967 research outputs found

    Millimetric Astronomy from the High Antarctic Plateau: site testing at Dome C

    Get PDF
    Preliminary site testing at Dome C (Antarctica) is presented, using both Automatic Weather Station (AWS) meteorological data (1986-1993) and Precipitable Water Vapor (PWV) measurements made by the authors. A comparison with South Pole and other sites is made. The South Pole is a well established astrophysical observing site, where extremely good conditions are reported for a large fraction of time during the year. Dome C, where Italy and France are building a new scientific station, is a potential observing site in the millimetric and sub-millimetric range. AWS are operating at both sites and they have been continuously monitoring temperature, pressure, wind speed and direction for more than ten years. Site testing instruments are already operating at the South Pole (AASTO, Automated Astrophysical Site-Testing Observatory), while ''light'' experiments have been running at Dome C (APACHE, Antarctic Plateau Anisotropy CHasing Experiment) during summertime. A direct comparison between the two sites is planned in the near future, using the AASTO. The present analysis shows that the average wind speed is lower at Dome C (~1 m/s) than at the South Pole (~2 m/s), while temperature and PWV are comparable.Comment: 10 pages, 8 figures, se also http://www.atnf.csiro.au/pasa/16_2

    Stomach Content Analysis of Recent Snowy Owl (\u3ci\u3eBubo scandiacus\u3c/i\u3e) Specimens from Nebraska

    Get PDF
    The Snowy Owl (Bubo scandiacus) is a circumpolar bird of prey that breeds in extreme northern latitudes, including Canadian and Alaskan tundra. During winter months, some immature and non-breeding birds disperse south. North American birds may travel to southern Canada and northern parts of the United States, and in some extreme cases as far south as Oklahoma and Texas (Parmelee 1992). Although not fully understood, these irruptive events may be caused by the abundance of prey in northern Canada and Alaska (Parmelee 1992). Prey typical of Snowy Owls are small mammals (e.g., lemmings and hares) of their home range and an occasional bird from a variety of species including waterfowl (Parmelee, 1992). Research on prey items selected by birds outside of breeding range in North America primarily includes ducks and grebes in southwest British Columbia (Campbell and Maccoll 1978), voles in Montana (Detienne et al. 2008), and mice and voles in southern Alberta and Michigan (Boxall and Lein 1982, Chamberlin 1980, respectively). Over the past century, several irruptions of Snowy Owls have been recorded in Nebraska, most notably during the winters of 1917-18, 1954-55, and 2011-12 (Jorgensen et al., 2012). The most recent of these irruptions, during the winter of 2011-12, produced the largest number of confirmed Snowy Owl sightings in Kansas and Missouri, possibly explained by the increased ease of communication through the use of mobile technology in the general public (Robbins and Otte 2013). Once reaching areas as far south as Nebraska, Snowy Owls typically suffer high rates of mortality, possibly due to lack of prey species, disease, or anthropogenic factors (Kerlinger and Lein 1988, Meade 1942). During the 2011-12 irruption, several carcasses were donated to the University of Nebraska State Museum (UNSM) and provided a source for examination of body condition and diet. Also included was one carcass donated to UNSM during the following winter, 2012-13

    The Planck Low Frequency Instrument

    Get PDF
    The Low Frequency Instrument (LFI) of the "Planck Surveyor" ESA mission will perform high-resolution imaging of the Cosmic Microwave Background anisotropies at four frequencies in the 30-100 GHz range. We review the LFI main scientific objectives, the current status of the instrument design and the on-going effort to develop software simulations of the LFI observations. In particular we discuss the design status of the PLANCK telescope, which is critical for reaching adequate effective angular resolution.Comment: 10 pages, Latex (use epsfig.sty); 4 Postscript figures; Astrophys. Lett & Comm, in press. Proc. of the Conference: "The Cosmic Microwave Background and the Planck Mission", Santander, Spain, 22-25 June 199

    Planck Low Frequency Instrument: Beam Patterns

    Full text link
    The Low Frequency Instrument on board the ESA Planck satellite is coupled to the Planck 1.5 meter off-axis dual reflector telescope by an array of 27 corrugated feed horns operating at 30, 44, 70, and 100 GHz. We briefly present here a detailed study of the optical interface devoted to optimize the angular resolution (10 arcmin at 100 GHz as a goal) and at the same time to minimize all the systematics coming from the sidelobes of the radiation pattern. Through optical simulations, we provide shapes, locations on the sky, angular resolutions, and polarization properties of each beam.Comment: On behalf of the Planck collaboration. 3 pages, 1 figure. Article published in the Proceedings of the 2K1BC Experimental Cosmology at millimetre wavelength

    Dynamic validation of the Planck/LFI thermal model

    Get PDF
    The Low Frequency Instrument (LFI) is an array of cryogenically cooled radiometers on board the Planck satellite, designed to measure the temperature and polarization anisotropies of the cosmic microwave backgrond (CMB) at 30, 44 and 70 GHz. The thermal requirements of the LFI, and in particular the stringent limits to acceptable thermal fluctuations in the 20 K focal plane, are a critical element to achieve the instrument scientific performance. Thermal tests were carried out as part of the on-ground calibration campaign at various stages of instrument integration. In this paper we describe the results and analysis of the tests on the LFI flight model (FM) performed at Thales Laboratories in Milan (Italy) during 2006, with the purpose of experimentally sampling the thermal transfer functions and consequently validating the numerical thermal model describing the dynamic response of the LFI focal plane. This model has been used extensively to assess the ability of LFI to achieve its scientific goals: its validation is therefore extremely important in the context of the Planck mission. Our analysis shows that the measured thermal properties of the instrument show a thermal damping level better than predicted, therefore further reducing the expected systematic effect induced in the LFI maps. We then propose an explanation of the increased damping in terms of non-ideal thermal contacts.Comment: Planck LFI technical papers published by JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/1748-022

