First hexagonal close packed high-entropy alloy with outstanding stability under extreme conditions and electrocatalytic activity for methanol oxidation

High-entropy alloys containing 5 and 6 platinum group metals have been prepared by thermal decomposition of single-source precursors non requiring high temperature or mechanical alloying. The prepared Ir0.19Os0.22Re0.21Rh0.20Ru0.19 alloy is the first example of a single-phase hexagonal high-entropy alloy. Heat treatment up to 1500 K and compression up to 45 GPa do not result in phase changes, a record temperature and pressure stability for a single-phase high-entropy alloy. The alloys show pronounced electrocatalytic activity in methanol oxidation, which opens a route for the use of high-entropy alloys as materials for sustainable energy conversion

Systems of subspaces of a unitary space

For a given poset, we consider its representations by systems of subspaces of a unitary space ordered by inclusion. We classify such systems for all posets for which an explicit classification is possible.Comment: 20 page

Formation and Disruption of W-Phase in High-Entropy Alloys

High-entropy alloys (HEAs) are single-phase systems prepared from equimolar or near-equimolar concentrations of at least five principal elements. The combination of high mixing entropy, severe lattice distortion, sluggish diffusion and cocktail effect favours the formation of simple phases—usually a bcc or fcc matrix with minor inclusions of ordered binary intermetallics. HEAs have been proposed for applications in which high temperature stability (including mechanical and chemical stability under high temperature and high mechanical impact) is required. On the other hand, the major challenge to overcome for HEAs to become commercially attractive is the achievement of lightweight alloys of extreme hardness and low brittleness. The multicomponent AlCrCuScTi alloy was prepared and characterized using powder X-ray diffraction (PXRD), scanning-electron microscope (SEM) and atomic-force microscope equipped with scanning Kelvin probe (AFM/SKP) techniques. Results show that the formation of complex multicomponent ternary intermetallic compounds upon heating plays a key role in phase evolution. The formation and degradation of W-phase, Al2Cu3Sc, in the AlCrCuScTi alloy plays a crucial role in its properties and stability. Analysis of as-melted and annealed alloy suggests that the W-phase is favoured kinetically, but thermodynamically unstable. The disruption of the W-phase in the alloy matrix has a positive effect on hardness (890 HV), density (4.83 g·cm−3) and crack propagation. The hardness/density ratio obtained for this alloy shows a record value in comparison with ordinary heavy refractory HEAs

Structure and magnetic property of potassium intercalated pentacene: observation of superconducting phase in KxC22H14

We report the results from systematic investigations on the structure and magnetic properties of potassium intercalated pentacene as a function of potassium content, K x C22H14 (1  ≤  x  ≤  3). Synchrotron radiation powder x-ray diffraction technique revealed that there are two different stable phases can be obtained via potassium intercalation, namely, K1C22H14 phase and K3C22H14 phase. Structural phase transition was induced when the potassium content was increased to the nominal value x  =  3. This phase transition is accompanied by drastic change in their magnetic property, where those samples with compositions K1C22H14 shows ferromagnetic behavior and those with near K3C22H14 lead to observation of superconductivity with transition temperature, T c, of 4.5 K. It is first time that superconductivity was observed in linear oligoacenes. Both magnetization study and synchrotron radiation powder x-ray diffraction clearly indicates that the superconducting phase belong to K3C22H14 as a result of phase transition from triclinic to monoclinic structure induced by chemical doping

The Earlier the Better: Structural Analysis and Separation of Lanthanides with Pyrroloquinoline Quinone

Lanthanides (Ln) are critical raw materials, however, their mining and purification have a considerable negative environmental impact and sustainable recycling and separation strategies for these elements are needed. In this study, the precipitation and solubility behavior of Ln complexes with pyrroloquinoline quinone (PQQ), the cofactor of recently discovered lanthanide (Ln) dependent methanol dehydrogenase (MDH) enzymes, is presented. In this context, the molecular structure of a biorelevant europium PQQ complex was for the first time elucidated outside a protein environment. The complex crystallizes as an inversion symmetric dimer, Eu2PQQ2, with binding of Eu in the biologically relevant pocket of PQQ. LnPQQ and Ln1Ln2PQQ complexes were characterized by using inductively coupled plasma mass spectrometry (ICP‐MS), infrared (IR) spectroscopy, 151Eu‐Mössbauer spectroscopy, X‐ray total scattering, and extended X‐ray absorption fine structure (EXAFS). It is shown that a natural enzymatic cofactor is capable to achieve separation by precipitation of the notoriously similar, and thus difficult to separate, lanthanides to some extent

