Simultaneously non-linear energy calibration of CMS calorimeters for single pions and electrons

CMS calorimeter energy calibration was done in the full CMS simulated geometry for the pseudorapidity region eta = 0. The samples of single pion events were generated with a set of incident energies from 5 GeV to 3 TeV and for single electrons from 5 to 500 GeV. The analysis of the simulated data shows that standard calibration using just sampling coefficients for calorimeter parts with different sampling ratio gives nonlinear calorimeter response. Non-linear calibration technique was applied simultaneously for pion and electron beams which is preparation for jets energy reconstruction. It improve calorimeter energy resolution for pions and restore the calorimeter linearity.Comment: 7 pages, 2 figures, latex fil

Non-linear energy calibration of CMS calorimeters for single pions

CMS calorimeter energy calibration was done in the full CMS simulated geometry for the pseudorapidity region eta = 0. The samples of single pion events were generated with a set of incident energies from 10 GeV to 3 TeV. The analysis of the simulated data shows that standard calibration using just sampling coefficients for calorimeter parts with different sampling ratio gives nonlinear calorimeter response. Non-linear calibration technique was applied for improving calorimeter energy resolution and restoring the calorimeter linearity.Comment: 6 pages, 2 figures, latex fil

Muon Track Matching

For most physical processes the tracks observed in the muon stations must be matched with the corresponding tracks in the inner tracker, the external muon system providing muon identification and triggering but the tracker points giving the precise momentum measurement at lower momenta. For high momenta the momentum resolution is much improved by the interconnection of inner and outer measurements. The matching of outer and inner measurements is more delicate in case of muons embedded in jets. A study of the matching procedure was carried out using samples of (b, anti b) jets at high Pt, requiring (b, anti b) -> mu decays.For most physical processes the tracks observed in the muon stations must be matched with the corresponding tracks in the inner tracker, the external muon system providing muon identification and triggering but the tracker points giving the precise momentum measurement at lower momenta. For high momenta the momentum resolution is much improved by the interconnection of inner and outer measurements. The matching of outer and inner measurements is more delicate in case of muons embedded in jets. A study of the matching procedure was carried out using samples of (b, anti b) jets at high Pt, requiring (b, anti b) -> mu decays

Search for a Standard Model Higgs Boson in CMS via Vector Boson Fusion in the H->WW->l\nu l\nu Channel

We present the potential for discovering the Standard Model Higgs boson produced by the vector-boson fusion mechanism. We considered the decay of Higgs bosons into the W+W- final state, with both W-bosons subsequently decaying leptonically. The main background is ttbar with one or more jets produced. This study is based on a full simulation of the CMS detector, and up-to-date reconstruction codes. The result is that a signal of 5 sigma significance can be obtained with an integrated luminosity of 12-72 1/fb for Higgs boson masses between 130-200 GeV. In addition, the major background can be measured directly to 7% from the data with an integrated luminosity of 30 1/fb. In this study, we also suggested a method to obtain information in Higgs mass using the transverse mass distributions.Comment: 26 pages, 22 figure

CMS endcap RPC gas gap production for upgrade

The CMS experiment will install a RE4 layer of 144 new Resistive Plate Chambers (RPCs) on the existing york YE3 at both endcap regions to trigger high momentum muons from the proton-proton interaction. In this paper, we present the detailed procedures used in the production of new RPC gas gaps adopted in the CMS upgrade. Quality assurance is enforced as ways to maintain the same quality of RPC gas gaps as the existing 432 endcap RPC chambers that have been operational since the beginning of the LHC operation

Quantum noise in current biased Josephson junction

Quantum fluctuations in a current biased Josephson junction, described in terms of the RCSJ-model, are considered. The fluctuations of the voltage and phase across the junction are assumed to be initiated by equilibrium current fluctuations in the shunting resistor. This corresponds to low enough temperatures, when fluctuations of the normal current in the junction itself can be neglected. We used the quantum Langevin equation in terms of random variables related to the limit cycle of the nonlinear Josephson oscillator. This allows to go beyond the perturbation theory and calculate the widths of the Josephson radiation lines

Performance of the Gas Gain Monitoring system of the CMS RPC muon detector and effective working point fine tuning

The Gas Gain Monitoring (GGM) system of the Resistive Plate Chamber (RPC) muon detector in the Compact Muon Solenoid (CMS) experiment provides fast and accurate determination of the stability in the working point conditions due to gas mixture changes in the closed loop recirculation system. In 2011 the GGM began to operate using a feedback algorithm to control the applied voltage, in order to keep the GGM response insensitive to environmental temperature and atmospheric pressure variations. Recent results are presented on the feedback method used and on alternative algorithms

Search for the QCD critical point in nuclear collisions at the CERN SPS

Pion production in nuclear collisions at the SPS is investigated with the aim to search, in a restricted domain of the phase diagram, for power-laws in the behavior of correlations which are compatible with critical QCD. We have analyzed interactions of nuclei of different size (p+p, C+C, Si+Si, Pb+Pb) at 158$A$ GeV adopting, as appropriate observables, scaled factorial moments in a search for intermittent fluctuations in transverse dimensions. The analysis is performed for $\pi^+\pi^-$ pairs with invariant mass very close to the two-pion threshold. In this sector one may capture critical fluctuations of the sigma component in a hadronic medium, even if the $\sigma$-meson has no well defined vacuum state. It turns out that for the Pb+Pb system the proposed analysis technique cannot be applied without entering the invariant mass region with strong Coulomb correlations. As a result the treatment becomes inconclusive in this case. Our results for the other systems indicate the presence of power-law fluctuations in the freeze-out state of Si+Si approaching in size the prediction of critical QCD.Comment: 31 pages, 11 figure

The Upgrade of the CMS RPC System during the First LHC Long Shutdown

The CMS muon system includes in both the barrel and endcap region Resistive Plate Chambers (RPC). They mainly serve as trigger detectors and also improve the reconstruction of muon parameters. Over the years, the instantaneous luminosity of the Large Hadron Collider gradually increases. During the LHC Phase 1 (~first 10 years of operation) an ultimate luminosity is expected above its design value of 10^34/cm^2/s at 14 TeV. To prepare the machine and also the experiments for this, two long shutdown periods are scheduled for 2013-2014 and 2018-2019. The CMS Collaboration is planning several detector upgrades during these long shutdowns. In particular, the muon detection system should be able to maintain a low-pT threshold for an efficient Level-1 Muon Trigger at high particle rates. One of the measures to ensure this, is to extend the present RPC system with the addition of a 4th layer in both endcap regions. During the first long shutdown, these two new stations will be equipped in the region |eta|<1.6 with 144 High Pressure Laminate (HPL) double-gap RPCs operating in avalanche mode, with a similar design as the existing CMS endcap chambers. Here, we present the upgrade plans for the CMS RPC system for the fist long shutdown, including trigger simulation studies for the extended system, and details on the new HPL production, the chamber assembly and the quality control procedures.Comment: 9 pages, 6 figures, presented by M.Tytgat at the XI workshop on Resistive Plate Chambers and Related Detectors (RPC2012), INFN - Laboratori Nazionali di Frascati, February 5-10, 201

NA49 results on hadron production: indications of the onset of deconfinement ?

The NA49 experiment at the CERN SPS measured the energy and system size dependence of particle production in A+A collisions. A change of the energy dependence of several hadron production properties at low SPS energies is observed which suggests a scenario requiring the onset of deconfinement.Comment: XXXV International Symposium on Multiparticle Dynamics 200