    Millimeter and sub-millimeter atmospheric performance at Dome C combining radiosoundings and ATM synthetic spectra

    Full text link
    The reliability of astronomical observations at millimeter and sub-millimeter wavelengths closely depends on a low vertical content of water vapor as well as on high atmospheric emission stability. Although Concordia station at Dome C (Antarctica) enjoys good observing conditions in this atmospheric spectral windows, as shown by preliminary site-testing campaigns at different bands and in, not always, time overlapped periods, a dedicated instrument able to continuously determine atmospheric performance for a wide spectral range is not yet planned. In the absence of such measurements, in this paper we suggest a semi-empirical approach to perform an analysis of atmospheric transmission and emission at Dome C to compare the performance for 7 photometric bands ranging from 100 GHz to 2 THz. Radiosoundings data provided by the Routine Meteorological Observations (RMO) Research Project at Concordia station are corrected by temperature and humidity errors and dry biases and then employed to feed ATM (Atmospheric Transmission at Microwaves) code to generate synthetic spectra in the wide spectral range from 100 GHz to 2 THz. To quantify the atmospheric contribution in millimeter and sub-millimeter observations we are considering several photometric bands in which atmospheric quantities are integrated. The observational capabilities of this site at all the selected spectral bands are analyzed considering monthly averaged transmissions joined to the corresponding fluctuations. Transmission and pwv statistics at Dome C derived by our semi-empirical approach are consistent with previous works. It is evident the decreasing of the performance at high frequencies. We propose to introduce a new parameter to compare the quality of a site at different spectral bands, in terms of high transmission and emission stability, the Site Photometric Quality Factor.Comment: accepted to MNRAS with minor revision

    The Planck-LFI flight model composite waveguides

    Get PDF
    The Low Frequency Instrument on board the PLANCK satellite is designed to give the most accurate map ever of the CMB anisotropy of the whole sky over a broad frequency band spanning 27 to 77 GHz. It is made of an array of 22 pseudo-correlation radiometers, composed of 11 actively cooled (20 K) Front End Modules (FEMs), and 11 Back End Modules (BEMs) at 300K. The connection between the two parts is made with rectangular Wave Guides. Considerations of different nature (thermal, electromagnetic and mechanical), imposed stringent requirements on the WGs characteristics and drove their design. From the thermal point of view, the WG should guarantee good insulation between the FEM and the BEM sections to avoid overloading the cryocooler. On the other hand it is essential that the signals do not undergo excessive attenuation through the WG. Finally, given the different positions of the FEM modules behind the focal surface and the mechanical constraints given by the surrounding structures, different mechanical designs were necessary. A composite configuration of Stainless Steel and Copper was selected to satisfy all the requirements. Given the complex shape and the considerable length (about 1.5-2 m), manufacturing and testing the WGs was a challenge. This work deals with the development of the LFI WGs, including the choice of the final configuration and of the fabrication process. It also describes the testing procedure adopted to fully characterize these components from the electromagnetic point of view and the space qualification process they underwent. Results obtained during the test campaign are reported and compared with the stringent requirements. The performance of the LFI WGs is in line with requirements, and the WGs were successfully space qualified.Comment: this paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jins

    Meteorologic parameters analysis above Dome C made with ECMWF data

    Get PDF
    In this paper we present the characterization of all the principal meteorological parameters (wind speed and direction, pressure, absolute and potential temperature) extended over 25 km from the ground and over two years (2003 and 2004) above the Antarctic site of Dome C. The data set is composed by 'analyses' provided by the General Circulation Model (GCM) of the European Center for Medium Weather Forecasts (ECMWF) and they are part of the catalog MARS. A monthly and seasonal (summer and winter time) statistical analysis of the results is presented. The Richardson number is calculated for each month of the year over 25 km to study the stability/instability of the atmosphere. This permits us to trace a map indicating where and when the optical turbulence has the highest probability to be triggered on the whole troposphere, tropopause and stratosphere. We finally try to predict the best expected isoplanatic angle and wavefront coherence time employing the Richardson number maps, the wind speed profiles and simple analytical models of CN2 vertical profiles.Comment: 28 pages, 14 figures, pdf file, to be published on July 2006 - PASP, see also http://www.arcetri.astro.it/~masciad

    The Planck Telescope

    Full text link
    In this paper we present an overview of the Telescope designed for ESA's mission dedicated to map the Cosmic Microwave Background Anisotropies and Polarization. Two instruments, LFI and HFI, operate in an overall frequency range between 25 and 900 GHz and share the focal region of the 1.5 meter optimized telescope. The optimization techniques adopted for the optical design and the telescope characteristic are reported and discussed.Comment: On behalf of the Planck collaboration. 5 pages, 4 figures. The following article has been submitted for publication in the AIP Proceedings of the Workshop on "Experimental Cosmology at millimeter wavelengths", Cervinia, Italy, 9-13 July 200
    • …
    corecore