2,752 research outputs found
Development and first operation of a Cavity Ring Down Spectroscopy diagnostic in the negative ion source SPIDER
The Neutral Beam Injectors of the ITER experiment will rely on negative ion
sources to produce 16.7 MW beams of H/D particles accelerated at 1 MeV. The
prototype of these sources was built and is currently operated in the SPIDER
experiment (Source for the Production of Ions o Deuterium Extracted from an RF
plasma), part of the Neutral Beam Test Facility of Consorzio RFX, Padua. In
SPIDER, the H-/D- ion source is coupled to a three grids 100 kV acceleration
system. One of the main targets of the experimentation in SPIDER is to
uniformly maximize the extracted current density; to achieve this it is
important to study the density of negative ions available in proximity of the
ion acceleration system. In SPIDER, line-integrated measurements of negative
ion density are performed by a Cavity Ring Down Spectroscopy (CRDS) diagnostic.
Its principle of operation is based on the absorption of the photons of a laser
beam pulse by H-/D- photo-detachment; the absorption detection is enhanced by
trapping the laser pulse in an optical cavity, containing the absorbing medium
(i.e. negative ions). The paper presents and discusses the CRDS diagnostic
setup in SPIDER, including the first measurements of negative ion density,
correlated to the main source parameters.Comment: 5 pages, 7 figures. Contributer paper for the HTPD 2020 conference.
Accepted manuscrip
Optical detection and spatial modulation of mid-infrared surface plasmon polaritons in a highly doped semiconductor
Highly doped semiconductors (HDSCs) are promising candidates for plasmonic applications in the mid-infrared (MIR) spectral range. This work examines a recent addition to the HDSC family, the dilute nitride alloy In(AsN). Post-growth hydrogenation of In(AsN) creates a highly conducting channel near the surface and a surface plasmon polariton detected by attenuated total reflection techniques. The suppression of plasmonic effects following a photo-annealing of the semiconductor is attributed to the dissociation of the N-H bond. This offers new routes for direct patterning of MIR plasmonic structures by laser writing
Atherosclerotic Cardiovascular Disease Events in Adults With CKD Taking a Moderate- or High-Intensity Statin: The Chronic Renal Insufficiency Cohort (CRIC) Study
Rationale & Objective: The 2018 American Heart Association/American College of Cardiology (AHA/ACC) cholesterol guideline uses risk stratification to guide the decision to initiate nonstatin lipid-lowering medication among adults with atherosclerotic cardiovascular disease (CVD). We determined atherosclerotic CVD (ASCVD) event rates among adults with chronic kidney disease (CKD) taking statin therapy within 2018 AHA/ACC cholesterol guideline risk categories. Study Design: Observational cohort study. Setting & Participants: Adults with CKD not on dialysis in the Chronic Renal Insufficiency Cohort (CRIC) study who were taking a moderate/high-intensity statin 1 year after enrollment (baseline for the current analysis, n = 1,753). Exposure: 2018 AHA/ACC cholesterol guideline risk categories: without a history of ASCVD, a history of 1 major ASCVD event and multiple high-risk conditions, and a history of ≥2 major ASCVD events. Outcome: Adjudicated ASCVD events after the year 1 study visit. Analytical Approach: We calculated age-sex standardized rates for ASCVD events and age-sex adjusted hazard ratios for ASCVD events accounting for the competing risk of death. Results: There were 394 ASCVD events over a median follow-up period of 8 years. The ASCVD event rates (with 95% CI) per 1,000 person-years among participants without a history of ASCVD, with a history of 1 major ASCVD event and multiple high-risk conditions, and with a history of ≥2 major ASCVD events were 21.7 (18.4-25.1), 45.0 (37.8-52.3), and 73.3 (53.3-93.4), respectively. Compared with participants without a history of ASCVD, the HR (95% CI) rates for ASCVD events among those with a history of 1 major ASCVD event and multiple high-risk conditions, and with a history of ≥2 major ASCVD events were 1.89 (1.52-2.36) and 2.50 (1.85-3.39), respectively. Limitations: Data on whether participants were taking a maximally tolerated statin dosage were unavailable. Conclusions: The 2018 AHA/ACC cholesterol guideline identifies adults with CKD who have very high ASCVD risk despite taking a moderate/high-intensity statin