The Effect of Scandium Ternary Intergrain Precipitates in Al-Containing High-Entropy Alloys

We investigate the effect of alloying with scandium on microstructure, high-temperature phase stability, electron transport, and mechanical properties of the Al2CoCrFeNi, Al0.5CoCrCuFeNi, and AlCoCrCu0.5FeNi high-entropy alloys. Out of the three model alloys, Al2CoCrFeNi adopts a disordered CsCl structure type. Both of the six-component alloys contain a mixture of body-centered cubic (bcc) and face centered cubic (fcc) phases. The comparison between in situ high-temperature powder diffraction data and ex situ data from heat-treated samples highlights the presence of a reversible bcc to fcc transition. The precipitation of a MgZn2-type intermetallic phase along grain boundaries following scandium addition affects all systems differently, but especially enhances the properties of Al2CoCrFeNi. It causes grain refinement; hardness and electrical conductivity increases (up to 20% and 14% respectively) and affects the CsCl-type → fcc equilibrium by moving the transformation to sensibly higher temperatures. The maximum dimensionless thermoelectric figure of merit (ZT) of 0.014 is reached for Al2CoCrFeNi alloyed with 0.3 wt.% Sc at 650 °C

W- rich mixed oxide solid solutions under pressure

We report high-pressure synchrotron X-ray powder diffraction data for the W-rich cubic ZrW[2-x]Mo[x]O[8] (x=0.4) up to 10 GPa with open decompression. This study shows that cubic- ZrW[1.6]Mo[0.4]O[8] transforms to orthorhombic phase at the 5.04 GPa. Pressure-induced reversable amorphization of material was observed at 8.13 GPa. The obtained data suggest that W-rich cubic ZrW[2-x]Mo[x]O[8] (x=0.4) solid solutions are more attractive for creating products working under extreme conditions and mechanic stress

A Rapid and Simple Procedure for the Establishment of Human Normal and Cancer Renal Primary Cell Cultures from Surgical Specimens

The kidney is a target organ for the toxicity of several xenobiotics and is also highly susceptible to the development of malignant tumors. In both cases, in vitro studies provide insight to cellular damage, and represent adequate models to study either the mechanisms underlying the toxic effects of several nephrotoxicants or therapeutic approaches in renal cancer. The development of efficient methods for the establishment of human normal and tumor renal cell models is hence crucial. In this study, a technically simple and rapid protocol for the isolation and culture of human proximal tubular epithelial cells and human renal tumor cells from surgical specimens is presented. Tumor and normal tissues were processed by using the same methodology, based on mechanical disaggregation of tissue followed by enzymatic digestion and cell purification by sequential sieving. The overall procedure takes roughly one hour. The resulting cell preparations have excellent viabilities and yield. Establishment of primary cultures from all specimens was achieved successfully. The origin of primary cultured cells was established through morphological evaluation. Normal cells purity was confirmed by immunofluorescent staining and reverse transcription-polymerase chain reaction analysis for expression of specific markers

High-resolution DNA copy number and gene expression analyses distinguish chromophobe renal cell carcinomas and renal oncocytomas

Contains fulltext : 80487.pdf (publisher's version ) (Open Access)BACKGROUND: The diagnosis of benign renal oncocytomas (RO) and chromophobe renal cell carcinomas (RCC) based on their morphology remains uncertain in several cases. METHODS: We have applied Affymetrix GeneChip Mapping 250 K NspI high-density oligoarrays to identify small genomic alterations, which may occur beyond the specific losses of entire chromosomes, and also Affymetrix GeneChip HG-U133 Plus2.0 oligoarrays for gene expression profiling. RESULTS: By analysing of DNA extracted from 30 chRCCs and 42 ROs, we have confirmed the high specificity of monosomies of chromosomes 1, 2, 6, 10, 13, 17 and 21 in 70-93% of the chRCCs, while ROs displayed loss of chromosome 1 and 14 in 24% and 5% of the cases, respectively. We demonstrated that chromosomal gene expression biases might correlate with chromosomal abnormalities found in chromophobe RCCs and ROs. The vast majority genes downregulated in chromophobe RCC were mapped to chromosomes 2, 6, 10, 13 and 17. However, most of the genes overexpressed in chromophobe RCCs were located to chromosomes without any copy number changes indicating a transcriptional regulation as a main event. CONCLUSION: The SNP-array analysis failed to detect recurrent small deletions, which may mark loci of genes involved in the tumor development. However, we have identified loss of chromosome 2, 10, 13, 17 and 21 as discriminating alteration between chromophobe RCCs and ROs. Therefore, detection of these chromosomal changes can be used for the accurate diagnosis in routine histology