2,246 research outputs found
Towards a shared method to classify contaminated territories in the case of an accidental nuclear event: the PRIME project
The analysis of the management of the accidentally radioactive contaminated areas such as those around Chernobyl nuclear power plant highlights the fact that the current spatial classification methods hardly help in recovering proper use of the contaminated territory.
The cause is mainly to be searched for in the traditional construction of risks assessment methods; these methods rest on criteria defined by institutional experts, which are not applicable in practise because they are not shared by all the stakeholders involved in the management of the contaminated territories.
Opposite such top-down tentative management, local efforts supported by Non-Governmental Organizations to restore life in the contaminated area seem to be more fruitful but very time and resources consuming and limited to the specific areas where they are experimented. The aim of the PRIME project, in progress at the French Institute for Radioprotection and Nuclear Safety, is to mix the advantages of both approaches in building a multicriteria decision tool based on the territorial specificities.
The criteria of the method are chosen and weighted with representatives of the territory’s stakeholders (decision makers, local actors and experts) to warrant that all the points of view are taken into account and to enable the risk managers to choose the appropriate strategy in case of an accident involving radioactive substances.
The area chosen for the pilot study is a 50 km radius territory around the nuclear sites of Tricastin-Pierrelatte in the lower valley of Rhône (France). One of the exploration questions of the PRIME project is whether a multicriteria method may be an appropriate tool to treat the data and make them visible and accessible for all the stakeholders
A combined FEG-SEM and TEM study of silicon nanodot assembly
Nanodots forming dense assembly on a substrate are difficult to characterize in terms of size, density, morphology and cristallinity. The present study shows how valuable information can be obtained by a combination of electron microscopy techniques. A silicon nanodots deposit has been studied by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) to estimate essentially the dot size and density, quantities emphasized because of their high interest for application. High resolution SEM indicates a density of 1.6 × 1012 dots/cm2 for a 5 nm to 10 nm dot size. TEM imaging using a phase retrieval treatment of a focus series gives a higher dot density (2 × 1012 dots/cm2) for a 5 nm dot size. High Resolution Transmission Electron Microscopy (HRTEM) indicates that the dots are crystalline which is confirmed by electron diffraction. According to HRTEM and electron diffraction, the dot size is about 3 nm which is significantly smaller than the SEM and TEM results. These differences are not contradictory but attributed to the fact that each technique is probing a different phenomenon. A core-shell structure for the dot is proposed which reconcile all the results. All along the study, Fourier transforms have been widely used under many aspects
A neutron diffraction study of the oxygen diffusion in molybdenum doped Ba2InO5
International audienceThe structures of molybdenum doped Ba2In2O5 were refined using X-ray and neutron diffraction data at room and high temperature with the aim to derive preferred oxygen diffusion pathways. At room temperature, refinement of composition Ba2In2-xMoxO5+3x/2 with x=0.1 revealed molybdenum atoms are preferentially located in the tetrahedral layers of the brownmillerite. At 700°C, the structure can be viewed as the stacking of alternating In and In/Mo octahedral layers. The conduction process occurs preferentially in the later which is highly oxygen deficient. Preferred oxygen diffusion pathways were deduced from Joint Probability Density Function (JPDF) and energy barriers were derived. It was in good agreement with the activation energy deduced from impedance spectroscopy for composition x=0.1 at 950°C. However, calculation of energy barrier assumes a dynamic disorder of oxide ions which is unlikely to occur at lower temperature and for sample containing a larger amount of molybdenum. Composition x=0.5 is cubic on the whole range of temperature. At room temperature, JPDF revealed a static disorder of the oxygen atoms, which is likely due to the solution of molybdenum into the barium indium perovskite. When temperature increases the disorder becomes more and more dynamic
The anterior cribriform plate foramina: from anatomy to surgery
Background: Despite the development of anterior skull base surgery, the anatomy of the nasal bone
and anterior cribriform plate remains unclear. A recent study confirmed 2 distinct foramina in the anterior part
of the cribriform plate: the ethmoidal slit (ES) and the cribroethmoidal foramen (CF). The aim of this study
was to specify their content, their anatomic relationship to the frontal sinus and skull base, and their potential
value in skull base surgery.
