High-speed low-power modulator driver arrays for medium-reach optical networks

The internet is becoming the ubiquitous tool that is changing the lives of so many citizens across the world. Commerce, government, industry, healthcare and social interactions are all increasingly using internet applications to improve and facilitate communications. This is especially true for videoenabled applications, which currently demand much higher data rates and quality from data networks. High definition TV streaming services are emerging and these again will significantly push the demand for widely deployed, high-bandwidth services. The current access passive optical networks (PONs) use a single wavelength for downstream transmission and a separate one for upstream transmission. Incorporating wavelength-division multiplexing (WDM) in a PON allows for much higher bandwidths in both directions. While WDM technologies have been successfully deployed for many years in metro and core networks, in access networks they are not commonly used yet. This is mainly due to the high costs associated with deploying entire WDM access networks. However, the present optical networks cannot be simply and cost-effectively scaled to provide the capacity for tomorrow’s users. As an effect there is a strong need for new WDM access components which are compact, cost-competitive and mass-manufacturable. Increasing the number of wavelengths for WDM-PON automatically leads to an increase in the number of single pluggable transceivers, which brings substantial design challenges and additional costs. The multitude of TXs and RXs for different wavelength channels increases the total footprint considerably. Photonic integration of transceivers into arrays will significantly reduce the footprint and cost. However, the total power consumption of an array device is an issue. To avoid the use of a thermoelectric cooler, the integration density of components is severely limited by the heat dissipating capabilities offered by their package. As a result the WDM-PON philosophy necessitates the reduction of the transceiver’s power dissipation. From this plea it is apparent that the main technology challenges for realizing future-proof optical (access) networks are reducing active component power consumption, shrinking form factors and lowering assembly costs. In this perspective an over 100 Gb/s throughput component, composed of 10 channels at 11.3 Gb/s per wavelength channel would be a great contribution to the expansion of customer bandwidth. It can provide increased line rates to the end users at speeds of 10 Gb/s per wavelength. As RXs typically consume much less power than externally modulated TXs, they can relatively easily be integrated into an array. Mainly high speed optical transmitters have significant power consumptions and the heat generation caused by power dissipation forms a critical obstacle in the development of a 10-channel transmitter, which again underlines the importance of power reduction. Alongside the introduction of WDM in access networks, also inter-office point-to-point connections in data center environments could benefit from the WDM philosophy. As data center operators often suffer from fiber scarcity or do not own their fiber infrastructure, WDM technologies are essential to deliver reach and capacity extension for these scenarios. Interdata center communication also benefits from cost-, footprint- and energyefficient components operating at high speed to maximize the throughput. As an effect integrated over 100 Gb/s transceivers, such as 4 channels at 28 Gb/s, are highly desirable. The research described in this dissertation was partly funded by the European FP7 ICT project C3PO (Colourless and Coolerless Components for low Power Optical Networks) and the UGent special research fund. The C3PO project aimed to develop a new generation of green Si-photonic compatible components with record low power consumption, that can enable bandwidth growth and constrain the total cost. C3PO envisioned building high-capacity access networks employing reflective photonic components. To achieve this, cost-competitive reflective transmitters based on electroabsorption modulators (EAM) needed to be closely integrated into arrays. A multi-wavelength optical source provides the required wavelength channels for both downstream and upstream signals in the WDM-PON. Chapter 1 gives a short overview of a PON and describes the main implementations of a WDM-PON access network. It introduces integrated low power transmitter arrays for a cost-effective architecture of WDM-PONs and inter-data center communication. Chapter 2 compares different optical transmitters and gives a short overview of their most important characteristics. External modulation through both Mach-Zehnder modulators (MZMs) and EAMs is described. It shows that EAMs are the best choice for low power transmitter array integration, thanks to their lower drive voltage and smaller form factor, compared to MZMs. To achieve a reduced consumption, the electronic modulator driver topology is studied in chapter 3. The challenge in designing modulator drivers is the need to deliver very large currents in combination with high voltage swings. Four distinct output configurations are compared and techniques to reduce the power consumption of the drivers are described. Chapter 5 presents duobinary (DB), a modulation scheme that is gaining interest in today’s optical transmission. As the required bandwidth is about half that of NRZ, it softens the constraints on the transmitter bandwidth. Thanks to its narrow optical spectrum, it has an improved tolerance to dispersion in long haul single mode links and it can improve the spectral efficiency in WDM architectures. For optical DB a precoder is necessary to assure the received signal is equal to the original binary signal. The conducted research that resulted in this dissertation produced 2 low power EAM driver arrays: A 10-channel 113 Gb/s modulator driver array with state-of-the art ultra-low power consumption. A 2-channel 56 Gb/s duobinary driver array with a differential output with low power consumption. Both designs are elaborately analyzed in chapter 4 and 6 respectively. To the best of our knowledge the 10-channel EAM driver array is the first in its kind, while achieving the lowest power consumption for an EAM driver so far reported, 50% below the state of the art in power consumption. The 2-channel EAM driver array is the fastest modulator driver including on-chip duobinary encoding and precoding reported so far. The final chapter provides an overview of the foremost conclusions from the presented research. It is concluded with suggestions for further research

