Electronic phase separation near the superconductor-insulator transition of Nd1+xBa2−xCu3O7−δ thin films studied by an electric-field-induced doping effect

We report a detailed study of the transport properties of Nd(1+x)Ba(2-x)Cu(3)O(7-delta) thin films with doping changed by field effect. The data cover the whole superconducting to insulating transition and show remarkable Similarities with the effect of chemical doping in high critical temperature superconductors. The results suggest that the add-on of carriers is accompanied by an electronic phase separation, independent on the details of the doping mechanism

Microwave intermodulation distortion of MgB2 thin films

The two tone intermodulation arising in MgB2 thin films deposited in-situ by planar magnetron sputtering on sapphire substrates is studied. Samples are characterised using an open-ended dielectric puck resonator operating at 8.8 GHz. The experimental results show that the third order products increase with the two-tone input power with a slope ranging between 1.5 and 2.3. The behaviour can be understood introducing a mechanism of vortex penetration in grain boundaries as the most plausible source of non linearities in these films. This assumption is confirmed by the analysis of the field dependence of the surface resistance, that show a linear behaviour at all temperatures under test.Comment: 13 pages, 3 figures; to be published in Appl. Phys. Let

A novel thermo-geometrical model for accurate keyhole porosity prediction in Laser Powder-Bed Fusion

When performing Laser Powder-Bed Fusion, undesired physical phenomena, such as balling, preballing and keyhole, must be avoided in order to achieve high-quality products. To date, keyhole-free process parameters can be identified either using demanding empirical methods or complex numerical simulations, while only a few analytical models can be found in literature for this purpose. In this work, state-of-the-art analytical models for predicting keyhole porosity were summarized and proved to be rather inaccurate because they are only based on thermodynamic principles, whereas they neglect the geometry and both the kinetics and kinematics of the keyhole cavity, which do also influence cavity collapse and porosity formation. Here an innovative physics-based semi-analytical model for predicting the formation of keyhole-related porosities was conceived, in which both thermodynamic and geometrical factors are taken into account. The proposed model was validated by performing single tracks experiments on Ti6Al4V according to a full factorial DoE on laser power and scanning speed. Produced samples were cross-sectioned and analyzed to evaluate keyhole porosity formation. The comparison between experimental data and model predictions confirmed the higher accuracy of the new model with respect to state of the art models. Besides improving the understanding of the keyhole phenomenon, the proposed model may provide a novel, effective and simple tool for fast process parameter optimization in industry

Does degradation from selective logging and illegal activities differently impact forest resources? A case study in Ghana

Degradation, a reduction of the ecosystem’s capacity to supply goods and services, is widespread in tropical forests and mainly caused by human disturbance. To maintain the full range of forest ecosystem services and support the development of effective conservation policies, we must understand the overall impact of degradation on different forest resources. This research investigates the response to disturbance of forest structure using several indicators: soil carbon content, arboreal richness and biodiversity, functional composition (guild and wood density), and productivity. We drew upon large field and remote sensing datasets from different forest types in Ghana, characterized by varied protection status, to investigate impacts of selective logging, and of illegal land use and resources extraction, which are the main disturbance causes in West Africa. Results indicate that functional composition and the overall number of species are less affected by degradation, while forest structure, soil carbon content and species abundance are seriously impacted, with resources distribution reflecting the protection level of the areas. Remote sensing analysis showed an increase in productivity in the last three decades, with higher resiliency to change in drier forest types, and stronger productivity correlation with solar radiation in the short dry season. The study region is affected by growing anthropogenic pressure on natural resources and by an increased climate variability: possible interactions of disturbance with climate are also discussed, together with the urgency to reduce degradation in order to preserve the full range of ecosystem functions

Protein Kinase CK2 Mutants Defective in Substrate Recognition PURIFICATION AND KINETIC ANALYSIS

Five mutants of protein kinase CK2 α subunit in which altogether 14 basic residues were singly to quadruply replaced by alanines (K74A,K75A,K76A,K77A; K79A, R80A,K83A; R191A,R195A,K198A; R228A; and R278A, K279A,R280A) have been purified to near homogeneity either as such or after addition of the recombinant β subunit. By this latter procedure five mutated tetrameric holoenzymes were obtained as judged from their subunit composition, sedimentation coefficient on sucrose gradient ultracentrifugation, and increased activity toward a specific peptide substrate as compared with the isolated α subunits. The kinetic constants and the phosphorylation efficiencies (Vmax/Km) of all the mutants with the parent peptide RRRADDSDDDDD and a series of derivatives, in which individual aspartic acids were replaced by alanines, have been determined. Three mutants, namely K74A,K75A,K76A,K77A; K79A,R80A, K83A; and R191A,R195A,K198A display dramatically lower phosphorylation efficiency and 8-50-fold higher Km values with the parent peptide, symptomatic of reduced attitude to bind the peptide substrate as compared with CK2 wild type. Such differences either disappear or are attenuated if the mutants R191A,R195A, K198A; K79A,R80A,K83A; and K74A,K75A,K76A,K77A are assayed with the peptides RRRADDSADDDD, RRRADDSDDADD, and RRRADDSDDDAA, respectively. In contrast, the phosphorylation efficiencies of the other substituted peptides decrease more markedly with these mutants than with CK2 wild type. These data show that one or more of the basic residues clustered in the 191-198, 79-83, and 74-77 sequences are implicated in the recognition of the acidic determinants at positions +1, +3, and +4/+5, respectively, and that if these residues are mutated, the relevance of the other acidic residues surrounding serine is increased. In contrast the other two mutants, namely R228A and R278A,K279A, R280A, display with all the peptides Vmax values higher than CK2 wild type, counterbalanced however by somewhat higher Kmvalues. It can be concluded from these data that all the five mutations performed are compatible with the reconstitution of tetrameric holoenzyme, but all of them influence the enzymatic efficiency of CK2 to different extents. Although the basic residues mutated in the 74-77, 79-83, and 191-198 sequences are clearly implicated in substrate recognition by interacting with acidic determinants at variable positions downstream from serine, the other basic residues seem to play a more elusive and/or indirect role in catalysis