Methods: Dissections were performed on 36 cadaver heads. Macro- and microscopic examinations
were carried out. Microcomputed tomography scans contrasted with osmium were performed to identify
vessels and nerves. Histology with neural, meningeal, or luteinizing hormone-releasing hormone
immunomarkers was performed on the content of the foramina. Finally, endonasal surgical dissections were
carried out.
Results: The ES and the CF were observed in all cases. They measured a mean of 4.2 and 1.6 mm,
respectively. The ES contained dura mater, arachnoid tissues, lymphatics, and the terminal nerve. The CF
contained the anterior ethmoidal nerve and artery. This foramen continued forward with the cribroethmoidal
groove, which measured a mean of 2.5 mm. This groove was under the frontal sinus and in front of the skull
base. We also described a "cribroethmoidal canal" and a "nasal bone foramen." Clinical applications are
discussed.
Conclusion: The clinical applications of this new anatomic description concern both the cribriform
plate and frontal sinus surgeries. Identifying the terminal nerve passing through the ES is a step forward in
understanding pheromone recognition in humans
The anterior cribriform plate foramina: from anatomy to surgery
Background: Despite the development of anterior skull base surgery, the anatomy of the nasal bone
and anterior cribriform plate remains unclear. A recent study confirmed 2 distinct foramina in the anterior part
of the cribriform plate: the ethmoidal slit (ES) and the cribroethmoidal foramen (CF). The aim of this study
was to specify their content, their anatomic relationship to the frontal sinus and skull base, and their potential
value in skull base surgery.
Methods: Dissections were performed on 36 cadaver heads. Macro- and microscopic examinations
were carried out. Microcomputed tomography scans contrasted with osmium were performed to identify
vessels and nerves. Histology with neural, meningeal, or luteinizing hormone-releasing hormone
immunomarkers was performed on the content of the foramina. Finally, endonasal surgical dissections were
carried out.
Results: The ES and the CF were observed in all cases. They measured a mean of 4.2 and 1.6 mm,
respectively. The ES contained dura mater, arachnoid tissues, lymphatics, and the terminal nerve. The CF
contained the anterior ethmoidal nerve and artery. This foramen continued forward with the cribroethmoidal
groove, which measured a mean of 2.5 mm. This groove was under the frontal sinus and in front of the skull
base. We also described a "cribroethmoidal canal" and a "nasal bone foramen." Clinical applications are
discussed.
Conclusion: The clinical applications of this new anatomic description concern both the cribriform
plate and frontal sinus surgeries. Identifying the terminal nerve passing through the ES is a step forward in
understanding pheromone recognition in humans
Nuclear break-up of 11Be
The break-up of 11Be was studied at 41AMeV using a secondary beam of 11Be
from the GANIL facility on a 48Ti target by measuring correlations between the
10Be core, the emitted neutrons and gamma rays. The nuclear break-up leading to
the emission of a neutron at large angle in the laboratory frame is identified
with the towing mode through its characteristic n-fragment correlation. The
experimental spectra are compared with a model where the time dependent
Schrodinger equation (TDSE) is solved for the neutron initially in the 11 Be. A
good agreement is found between experiment and theory for the shapes of neutron
experimental energies and angular distributions. The spectroscopic factor of
the 2s orbital is tentatively extracted to be 0.46+-0.15. The neutron emission
from the 1p and 1d orbitals is also studied
Structure, pinning and supercurrent in YBa2Cu307 films and ReBa2Cu307 multilayers
High quality YBa2Cu3O7 (YBCO) films and multilayers of ReBa2Cu3O7 superconductors, where Re is rare earth elements (Y and Nd), have been prepared by pulsed laser deposition. Pinning characteristics of the structures obtained have been analysed and attributed to growth conditions and corresponding structural peculiarities. Relatively thick (~1 µm) multilayers exhibit better performance than mono-layer YBCO films having arbitrary thickness. differences in the films and multilayers are discussed in terms of their structure homogeneity and defects induced by the growth of the layers