Binding Energy of Charged Excitons in ZnSe-based Quantum Wells
Excitons and charged excitons (trions) are investigated in ZnSe-based quantum
well structures with (Zn,Be,Mg)Se and (Zn,Mg)(S,Se) barriers by means of
magneto-optical spectroscopy. Binding energies of negatively () and positively
(X+) charged excitons are measured as functions of quantum well width, free
carrier density and in external magnetic fields up to 47 T. The binding energy
of shows a strong increase from 1.4 to 8.9 meV with decreasing quantum well
width from 190 to 29 A. The binding energies of X+ are about 25% smaller than
the binding energy in the same structures. The magnetic field behavior of and
X+ binding energies differ qualitatively. With growing magnetic field strength,
increases its binding energy by 35-150%, while for X+ it decreases by 25%.
Zeeman spin splittings and oscillator strengths of excitons and trions are
measured and discussed
Start of SPIDER operation towards ITER neutral beams
Heating Neutral Beam (HNB) Injectors will constitute the main plasma heating and current drive tool both in ITER and JT60-SA, which are the next major experimental steps for demonstrating nuclear fusion as viable energy source. In ITER, in order to achieve the required thermonuclear fusion power gain Q=10 for short pulse operation and Q=5 for long pulse operation (up to 3600s), two HNB injectors will be needed [1], each delivering a total power of about 16.5 MW into the magnetically-confined plasma, by means of neutral hydrogen or deuterium particles having a specific energy of about 1 MeV. Since only negatively charged particles can be efficiently neutralized at such energy, the ITER HNB injectors [2] will be based on negative ions, generated by caesium-catalysed surface conversion of atoms in a radio-frequency driven plasma source. A negative deuterium ion current of more than 40 A will be extracted, accelerated and focused in a multi-aperture, multi-stage electrostatic accelerator, having 1280 apertures (~ 14 mm diam.) and 5 acceleration stages (~200 kV each) [3]. After passing through a narrow gas-cell neutralizer, the residual ions will be deflected and discarded, whereas the neutralized particles will continue their trajectory through a duct into the tokamak vessels to deliver the required heating power to the ITER plasma for a pulse duration of about 3600 s. Although the operating principles and the implementation of the most critical parts of the injector have been tested in different experiments, the ITER NBI requirements have never been simultaneously attained. In order to reduce the risks and to optimize the design and operating procedures of the HNB for ITER, a dedicated Neutral Beam Test Facility (NBTF) [4] has been promoted by the ITER Organization with the contribution of the European Union\u2019s Joint Undertaking for ITER and of the Italian Government, with the participation of the Japanese and Indian Domestic Agencies (JADA and INDA) and of several European laboratories, such as IPP-Garching, KIT-Karlsruhe, CCFE-Culham, CEA-Cadarache. The NBTF, nicknamed PRIMA, has been set up at Consorzio RFX in Padova, Italy [5]. The planned experiments will verify continuous HNB operation for one hour, under stringent requirements for beam divergence (< 7 mrad) and aiming (within 2 mrad). To study and optimise HNB performances, the NBTF includes two experiments: MITICA, full-scale NBI prototype with 1 MeV particle energy and SPIDER, with 100 keV particle energy and 40 A current, aiming at testing and optimizing the full-scale ion source. SPIDER will focus on source uniformity, negative ion current density and beam optics. In June 2018 the experimental operation of SPIDER has started
How do NHS organisations plan research capacity development? Strategies, strengths, and opportunities for improvement
