy, impedance spectroscopy and galvanostatic charge/discharge testing. The results imply that in situ formation of carbon alters lattice parameters, decreases crystallite size, and facilitates lithium ion intercalation/deintercalation processes. The Ministry of Education, Science and Technological Development of the Republic of Serbia provided financial support for this study under Grant No. III 4500
A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions
In order to study the effect of Fe cation substitution on the local structure, defect formation, and hyperfine interactions in ZnO, Mössbauer spectroscopy measurements of the microwave processed Zn1−xFexO (x=0.05, 0.10, 0.15, and 0.20) nanoparticles, together with ab initio calculations, were performed. Complementary information on the distribution of particle size and morphology, as well as magnetic properties, were obtained by X-ray diffraction, transmission electron microscopy, and squid-magnetometry. The selected model for analyzing the Mössbauer spectra of our samples is a distribution of quadrupole splittings. The fitting model with two Lorentz doublets was rejected due to its failure to include larger doublets. The Fe3+ ions do not yield magnetic ordering in the samples at room temperature. The results from first-principles calculations confirm that the major component of the Mössbauer spectra corresponds to the Fe-alloyed ZnO with Zn vacancy in the next nearest neighbor environment. The magnetic measurements are consistent with the description of the distribution of iron ions over the randomly formed clusters in the ZnO host lattice. While at room temperature all the samples are paramagnetic, magnetic interactions cause a transition into a cluster spin-glass state at low temperatures
Mineral Characterization of Soil Type Ranker Formed on Serpentines Occurring in Southern Belgrade Environs Bubanj Potok
The paper addresses the issue of health risk associated with the presence of chrysotile in the soil type ranker formed on massive serpentines occurring in the area of Bubanj Potok, a settlement located in the southern Belgrade environs, Serbia. Characterization of the ranker soil was conducted by scanning electron microscopy, X-ray diffraction, micro-Raman spectroscopy and transmission Fe-57 Mossbauer spectroscopy. Scanning electron microscopy figures showed regular shaped smectite (montmorillonite) particles, aggregates of chlorite, and elongated sheets of serpentines minerals antigorite. X-ray diffraction analysis confirmed the presence of detrital mineral quartz polymorph as well as minor amounts of other mineral species. Micro-Raman spectroscopy identified the presence of dominant minerals, such as montmorillonite, kaolinite, muscovite, gypsum, calcite, albite, amphiboles (hornblende/kaersutite) and orthoclase. Important polymorph silica modifications of quartz, olivine (forsterite), pyroxene (enstatite/ferrosilite, diopside/hedenbergite), and serpentine (antigorite/lizardite/chrysotile) were identified
Enhanced superconductivity and electron correlations in intercalated ZrTe3
Charge density waves (CDWs) with superconductivity, competing Fermi surface instabilities, and collective orders have captured much interest in two-dimensional van der Waals (vdW) materials. Understanding the CDW suppression mechanism, its connection to the emerging superconducting state, and electronic correlations provides opportunities for engineering the electronic properties of vdW heterostructures and thin-film devices. Using a combination of the thermal transport, x-ray photoemission spectroscopy, Raman measurements, and first-principles calculations, we observe an increase in electronic correlations of the conducting states as the CDW is suppressed in ZrTe3 with 5% Cu and Ni intercalation in the vdW gap. As superconductivity emerges, intercalation brings not only decoupling of quasi-one-dimensional conduction electrons with phonons as a consequence of intercalation-induced lattice expansion but also a drastic increase in Zr2+ at the expense of Zr4+ metal atoms. These observations not only demonstrate the potential of atomic intercalates in the vdW gap for ground-state tuning but also illustrate the crucial role of the Zr metal valence in the formation of collective electronic orders
Perturbed Angular Correlation Investigation of the Electric Field Gradient At Ta-181 Probe in the Hf2ni7 Compound