Recommended from our members
Nonlinear whistler wave scattering in space plasmas
In this paper the evolution of nonlinear scattering of whistler mode waves by kinetic Alfven waves (KAW) in time and two spatial dimensions is studied analytically. The authors suggest this nonlinear process as a mechanism of kinetic Alfven wave generation in space plasmas. This mechanism can explain the dependence of Alfven wave generation on whistler waves observed in magnetospheric and ionospheric plasmas. The observational data show a dependence for the generation of long periodic pulsations Pc5 on whistler wave excitation in the auroral and subauroral zone of the magnetosphere. This dependence was first observed by Ondoh T.I. For 79 cases of VLF wave excitation registered by Ondoh at College Observatory (L=64.6 N), 52 of them were followed by Pc5 geomagnetic pulsation generation. Similar results were obtained at the Loparskaia Observatory (L=64 N) for auroral and subauroral zone of the magnetosphere. Thus, in 95% of the cases when VLF wave excitation occurred the generation of long periodic geomagnetic pulsations Pc5 were observed. The observations also show that geomagnetic pulsations Pc5 are excited simultaneously or insignificantly later than VLF waves. In fact these two phenomena are associated genetically: the excitation of VLF waves leads to the generation of geomagnetic pulsations Pc5. The observations show intensive generation of geomagnetic pulsations during thunderstorms. Using an electromagnetic noise monitoring system covering the ULF range (0.01-10 Hz) A.S. Fraser-Smith observed intensive ULF electromagnetic wave during a large thunderstorm near the San-Francisco Bay area on September 23, 1990. According to this data the most significant amplification in ULF wave activity was observed for waves with a frequency of 0.01 Hz and it is entirely possible that stronger enhancements would have been measured at lower frequencies
New insight into the low-energy He spectrum
The spectrum of He was studied by means of the He(,)He
reaction at a lab energy of 25 MeV/n and small center of mass (c.m.) angles.
Energy and angular correlations were obtained for the He decay products by
complete kinematical reconstruction. The data do not show narrow states at
1.3 and 2.4 MeV reported before for He. The lowest resonant
state of He is found at about 2 MeV with a width of 2 MeV and is
identified as . The observed angular correlation pattern is uniquely
explained by the interference of the resonance with a virtual state
(limit on the scattering length is obtained as fm), and with
the resonance at energy MeV.Comment: 5 pages, 4 figures, 2 table
Modeling spinal locomotor circuits for movements in developing zebrafish
Many spinal circuits dedicated to locomotor control have been identified in the developing zebrafish. How these circuits operate together to generate the various swimming movements during development remains to be clarified. In this study, we iteratively built models of developing zebrafish spinal circuits coupled to simplified musculoskeletal models that reproduce coiling and swimming movements. The neurons of the models were based upon morphologically or genetically identified populations in the developing zebrafish spinal cord. We simulated intact spinal circuits as well as circuits with silenced neurons or altered synaptic transmission to better understand the role of specific spinal neurons. Analysis of firing patterns and phase relationships helped to identify possible mechanisms underlying the locomotor movements of developing zebrafish. Notably, our simulations demonstrated how the site and the operation of rhythm generation could transition between coiling and swimming. The simulations also underlined the importance of contralateral excitation to multiple tail beats. They allowed us to estimate the sensitivity of spinal locomotor networks to motor command amplitude, synaptic weights, length of ascending and descending axons, and firing behavior. These models will serve as valuable tools to test and further understand the operation of spinal circuits for locomotion
- …