Research that is integral into a 'learning healthcare system' can promote cost effective services and knowledge creation. As such, research is defined as a 'core function' in UK health service organisations, and is often planned through research and development (R&D) strategies that aim to promote research activity and research capacity development (RCD). The discussion focuses around the content of ten R&D strategies for healthcare organisations in England and Scotland, with respect to RCD. These organisations were engaged with a research interest network called ACORN (Addressing Organisational Capacity to do Research Network) that included two Scottish Health Boards, four community and mental health trusts, two provincial district hospitals, and two teaching hospitals. We undertook a thematic documentary analysis of the R&D strategies which identified 11 'core activities' of RCD. The potential for building research capacity in these 'core activities' was established by reviewing them through the lens of a RCD framework. Core activities aimed to 'hard wire' RCD into health organisations. They demonstrated a complex interplay between developing a strong internal organisational infrastructure, and supporting individual career planning and skills development, in turn enabled by organisational processes. They also included activities to build stronger inter-organisational relationships and networks. Practitioner, manager and patient involvement was a cross cutting theme. The potential to demonstrate progress was included in plans through monitoring activity across all RCD principles. Strategies were primarily aimed at research production rather than research use. Developing 'actionable dissemination' was poorly addressed in the strategies, and represents an area for improvement. We describe strengths of RCD planning activities, and opportunities for improvement. We explore how national policy and research funders can influence health systems' engagement in research
Recommended from our members
Measurement of the Higgs boson width and evidence of its off-shell contributions to ZZ production
Since the discovery of the Higgs boson in 2012, detailed studies of its properties have been ongoing. Besides its mass, its width—related to its lifetime—is an important parameter. One way to determine this quantity is to measure its off-shell production, where the Higgs boson mass is far away from its nominal value, and relating it to its on-shell production, where the mass is close to the nominal value. Here we report evidence for such off-shell contributions to the production cross-section of two Z bosons with data from the CMS experiment at the CERN Large Hadron Collider. We constrain the total rate of the off-shell Higgs boson contribution beyond the Z boson pair production threshold, relative to its standard model expectation, to the interval [0.0061, 2.0] at the 95% confidence level. The scenario with no off-shell contribution is excluded at a p-value of 0.0003 (3.6 standard deviations). We measure the width of the Higgs boson as ΓH=3.2−1.7+2.4MeV, in agreement with the standard model expectation of 4.1 MeV. In addition, we set constraints on anomalous Higgs boson couplings to W and Z boson pairs
MicroRNA expression profiles during cotton (Gossypium hirsutum L) fiber early development
The role of microRNAs (miRNAs) during cotton fiber development remains unclear. Here, a total of
54 miRNAs belonging to 39 families were selected to characterize miRNA regulatory mechanism in eight different fiber development stages in upland cotton cv BM-1. Among 54 miRNAs, 18 miRNAs were involved in cotton fiber initiation and eight miRNAs were related to fiber elongation and secondary wall biosynthesis. Additionally, 3,576 protein-coding genes were candidate target genes
of these miRNAs, which are potentially involved in cotton fiber development. We also investigated
the regulatory network of miRNAs and corresponding targets in fiber initiation and elongation, and secondary wall formation. Our Gene Ontology-based term classification and KEGG-based pathway enrichment analyses showed that the miRNA targets covered 220 biological processes, 67 molecular functions, 45 cellular components, and 10 KEGG pathways. Three of ten KEGG pathways were involved in lignan synthesis, cell elongation, and fatty acid biosynthesis, all of which have important roles in fiber development. Overall, our study shows the potential regulatory roles of miRNAs in cotton fiber development and the importance of miRNAs in regulating different cell types. This is helpful to design miRNA-based biotechnology for improving fiber quality and yield
Recommended from our members