Effects of post-printing heat treatment on microstructure, corrosion and wet wear behavior of CoCrW alloy produced by L-PBF process

CoCr alloys are widely used as human implants because of both their superior corrosion resistance and superior mechanical properties (fatigue, wear resistance, etc.) respect to other metal alloys used in biomedical field. In particular, CoCrW alloys are used mainly to produce dental implants. In this study, the effects of thermal treatment on the corrosion resistance and wet wear resistance of CoCrW alloys produced via Laser-Powder Bed Fusion (L-PBF) were investigated, and the corrosion resistance and wet wear resistance of the L-PBF specimens were compared with those of the specimens obtained after forging. The heat treatment involved the solubilization of the alloy at 1150 °C in an Ar-saturated atmosphere, followed by furnace cooling. A detailed microstructural characterization of the L-PBF specimens was carried out using a light microscope and a scanning electron microscope in both the horizontal and vertical growth directions. Scanning Kelvin probe measurements were performed on the heat-treated specimens obtained by three-dimensional printing and forging. The void contents of the specimens were evaluated using the Archimedes’ method and image analysis. Vickers (HV2) hardness measurements were performed to evaluate the mechanical properties of the specimens. The corrosion properties of the specimens were evaluated by carrying out potentiodynamic tests in two different corrosive media (aqueous solution (9 g/L NaCl) at pH = 2 and 7). The corroded areas of the specimens were then examined using scanning electron microscopy (SEM). Finally, tribological tests were performed using the pin (Ti counter material)-on-flat configuration under dry and wet conditions, using the same corrosive environments as those used in the potentiodynamic tests and two different stroke lengths. The worn samples were characterized using SEM to investigate their wear mechanisms, and a stylus profilometer was used to determine the wear rates of the materials. The experimental results showed that the additively manufactured CoCrW L-PBF alloy had higher corrosion resistance than the wrought material. In addition, the additively manufactured material showed better dry and wet wear performances than the wrought material. Nevertheless, the heat treatment did not affect the properties evaluated in this study

Results of patch-grafting of tissue infected by ‘Candidatus Phytoplasma pyri’ or by ‘Candidatus Phytoplasma prunorum’, respectively on pear and apricot plants cultivated in pot

Molecular analyses carried out either on the pear varieties ‘Conference’, ‘Comice’ and ‘William’ grafted on different rootstocks or on sixty-eight apricot varieties grafted on Myrobalan, showed the susceptibility of the tested combinations to 'Candidatus Phytoplasma pyri', transmitted by Cacopsylla pyri, and to 'Candidatus Phytoplasma prunorum', transmitted by Empoasca decedens, respectively. In order to find pear and/or apricot combinations immune to the associated Phytoplasma, several varieties grafted on new rootstock were tested in the period 2002-2008. 68 pear plants belonging to seven variety/rootstock combinations and 76 apricot plants belonging to seven combinations, all cultivated in pot, in greenhouse covered by anti-aphid tissue, were grafted with patches of infected tissues containing the specific phytoplasmas. Young healthy potted plants belonging to the pear combination ‘Comice’/P. communis and to the apricot combination ‘Palummella’/Myrobalan, both susceptible in open field to the associated phytoplasmas transmitted by the specific vectors, were also used and patch-grafted. Molecular analyses, carried out on nucleic acids extracted from leaf samples, to detect the presence of the pathogens, showed the pear variety ‘William’ grafted on Pyrus betulaefolia to be susceptible to 'Candidatus Phytoplasma pyri’. Neither the pear combination ‘Comice’/P. communis nor the apricot ‘Palummella’/Myrobalan 29 C, susceptible, in open field, to the associated phytoplasmas, became infected after patchgrafting under greenhouse conditions. Thus the results show that patch-grafting cannot be utilized in young potted plants for artificial transmission of these two phytoplasmas.Keywords: Phytoplasmas, source of immunity, variety/rootstock combination, molecular tests, insect proof green-hous

Single tracks data obtained by selective laser melting of Ti6Al4V with a small laser spot diameter

Nowadays, advanced metal components with high geometrical complexity can be 3D printed by using the Selective Laser Melting (SLM) technology. Despite SLM resolution and accuracy are generally limited to some tenths of mm, it should be possible to produce finer and more precise details by applying lasers with a small spot diameter. However, to present date the data collected with small laser spot diameters are poor. In this work, experimental data describing the effects of laser power and scan speed on single track formation when applying a small laser spot diameter of 50 \ub5m on Ti6Al4V powder are reported. SEM images and the extracted geometrical data characterizing the obtained single tracks are provided here, as well as their microstructural analysis and microhardness measurements