Evaluation of a discrete 4-PAM optical link for future automotive networks

A comparative study is presented between NRZ and 4-PAM to investigate the feasibility of Gigabit transmission in automotive optical networks. The system utilizes a SI-PCS fiber and an 850 nm VCSEL as transmitter. Laser driver and receiver are realized with discrete transistors at board level. Eye diagram measurements reveal that 4-PAM outperforms NRZ using 1m and 6m of fiber. Bitrates of 2 Gb/s are achieved at a BER ≤ 100000. Covering longer distances shows that SI-PCS introduces severe dispersion. Therefore, GI-PCS fiber is suggested as optical link for future automotive networks

A low power 2 x 28 Gb/s electroabsorption modulator driver array with on-chip duobinary encoding

An integrated 2 x 28 Gb/s dual-channel duobinary driver IC is presented. Each channel has integrated coding blocks, transforming a non-return-to-zero input signal into a 3-level electrical duobinary signal to achieve an optical duobinary modulation. To the best of our knowledge this is the fastest modulator driver including on-chip duobinary encoding and precoding. Moreover, it only consumes 652 mW per channel at a differential output swing of 6 V-pp

40 Gb/s PAM-4 transmitter IC for long-wavelength VCSEL links

Conventional 850 nm multimode fiber links deployed in warehouse-scale data centers will be limited by modal dispersion beyond 10 Gb/s when covering distances up to 1 km. This can be resolved by opting for a single-mode fiber (SMF), but typically requires the use of power-hungry edge-emitting lasers. We investigate the feasibility of a high-efficiency SMF link by reporting a 0.13 mu m SiGe BiCMOS laser diode driver optimized for long-wavelength vertical-cavity surface-emitting lasers (VCSELs). Bit-error rate experiments at 28 and 40 Gb/s up to 1 km of SMF reveal that four-level pulse amplitude modulation can compete with non-return-to-zero in terms of energy efficiency and scalability. With 9.4 pJ/b, the presented transmitter paves the way for VCSEL-based SMF links in data centers

Segmented optical transmitter comprising a CMOS driver array and an InP IQ-MZM for advanced modulation formats

Segmented Mach-Zehnder modulators are promising solutions to generate complex modulation schemes in the migration towards optical links with a higher-spectral efficiency. We present an optical transmitter comprising a segmented-electrode InP IQ-MZM, capable of multilevel optical signal generation (5-bit per I/Q arm) by employing direct digital drive from integrated, low-power (1W) CMOS binary drivers. We discuss the advantages and design tradeoffs of the segmented driver structure and the implementation in a 40 nm CMOS technology. Multilevel operation with combined phase and amplitude modulation is demonstrated experimentally on a single MZM of the device for 2-ASK-2PSK and 4-ASK-2-PSK, showing potential for respectively 16-QAM and 64-QAM modulation in future assemblies

Performance evaluation of single carrier 40-Gbit/s downstream for long-reach passive optical network

This paper presents a new long reach PON (LR-PON) scenario operating at a single carrier of 40-Gbit/s for downstream, as an upgrade option of the LR-PON evolutionary strategy. An electrical 3-level duobinary modulation format was proposed for the 40-Gbit/s downstream transmission. In this paper the required optical signal to noise ratio (OSNR) and optical power budget were investigated based on analytic calculation of OSNR requirements and cascaded analysis with an optical link model. Numerical simulation results show that the 40-Gbit/s downstream operating at the wavelength of 1.5 μm can support a long reach up to 100 km and a high split ratio up to 256

Multi-level optical signal generation using a segmented-electrode InP IQ-MZM with integrated CMOS binary drivers

We present a segmented-electrode InP IQ-MZM, capable of multi-level optical signal generation (5-bit per I/Q arm) by employing direct digital drive from integrated, low-power (1W) CMOS binary drivers. Programmable, multi-level operation is demonstrated experimentally on one MZM of the device

Adaptive transmit-side equalization for serial electrical interconnects at 100 Gb/s using duobinary

The ever-increasing demand for more efficient data communication calls for new, advanced techniques for high speed serial communication. Although newly developed systems are setting records, off-line determination of the optimal equalizer settings is often needed. Well-known adaptive algorithms are mainly applied for receive-side equalization. However, transmit-side equalization is desirable for its reduced linearity requirements. In this paper, an adaptive sign-sign least mean square equalizer algorithm is developed applicable for an analog transmit-side feed-forward equalizer (FFE) capable of transforming non-return-to-zero modulation to duobinary (DB) modulation at the output of the channel. In addition to the derivation of the update strategy, extra algorithms are developed to cope with the difficult transmit-receive synchronization. Using an analog six tap bit-spaced equalizer, the algorithm is capable of optimizing DB communication of 100Gb/s over 1.5-m Twin-Ax cable. Both simulations and experimental results are presented to prove the capabilities of the algorithm demonstrating automated determination of FFE parameters, such that error-free communication is obtained (BER<10(-13) using PRBS9)

Demonstration of multi-channel 80 Gbit/s integrated transmitter and receiver for wavelength-division multiplexing passive optical network and fronthauling applications

The performance evaluation of a multi-channel transmitter that employs an arrayed reflective electroabsorption modulator-based photonic integrated circuit and a low-power driver array in conjunction with a multi-channel receiver incorporating a pin photodiode array and integrated arrayed waveguide grating is reported. Due to their small footprint, low power consumption and potential low cost, these devices are attractive solutions for future mobile fronthaul and next generation optical access networks. A BER performance of <10(-9) at 10.3 Gbit/s per channel is achieved over 25 km of standard single mode fibre. The transmitter/receiver combination can achieve an aggregate bit rate of 82.4 Gbit/s when eight channels are active