Search for top squarks in the four-body decay mode with single lepton final states in proton-proton collisions at √s = 13 TeV
A preprint version of the article is available at arXiv:2301.08096v2 [hep-ex], https://arxiv.org/abs/2301.08096 . Comments: Replaced with the published version. Added the journal reference and the DOI. All the figures and tables can be found at https://cms-results.web.cern.ch/cms-results/public-results/publications/SUS-21-003 (CMS Public Pages).A search for the pair production of the lightest supersymmetric partner of the top quark, the top squark (t ~1), is presented. The search targets the four-body decay of the t ~1 , which is preferred when the mass difference between the top squark and the lightest supersymmetric particle is smaller than the mass of the W boson. This decay mode consists of a bottom quark, two other fermions, and the lightest neutralino (χ~10), which is assumed to be the lightest supersymmetric particle. The data correspond to an integrated luminosity of 138 fb−1 of proton-proton collisions at a center-of-mass energy of 13 TeV collected by the CMS experiment at the CERN LHC. Events are selected using the presence of a high-momentum jet, an electron or muon with low transverse momentum, and a significant missing transverse momentum. The signal is selected based on a multivariate approach that is optimized for the difference between m(t ~1) and m(χ~10). The contribution from leading background processes is estimated from data. No significant excess is observed above the expectation from standard model processes. The results of this search exclude top squarks at 95% confidence level for masses up to 480 and 700 GeV for m(t ~1) − m(χ~10) = 10 and 80 GeV, respectively. [Figure not available: see fulltext.].SCOAP3
A combined functional and structural genomics approach identified an EST-SSR marker with complete linkage to the Ligon lintless-2 genetic locus in cotton (Gossypium hirsutum L.)
<p>Abstract</p> <p>Background</p> <p>Cotton fiber length is an important quality attribute to the textile industry and longer fibers can be more efficiently spun into yarns to produce superior fabrics. There is typically a negative correlation between yield and fiber quality traits such as length. An understanding of the regulatory mechanisms controlling fiber length can potentially provide a valuable tool for cotton breeders to improve fiber length while maintaining high yields. The cotton (<it>Gossypium hirsutum </it>L.) fiber mutation Ligon lintless-2 is controlled by a single dominant gene (<it>Li<sub>2</sub></it>) that results in significantly shorter fibers than a wild-type. In a near-isogenic state with a wild-type cotton line, <it>Li<sub>2 </sub></it>is a model system with which to study fiber elongation.</p> <p>Results</p> <p>Two near-isogenic lines of Ligon lintless-2 (<it>Li<sub>2</sub></it>) cotton, one mutant and one wild-type, were developed through five generations of backcrosses (BC<sub>5</sub>). An F<sub>2 </sub>population was developed from a cross between the two <it>Li<sub>2 </sub></it>near-isogenic lines and used to develop a linkage map of the <it>Li<sub>2 </sub></it>locus on chromosome 18. Five simple sequence repeat (SSR) markers were closely mapped around the <it>Li<sub>2 </sub></it>locus region with two of the markers flanking the <it>Li<sub>2 </sub></it>locus at 0.87 and 0.52 centimorgan. No apparent differences in fiber initiation and early fiber elongation were observed between the mutant ovules and the wild-type ones. Gene expression profiling using microarrays suggested roles of reactive oxygen species (ROS) homeostasis and cytokinin regulation in the <it>Li<sub>2 </sub></it>mutant phenotype. Microarray gene expression data led to successful identification of an EST-SSR marker (NAU3991) that displayed complete linkage to the <it>Li<sub>2 </sub></it>locus.</p> <p>Conclusions</p> <p>In the field of cotton genomics, we report the first successful conversion of gene expression data into an SSR marker that is associated with a genomic region harboring a gene responsible for a fiber trait. The EST-derived SSR marker NAU3991 displayed complete linkage to the <it>Li<sub>2 </sub></it>locus on chromosome 18 and resided in a gene with similarity to a putative plectin-related protein. The complete linkage suggests that this expressed sequence may be the <it>Li<sub>2 </sub></it>gene.</p
- …