The perturbed angular correlation method was employed to study the temperature dependence of electric field gradients at the Ta-181 probe in the polycrystalline Hf2Ni7 compound. The temperature evolution of the sample content was measured using high-temperature X-ray diffraction. To check the magnetic order of the sample, magnetization measurements and additional perturbed angular correlation measurements with externally applied magnetic field were performed. All obtained spectra showed no evidence of magnetic order of the Hf2Ni7 phase. Within the experimental resolution of the apparatus, the measured electric field gradients at Ta-181 probe for the two inequivalent Hf-181/Ta-181 sites in the Hf2Ni7 compound appeared as one in the range of 78-944 K. A single quadrupole interaction implies that the electric field gradients at the two Hf sites must be quite similar. At 293 K, the measured quadrupole interaction parameters are v(Q) = 433(1) MHz and eta = 0.300(4). An increase of the quadrupole frequency and a gradual rising of the asymmetry parameter were observed with increasing temperature. The high-temperature X-ray diffraction indicated a build up of HfO2 above 693 K
Point defect-enhanced optical and photoelectrochemical water splitting activity of nanostructured Zn1-xFeyO(1-x+1.5y)
Even has been under study since 1935, zinc oxide (ZnO) based materials still attract a huge scientific attention. Owing to a wide band gap energy (3.37 eV at room temperature) and a large exciton binding energy (60 meV) ZnO has a variety of application, e.g. in electronics, optoelectronics, spintronics and photocatalysis. Besides, it has been shown that zinc oxide-based materials have a great potential as photoelectrocatalysts in the processes of water splitting, yielding an increased both photocurrent density and photoconversion efficiency. However, with a band gap energy of 3.37 eV, ZnO is restricted to absorb UV light only. This restriction can be overcome by modifying optical properties of zinc oxide particles. During the years different approaches have been applied to modify the visible light photocatalytic activity of ZnO materials, for example: (1) metal and nonmetal ion doping, (2) hydrogenation, (3) the incorporation of crystalline defects in the form of vacancies and interstitials, (4) the modification of particles morphology and surface topology, etc.
In this study we employed 3d metal ion substitution to improve visible light-driven photoactivity of zinc oxide particles. We investigated the influence of Fe concentration in Zn1-xFeyO(1-x+1.5y) nanoparticles on crystal structure, textural, optical and photoelectrocatalytic properties. Zn1-xFeyO(1-x+1.5y) nanoparticles with nominally 5, 10, 15 and 20 at.% of Fe ions were synthesized by microwave processing of a precipitate. The crystal structure and phase purity of the samples were investigated by X-ray diffraction, Raman and ATR-FTIR spectroscopy. Mössbauer spectroscopy was carried out to clarify the valence state of the iron ions in the ZnO crystal structure. Effects of the iron ions concentration on particles morphology and texture properties were observed with field emission scanning electron microscopy (FE–SEM), transmission electron microscopy (TEM) with elemental mapping, and nitrogen adsorption–desorption isotherm, respectively. The optical properties were studied using UV–Vis diffuse reflectance and photoluminescence (PL) spectroscopy. Photoelectrochemical activity of the Zn1-xFeyO(1-x+1.5y) samples as anode material was evaluated by linear sweep voltammetry in Na2SO4 electrolyte; the oxygen evolution kinetics were determined and compared. In addition, a series of first principles calculations were performed to address the influence of the iron concentration on the electronic structure of Zn1-xFeyO(1-x+1.5y) samples
Yttrium Orthoferrite Powder Obtained by the Mechanochemical Synthesis
Yttrium orthoferrite (YFeO3) powder was prepared by a mechanochemical synthesis from a mixture of Y2O3 and alpha-Fe2O3 powders in a planetary ball mill for 2.5 h. The obtained YFeO3 powder sample was characterized by X-ray diffraction (XRD), Raman and infrared spectroscopy. The average crystallite size calculated by the Scherrer equation was 12 nm. The Mossbauer spectroscopy at room temperature confirms the superparamagnetic character of YFeO3 orthoferrite sample
D7.3 - Data Management Plan
This document describes the initial version of the Data Management Plan (DMP) for the WaPoDe project. The overall objective of the WaPoDe project is to synthetize materials with enhanced sensitivity, selectivity, and response time as electrochemical sensors (ECS) for detection and monitoring of different pharmaceutical and pesticide pollutants in water and to reduce ECS manufacturing costs. The focus of the WaPoDe project is on ZnO-based electrochemical sensors. The database will be developed under the WaPoDe project with the main purpose to summarize the WaPoDe research results on the types, properties, and application of ZnO-based nanoparticles as selective ECS.
This initial DMP provides information on the data management principles that will be implemented during and for a certain period after the WaPoDe project completion. It is based on the Data Management Plan template (https://enspire.science/wp-content/uploads/2021/09/Horizon-Europe-Data-Management-Plan-Template.pdf) which follows the guidelines from Europe Horizon calls. This DMP will be regularly updated as the implementation of the project progresses. The draft DMP was developed within the project workpackages
- …